What Causes the Abnormal Noise When Shifting Gears and Accelerating?

1 Answers
LeilaMarie
07/24/25 7:29pm
The causes and solutions for abnormal noise when shifting gears and accelerating are as follows: 1. Engine noise Solution: Most engine-related noises cannot be resolved by the owner and are best addressed by sending the vehicle to a repair shop for inspection. 2. Transmission noise Solution: It is recommended to send the vehicle to a professional repair shop to identify the faulty component and replace it. 3. Wear-related noise Solution: If the noise comes from door hinges or limiters, a specialized door hinge and slide lubricant can be used. For internal door components such as window regulators, door lock mechanisms, and handle mechanisms, a specialized door accessory lubricant should be used.
Was this review help?
15
1
Share
More Forum Discussions

Is the OBD Fault Light Serious?

obd fault light indicates excessive exhaust emissions but does not affect engine power. The OBD system continuously monitors whether the vehicle's exhaust exceeds standards during engine operation and issues an immediate warning if levels are exceeded. When a system malfunction occurs, the fault light or check engine warning light illuminates, while the powertrain control module stores the fault information in memory. The trouble code can be read from the PCM through specific procedures. Based on the trouble code prompts, maintenance personnel can quickly and accurately determine the nature and location of the fault. More details are as follows: 1. Repair OBD system faults promptly. Annual vehicle inspections have limited effectiveness in controlling automotive emissions. However, with OBD installed, the situation is completely different as it allows continuous monitoring of the vehicle's emission levels. 2. If emissions fail to meet standards, the OBD will issue a warning to promptly notify the driver to seek repairs. The most critical aspect of Euro III standards is the use of OBD.
6
2
Share

Which region does the license plate 'Yue' belong to?

Yue is the license plate code for Guangdong Province. The license plate codes for various regions in Guangdong Province are as follows: Yue A is Guangzhou, Yue B is Shenzhen, Yue C is Zhuhai, Yue D is Shantou, Yue E is Foshan, Yue F is Shaoguan, Yue G is Zhanjiang, Yue H is Zhaoqing, Yue J is Jiangmen, Yue K is Maoming, Yue L is Huizhou, Yue M is Meizhou, Yue P is Heyuan, Yue Q is Yangjiang, Yue R is Qingyuan, Yue S is Dongguan, Yue T is Zhongshan, etc. The first Chinese character on a license plate represents the abbreviation of the province, displayed on plates mounted at the front and rear of the vehicle. These plates are made of materials such as aluminum, iron, plastic, or paper, and they display the vehicle's registration number, registration region, and other relevant information.
17
0
Share

How to Identify Turbocharger Damage?

Turbocharger damage can be identified by the following methods: 1. Blue or white smoke from the exhaust pipe; 2. Decreased power; 3. Increased fuel consumption; 4. Increased oil consumption; 5. Presence of metal friction sounds; 6. Oil leakage in the turbo intercooler pipes; 7. Blockage in the exhaust gas recirculation pipe. A turbocharger is a technology that uses exhaust gases generated by internal combustion engines to drive an air compressor. Common causes of turbocharger failure include: 1. Insufficient lubricating oil pressure and flow; 2. Debris or sediment entering the lubrication system, causing oil oxidation and deterioration; 3. Blockage in the turbocharger oil return pipe, leading to excessive oil accumulation in the intermediate support of the rotor assembly and flowing into the compressor impeller along the rotor shaft.
10
1
Share

What transmission does the Haval F7 use?

Haval F7 is equipped with a dual-clutch transmission (DCT). The dual-clutch automatic transmission can be categorized by the number of gears, which is 7, hence referred to as a 7-speed dual-clutch transmission. In terms of operation, the dual-clutch automatic transmission still falls under the category of automatic transmissions, but differs from hydraulic automatic transmissions in internal structure and shifting methods. Below are details about the transmission: 1. It relies on switching gears with different gear ratios between shafts to change the transmission ratio, and the device responsible for disengaging or engaging power is also through the clutch located at the input end of the transmission. 2. The shifting speed and quality of the dual-clutch automatic transmission are better than those of AMT transmissions. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixed or stepped changes in the transmission ratio between the output and input shafts, also known as a gearbox. The transmission consists of a gear transmission mechanism and a control mechanism, and some vehicles also have a power take-off mechanism.
4
1
Share

What is the motor power of the NIO ES6?

NIO ES6's motor has a maximum power of 320kw. Here is some relevant information about the NIO ES6: NIO ES6's motor: The NIO ES6 is equipped with a permanent magnet synchronous motor with a maximum power of 320kw and a maximum torque of 610 Nm. As a pure electric SUV, the power of this motor in the NIO ES6 is more than sufficient. NIO ES6 versions: There are two versions of the NIO ES6: a standard version and a performance version. The standard version has a maximum range of 420km, while the performance version has a maximum range of 510km. The ES6's battery has seen significant improvements in both capacity and energy density. Additionally, the redesign and layout of the front and rear motors in this model enhance the vehicle's overall range. In two-wheel drive mode, the rear motor's drag protection system activates, further improving the vehicle's comprehensive range.
20
0
Share

Is Volkswagen's Dry Dual-Clutch Transmission Durable?

Overall, it is not very durable. The introduction of the dry dual-clutch transmission is as follows: 1. The dry clutch was relatively durable more than a decade ago, but as modern car engines produce increasingly higher power output, the inherent flaw of insufficient heat dissipation in dry clutches has become more apparent. 2. Since the dry dual-clutch operates in an exposed environment, its heat dissipation relies on a few small holes in the clutch housing. However, during driving, the transmission frequently shifts gears, which necessitates constant engagement of the clutch. 3. Prolonged low-speed driving and excessively frequent starts and stops cause the clutch temperature to rise continuously. At low speeds, the air flow efficiency is poor, making it difficult to effectively dissipate the heat from the clutch. This leads to a continuous increase in internal clutch temperature, accelerating wear and tear.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.