···
Log in / Register

What Causes the Abnormal Noise When Braking Hard with the Pedal Fully Pressed?

4 Answers
VonAdrian
08/30/25 8:16am

Abnormal noise when braking hard with the pedal fully pressed may be caused by poor-quality brake pads, foreign objects entering the brake disc, or severe wear on the brake disc. Poor-quality brake pads: Substandard brake pads can produce abnormal noise during braking and may also damage the brake disc. It is recommended to replace them with genuine brake pads at an authorized 4S dealership. Foreign objects entering the brake disc: When driving on rough roads, wheels can easily kick up stones or other debris. If a stone gets lodged between the brake pad and the brake disc, it can cause abnormal noise during braking. The foreign object should be promptly removed. Severe wear on the brake disc: When brake pads rub against a severely worn brake disc, abnormal noise can also occur. The brake disc should be replaced as soon as possible.

Was this review help?
1
3
Share
AnthonyLee
09/12/25 5:09am

When you hear abnormal noises during emergency braking with the pedal fully depressed, it's usually a sign of worn brake pads or surface hardening. I experienced similar issues right after installing new brake pads – those sharp squeals were particularly nerve-wracking, caused by incomplete bedding-in of the friction material where metal particles rub. If the noise persists, it likely indicates scratched or warped brake discs, possibly from road debris getting lodged or daily corrosion creating grooves. In more severe cases, it could point to caliper malfunction or hydraulic pressure instability causing vibration sounds. Next time the noise occurs, note its frequency – does it happen only during hard braking or during normal driving too? This helps technicians diagnose faster. Safety first – don't delay, get it inspected immediately. Replacing components will solve it, since brake systems are literally life-and-death equipment.

Was this review help?
11
0
Share
Expand All
LaElisa
10/26/25 5:57am

Hearing strange noises during emergency braking is truly unsettling, and I must say this issue shouldn't be taken lightly. Reflecting on my own experience, it's often caused by excessively worn brake pads - when the metal backing plate scrapes against the rotor, it produces a screeching sound, which in severe cases can lead to longer braking distances. Another possibility could be rust or debris accumulation on the rotor surface, especially noticeable during rainy-day braking. For newer vehicles, the gear sounds from ABS system activation might be misinterpreted as abnormal noises. For safety's sake, when encountering this situation, immediately slow down and stop to inspect. Don't delay visiting a repair shop - their diagnostic equipment can quickly identify the root cause, and early repairs can prevent the risk of roadside breakdowns.

Was this review help?
6
1
Share
Expand All
StAmelia
12/09/25 6:17am

Sudden hard braking causing squealing noise is common in older vehicles. I noticed a similar issue when driving my friend's modified car. The reasons are straightforward: worn brake pads or uneven surfaces increase friction during hard braking, resulting in squeaks. It could also be small stones stuck between the pads and rotors, often caused by inadequate cleaning after car washes. If the noise resembles metal scraping, immediately check pad thickness; replace them if worn—it's inexpensive and improves braking performance. Additionally, maintaining clean tires is crucial; regular dust removal can prevent noise occurrence. Frequent squealing warrants attention—don't wait until complete failure to regret it.

Was this review help?
4
1
Share
Expand All
More Forum Discussions

How to Use the Four Driving Modes of the GS8?

gs8 four driving modes usage method is: The transmission has 4 driving modes. After switching the ignition to the "ON" position, press the driving mode button on the gear shift panel repeatedly to cycle through the modes in the order of "D, E, M, W, D". The GS8 is a mid-size SUV under GAC Motor, with a length, width, and height of 4835mm, 1910mm, and 1785mm respectively, and a wheelbase of 2800mm. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 185kW and a maximum torque of 390Nm, paired with a 6-speed automatic transmission.
17
3
Share

How to solve the issue of BYD G6 smart key not being detected?

If the BYD G6 smart key cannot be detected, it may be due to a dead battery in the key or electromagnetic interference near the vehicle. In this case, press any button on the key to test whether the indicator light turns on. If there is no light, it indicates that the key battery is dead and needs to be replaced. The BYD G6 is a mid-size 4-door 5-seater sedan with dimensions of 4860mm in length, 1825mm in width, and 1463mm in height, and a wheelbase of 2745mm. It is equipped with a 5-speed manual transmission and has a fuel tank capacity of 65L. The engine delivers a maximum torque of 186 Nm, with the maximum torque achieved between 4000 to 4500 rpm. The tire specification is 205/60R16.
10
4
Share

What does the 2020 Audi A6 maintenance schedule include?

Audi A6 requires an engine oil maintenance when the driving mileage reaches 15,000 kilometers, and a brake fluid replacement maintenance when the driving mileage exceeds 30,000 kilometers. Additional details are as follows: 1. Vehicle maintenance areas: Vehicles need regular maintenance, which refers to the preventive work of inspecting, cleaning, lubricating, adjusting, or replacing related parts of the vehicle on a regular basis. This mainly includes the maintenance scope of the engine system, transmission system, cooling system, etc. Through maintenance, the vehicle can maintain a clean and normal technical condition, eliminate potential safety hazards, and extend the vehicle's service life. 2. Vehicle maintenance content: Vehicle maintenance mostly includes minor maintenance and major maintenance. Minor maintenance refers to some routine maintenance items performed after the vehicle has been driven a certain distance to ensure its performance. Major maintenance is performed when the vehicle reaches a specified mileage, including the replacement of engine oil, engine oil filter, gasoline filter, etc.
15
3
Share

How to Install the Wiper Blades on a Nissan Sylphy?

Nissan Sylphy wiper blade installation method: When removing, first push the wiper blade towards the base of the wiper arm until it completely detaches from the wiper arm interface, then pull it out in the opposite direction. Before pulling it out, rotate the movable wiper blade strip slightly to avoid any obstruction during removal. Then, install the new wiper blade. The wiper blade is a strip structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its main function is to clear rain, snow, and dust from the windshield that obstruct the view. The Nissan Sylphy has a length, width, and height of 4631mm, 1760mm, and 1503mm respectively, with a wheelbase of 2700mm. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122 HP.
5
0
Share

Where is the production base of Haval cars?

Great Wall Haval's production base is located in Baoding City, Hebei Province. Relevant information about Great Wall Haval is as follows: 1. Haval: Haval is a sub-brand of Great Wall Motors, established on March 29, 2013. The Haval brand, mainly focusing on SUV models, operates in parallel with the Great Wall brand, using independent logos, and has independent product development, production, and service systems. 2. Haval car management: Whether it's personnel management, process management, or supply chain management, all are very stringent. The price range of Haval cars varies from tens of thousands to hundreds of thousands, meeting the needs of all customer groups. 3. Pros and cons: The advantages are strong and smooth power, energy-saving and environmental protection, quick low-temperature start, and low noise; the disadvantages are that the interior materials and workmanship are still subpar, and the off-road performance is limited.
11
2
Share

How to Turn Off a Tesla?

Tesla's shutdown method is: 1. Press the brake firmly to prevent the car from moving; 2. Shift the gear to P (Park), press the button on the door handle to open the door, and after exiting the vehicle, press the Tesla logo on the key once to cut off the power and shut down the car. Tesla is an American electric vehicle and energy company founded by Martin Eberhard and Marc Tarpenning in Silicon Valley, USA. It primarily manufactures and sells electric vehicles, solar panels, and energy storage equipment. Tesla's vehicle lineup includes the Model 3, Model Y, Model S, Model 3 (imported), and Model X. Taking the Model 3 as an example: its dimensions are 4694mm in length, 1850mm in width, and 1443mm in height, with a wheelbase of 2875mm. The body type is a 4-door, 5-seater sedan, equipped with a fixed gear ratio transmission.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.