What Causes the Abnormal Noise Inside the MG6?

2 Answers
DiJason
07/24/25 4:01am
Abnormal noise inside the MG6 may be caused by issues with the body, engine compartment, tires, transmission, or brakes. Abnormal Noise: This refers to unusual sounds emitted by the car due to assembly or other reasons. Most of these noises do not affect normal vehicle operation and often occur in winter due to thermal expansion and contraction. Solutions: Body Noise. Applying adhesive strips on doors and windows or placing rubber pads in friction-prone areas may help reduce or eliminate the noise. Engine Compartment Noise. If abnormal noises originate from the engine, they usually indicate major issues, and it is advisable to send the car for professional inspection and repair as soon as possible. Tire Noise. If you hear a "tapping" sound, it might be due to small stones stuck in the tire tread. If the tire produces a "whooshing" sound, you should pull over and change the tire. Transmission Noise. Therefore, it is essential to perform regular checks and change the oil frequently. Brake Noise. The difference between sand particles and low brake fluid can be determined by the duration of the noise.
Was this review help?
3
4
Share
Floyd
08/10/25 11:36pm
I've owned an MG6 for several years and have experienced various interior rattles firsthand. The most common issue is loose interior trim - like plastic clips on door panels or the dashboard that squeak when driving over bumps. Door seals that have aged or deformed produce rubbing sounds when closing, especially noticeable in winter due to plastic contraction. Seat tracks that aren't securely fixed make clicking noises during turns. Loose air vents or ductwork around the AC system create buzzing sounds when the AC is on - the MG6's design seems a bit rough in this aspect. Worn suspension components like shock absorbers transmitting vibrations can also cause thumping noises. Additional noise comes from detached trunk lids or roof trim strips. While these minor issues don't affect driving safety, they're quite annoying. I recommend first checking if clips are tight yourself, and if not, have a professional shop address them to prevent small problems from becoming persistent nuisances.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What are the gear positions of the XRV automatic transmission?

The XRV automatic transmission car is divided into P, R, N, S, L, D, and other letter gear positions. Different gear combinations output different power. The XRV automatic transmission model is equipped with a CVT gearbox. When the car is at different speeds, it needs to "shift gears," that is, select different gear combinations to output power. The following is a detailed introduction: P gear: Parking means "parking." It is the parking gear and is used when parking. When you arrive at your destination or need to park for a long time, shift the gear lever into this position. Note: The vehicle must be completely stopped before shifting into P gear. Shifting into P gear before the vehicle has completely stopped may cause damage to some mechanical parts of the automatic transmission. When P gear is engaged, the wheels are mechanically locked, preventing the vehicle from moving forward or backward. Therefore, when parking on a slope, you must shift into P gear. Additionally, during short stops (such as at a traffic light), it is best not to shift into P gear to avoid being rear-ended, which could severely damage the entire transmission. R gear: Reverse means "reverse." Whether manual or automatic, R is the reverse gear. Engaging R gear will make the car move backward. This gear can only be engaged when the vehicle is stationary and the engine is idling. Never use R gear when the car is moving forward, and pay special attention to the accelerator pedal control when reversing. N gear: Neutral means "neutral," also known as the neutral gear. At a traffic light, you can shift into this gear and step on the brake. If the waiting time is long, it is recommended to engage the handbrake directly, allowing your foot to leave the brake pedal for a short rest. Many people mistakenly believe that shifting into N gear while coasting downhill or at high speed can save fuel. In fact, this is a serious mistake—it not only fails to save fuel but can also damage the transmission. S gear: Sport means "sport" and refers to the sport mode in cars. When this gear is engaged, the transmission shift time is delayed to provide greater power, usually used when overtaking. L gear: Low means "low speed" and refers to the low-speed forward gear in cars. When this gear is engaged, the transmission only operates in low gear (equivalent to first gear in a manual transmission) and does not automatically switch to other gears based on speed changes. This gear is generally used when climbing or descending a slope. In low gear, the drive wheels output greater torque, providing sufficient power to climb steep slopes smoothly. Prolonged braking can cause the brake pads to overheat and reduce braking effectiveness, which is very dangerous on long or steep descents. In such cases, shifting into L gear allows the engine's low speed to restrain the vehicle's movement, eliminating the need for constant braking. D gear: Drive means "drive." Engaging this gear and stepping on the accelerator allows the vehicle to move. In this gear, the transmission automatically shifts based on speed and accelerator input. At a traffic light, you can stay in D gear and step on the brake. If the waiting time is short, this is fine, but if it is long, it can cause the transmission fluid temperature to rise and the fluid to degrade. The working principle of the CVT transmission is that traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft connects to the small pulley, which drives the large pulley via the steel belt. The CVT's transmission pulley has a unique structure, divided into movable left and right halves that can move closer or farther apart. The conical discs can tighten or loosen under hydraulic pressure, squeezing the steel belt to adjust the width of the V-shaped groove. When the conical discs move inward and tighten, the steel belt moves outward (centrifugally), and vice versa. This changes the diameter of the pulley driven by the steel belt, altering the transmission ratio. Since the CVT lacks the transmission gears of a traditional automatic transmission, it eliminates the gear-shifting process and the associated jerky sensation. As a result, the CVT's power output is linear, providing a very smooth driving experience. Theoretically, the CVT's transmission system can have an infinite number of gears, allowing for more flexible gear settings. It is easier to achieve the balance between gear ratio, speed ratio, performance, fuel consumption, and emissions compared to traditional transmission systems. The CVT's mechanical efficiency and fuel economy are significantly better than those of a conventional automatic transmission, second only to manual transmissions, offering much better fuel efficiency. However, its cost is slightly higher than that of a traditional automatic transmission, and improper operation can lead to a higher probability of issues. The CVT transmission itself has its drawbacks, such as the limited force the steel belt can withstand. However, with technological advancements, this issue is being addressed, and soon, high-displacement, high-torque models may be equipped with CVT transmissions.
14
1
Share

What is the tire model of the new Santana?

The new Santana has two tire models, which are 175/70R14 and 185/60R15. Tire specifications are usually represented by a set of numbers, with the first number indicating the tire section width and the latter indicating the rim diameter in inches. The length, width, and height of the new Santana are 4475 millimeters, 1706 millimeters, and 1469 millimeters respectively, with a wheelbase of 2603 millimeters. The new Santana is a compact sedan, and the entire lineup uses a 1.5-liter naturally aspirated engine with the code name EA211DLF. This engine has a maximum power of 82 kilowatts and a maximum torque of 145 Newton-meters.
18
4
Share

What is the recommended tire pressure for BMW 5 Series?

BMW 5 Series standard tire pressure ranges between 2.2 and 2.5. If the tire pressure is too low, the braking distance will correspondingly shorten. Additionally, low pressure will increase fuel consumption. During driving, insufficient tire pressure causes continuous compression and rebound of the fragile tire sidewalls, which can easily lead to tire fatigue and accelerated temperature rise. At certain temperatures, this may even cause a tire blowout. For BMW 5 Series, it is recommended to maintain equal tire pressure in all four tires. According to seasons, the recommended cold tire pressure is generally 2.3 in summer, 2.4 in spring and autumn, and 2.5 in winter. The domestic 5 Series is a premium sedan with body dimensions of 4998mm in length, 1901mm in width, and 1559mm in height.
8
1
Share

Where is the VIN located on a Dongfeng Nissan vehicle?

The VIN (Vehicle Identification Number) of a Dongfeng Nissan vehicle is located at the lower left corner of the driver's side windshield. It starts with English letters and consists of a 17-character alphanumeric code. Taking the Teana as an example: LGBF1AE0********* First 3 digits: LGB represents Dongfeng Nissan. 4th digit: F represents the Teana model. 5th digit: 1 represents a four-door sedan. 6th digit: A represents 2.0L; C represents 2.3L; D represents 2.5L; H represents 3.5L. 7th digit: Restraint system type, E represents multiple airbags. 8th digit: 0 represents automatic transmission. 9th digit: Check digit. 10th digit: Model year. 11th digit: Assembly plant code. Digits 12-17: Production sequence number.
19
1
Share

What is the battery model of the Changan CS75?

The battery model for the 2014 Changan CS75 2.0MT Leading SUV is AGMH5 and AGML2400, while the battery models for the Changan CS75 SUV are L2350R, 58, 86, L2400R, and D23R. Below is some relevant information about car batteries: 1. Function: It can convert chemical energy into electrical energy, serving as a DC power source. It provides a strong starting current to the starter when starting the engine and can assist the generator in supplying power to electrical equipment when the generator is overloaded. 2. Lifespan: The design lifespan of a battery is 27 months. 3. Types: Nickel-cadmium batteries, nickel-metal hydride batteries, lithium-ion batteries, lithium polymer batteries, lead-acid batteries, etc.
13
2
Share

How to Remove the Exterior Door Handle of the New Audi Q5L?

New Q5L exterior door handle removal: First, remove the door trim panel, then use a screwdriver to take out the screws securing the handle. Below is information about the Audi Q5L: 1. Dimensions: The 2018 Audi Q5L measures 4753mm in length, 1893mm in width, and 1659mm in height, with a wheelbase of 2908mm. 2. Drivetrain: The 2018 Audi Q5L features a front-engine, all-wheel-drive layout with a Torsen center differential. 3. Powertrain: The 2018 Audi Q5L is equipped with a 2.0T engine paired with a 7-speed dual-clutch transmission. It delivers a maximum output of 140 kW, a peak torque of 320 N·m, a top speed of 210 km/h, accelerates from 0-100 km/h in 8.6 seconds, and has a combined fuel consumption of 7.1L/100km as per the official test cycle.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.