What Causes the Abnormal Noise in the Brake Transmission of the Bestune T77?

1 Answers
Amy
07/28/25 10:46pm
Introduction to the causes of abnormal noise in the brake transmission of the Bestune T77: Excessive wear of brake discs and brake pads: Both brake discs and brake pads are high-wear components. Each time the brakes are applied, these two parts experience friction, which naturally leads to wear over time. When the wear becomes excessive, abnormal noise can occur. Therefore, regular inspection and replacement are necessary. Typically, brake pads should be replaced every 60,000-80,000 kilometers, while brake discs should be replaced every 100,000-120,000 kilometers. Improper installation of brake pads: If the brake pads are installed incorrectly or the model does not match, abnormal noise can also occur. In such cases, the brake pads should be reinstalled. When installing brake pads, it is essential to visit a professional auto repair shop, especially for owners who have had their brake pads replaced at roadside stalls, as extra caution is advised. Other possible causes: Generally, faults in the caliper, brake disc, or brake pads can all produce this noise. If the noise persists, the first step is to check for dragging brakes. Poor caliper resetting can cause prolonged friction between the disc and the pad, leading to abnormal noise under certain conditions. Additionally, the presence of foreign objects on the brake pads or brake discs can also cause abnormal noise.
Was this review help?
3
3
Share
More Forum Discussions

Is the Mercedes-Benz C260L an automatic transmission?

The Mercedes-Benz C260L is an automatic transmission. Gear shift position: A lever switch located behind the right side of the steering wheel can be used to shift gears. With the brake pedal depressed, pushing up and down sequentially selects R, N, and D gears. Pressing the button on the edge inward engages P gear. The auto-hold switch is located in the button area around the gear lever and uses mechanical buttons. To turn it off, simply press the corresponding button. Electronic gear shift method: Pulling upward sequentially selects N gear and R gear, while pulling downward selects D gear. Pressing the P button engages the parking gear. The electronic gear shift can only be operated when the key is turned to position 2 or the vehicle is started. This feature is available in models such as the S-Class, ML, GL, and the new E-Class.
1
1
Share

Is the Mercedes-Benz G500 the Big G?

Mercedes-Benz G500 is the Big G. What the Big G includes: The Mercedes-Benz "Big G" refers to the entire lineup of the Mercedes-Benz G-Class, which includes five models: the Mercedes-Benz G500, G550, G63, G65, and G350. Therefore, all these models can be referred to as the "Big G". Mercedes-Benz G500 exterior dimensions: It measures 4817mm in length, 1931mm in width, and 1969mm in height. Its massive body size gives it a more imposing presence. The use of a body-on-frame design and adjustable damping components visually highlights the vehicle's robust off-road capabilities. Additionally, the chassis protection further enhances its off-road performance.
8
0
Share

Where is the BCM control module located in the Skoda Superb?

Skoda Superb BCM control module is located next to the console power supply. BCM control module: BCM (Body-Control-Module) is a body control module that can control various automotive body electrical appliances, such as vehicle lighting, wipers, washing systems, door locks, power windows, sunroofs, power mirrors, remote controls, etc. The system also features power management functions, high and low voltage protection, delayed power-off, system sleep mode, and more. It is an indispensable and important component in automotive design. Functions of BCM: The BCM uses a microprocessor to comprehensively analyze the status of various switches and related environmental factors, enabling intelligent control of body electrical appliances. Additionally, the BCM offers new functions such as onboard electrical fault diagnosis, fault protection, power management, and bus communication, significantly enhancing the comfort and safety of the vehicle.
4
5
Share

Can an Audi be locked without turning off the engine?

Audi cannot be locked without turning off the engine. For safety reasons: After parking, if the vehicle remains stationary for a long time, the accumulation of exhaust emissions may enter the cabin through the air intake (since the vehicle is not completely sealed, even with the internal circulation mode on, this is unavoidable). If someone is locked inside the car, the consequences could be unimaginable. Methods to prevent forgetting to turn off the engine when exiting the vehicle: Check the tachometer and display screen. Before exiting, ensure the display screen is turned off and dark; the steering wheel rises. When setting the steering wheel position, avoid setting it too high, so that when parking and turning off the engine, the steering wheel will rise.
14
3
Share

What does the Audi engine model DLH mean?

Audi engine model DLH refers to the engine model, where 'l' represents the number of cylinders, and the A4 allroad uses the DLH engine. Engine Introduction: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, and more. Basics of Internal Combustion Engines: The engine block serves as the framework of the engine, providing the installation base for various mechanisms and systems. It houses all major engine components and attachments, both internally and externally, and withstands various loads. Therefore, the engine block must possess sufficient strength and rigidity. The engine block assembly mainly consists of components such as the cylinder block, cylinder liner, cylinder head, and cylinder gasket.
11
0
Share

What is the fuel tank capacity of the Nissan Teana Duke in liters?

2021 Nissan Teana Duke has a total of 6 models, all with a fuel tank capacity of 61.3L. In terms of driving method, all models are front-wheel drive. Among vehicles in the same class, the 2022 Accord has a fuel tank capacity of 56 liters, and the 2021 Camry has a fuel tank capacity of 60 liters. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel level is sufficient. Methods to open the fuel tank: Mechanical key opening: This is usually seen in some hardcore off-road vehicles. Nowadays, general family cars do not use mechanical keys to open the fuel tank because it is relatively complicated to use. In-car switch method: The fuel tank switch inside the car varies in position depending on the model. Some are located on the floor to the left of the driver's seat, some are on the left front door panel or the center console, all marked with a fuel pump icon. However, it should be noted that the in-car switch can easily lead to the owner forgetting to turn off the engine before refueling, so the owner should remember to turn off the engine before refueling. Press-type opening method: The press-type fuel tank door opening is currently the most convenient method. The owner only needs to park the car, and the fuel attendant can press to open the fuel tank directly for refueling. However, when the car is not parked for refueling, the owner should remember to lock the central control, otherwise the fuel tank cap can be opened.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.