···
Log in / Register

What Causes the Abnormal Noise in Geely Boyue's Engine?

4 Answers
McNadia
09/03/25 2:12am

Reasons for abnormal noise in Corolla's engine: Insufficient engine oil: Leads to inadequate lubrication of components, resulting in wear noise. Adding engine oil can resolve the issue. Poor fuel combustion: Low injection pressure, fuel injector dripping, poor fuel atomization, and delayed fuel supply can all cause poor fuel combustion, leading to knocking. The fuel injector should be removed for inspection and adjustment, and the fuel supply timing should be adjusted. Replace parts if necessary to meet specifications. Premature fuel supply: Fuel injection starts before the piston reaches the designated position, causing early fuel combustion. High-pressure gas in the cylinder impacts the piston, producing rhythmic knocking sounds. Reducing the throttle makes the knocking obvious. Adjusting the fuel supply advance angle can resolve the issue.

Was this review help?
18
1
Share
ValentinaDella
09/15/25 4:00am

As a seasoned driver with years of experience, I have some insights into engine noise issues. If the Geely Boyue's engine produces abnormal sounds, it's likely due to mechanical part wear or looseness. For example, aging belts can cause squeaking noises, which can be quite unsettling. Worn bearings may produce rattling sounds, or insufficient lubrication can lead to metal friction noises. Excessive carbon buildup is also a major issue, causing knocking sounds that resemble engine pounding. Ignition system failures can make the engine run unevenly, resulting in harsh noises. When encountering such sounds, don't delay—immediately stopping to inspect can prevent worse problems like engine burnout. It's safer to have it diagnosed with professional equipment at a reputable repair shop. During regular maintenance, don't forget to change the oil and clean carbon deposits, as this can significantly reduce the chances of abnormal noises.

Was this review help?
16
2
Share
Expand All
BennettLynn
10/29/25 4:37am

I just encountered an abnormal noise from my car's engine, which gave me quite a scare, similar to the situation with the Geely Boyue. There could be various reasons: a loose belt may produce a continuous screeching sound; if it's bearing wear, there might be a friction noise beneath the engine; excessive carbon buildup can cause knocking sounds like a small hammer tapping; and problems with the oil pump or lubrication system can result in rough noises. All these issues can affect engine performance and even increase fuel consumption. It's recommended to first listen to identify the source of the noise and perform a simple check on the belt and oil level. However, avoid attempting repairs yourself—take it to a shop where a technician can use diagnostic tools to accurately locate the issue. For safety, if the noise is loud, avoid driving the car to prevent breakdowns or accidents on the road. Routine maintenance before each season change can help prevent such issues.

Was this review help?
2
3
Share
Expand All
ElainaLee
12/12/25 4:49am

I've driven similar models before, and engine abnormal noises usually stem from a few common issues. Loose belts or chain links produce a sharp screeching sound; worn bearings or gears create a continuous rumbling noise; carbon buildup causes knocking sounds resembling metal collisions; faulty ignition coils result in irregular noises. These may seem minor but pose significant risks, potentially accelerating engine aging or even causing damage. Don't ignore abnormal sound signals—prompt inspection and repair ensure safety. Regular oil changes and cleaning the intake system can reduce risks. Safety always comes first.

Was this review help?
11
2
Share
Expand All
More Forum Discussions

Why does a vehicle suddenly stall?

There are several reasons why a vehicle may suddenly stall: 1. Insufficient driving skills: The driver's lack of proficiency or improper operation can cause the vehicle to stall; 2. Fuel pump failure: A stuck or malfunctioning fuel pump can suddenly stop supplying fuel, leading to the vehicle stalling; 3. Use of substandard fuel: For automatic transmission vehicles, stalling is often caused by the use of fuel that does not meet standards, resulting in engine carbon buildup and stalling; 4. Multiple cylinder failure: Due to spark plug or ignition coil failure, one or more cylinders may fail to ignite, causing the vehicle to suddenly stall.
15
3
Share

What brand is the Kaiyi X3?

Kaiyi X3 is a brand under Kaiyi. The Kaiyi X3 is a gasoline-powered compact SUV, targeting the young SUV market. Its body dimensions are 4335mm in length, 1796mm in width, and 1665mm in height, with a wheelbase of 2530mm. The Kaiyi X3 is equipped with the ACTECO series 1.6L DVVT engine, paired with either a 5MT or CVT transmission. The exterior design of the Kaiyi X3 follows the design concept of the Kaiyi concept car iCX, 'Wings of Triumph,' with inspiration drawn from the eagle, symbolizing freedom, strength, sharpness, and victory, showcasing more of a sporty, energetic, and youthful vibe.
20
2
Share

Can You Add Water When Coolant Is Low?

You should not add water when the coolant is low. One of the functions of automotive antifreeze is to prevent scale buildup. If the owner adds well water or other hard water to the antifreeze, it is more likely to cause scale formation in the car's engine, which can clog pipes and affect the normal operation and lifespan of the engine. The water in antifreeze is soft water and must be mixed according to specific standards; it is not recommended to add water to automotive antifreeze on your own. The role of coolant is to circulate in the engine cooling system, carrying away excess heat generated during engine operation, allowing the engine to operate at the correct working temperature. When the coolant level is insufficient, the engine's water temperature will rise too high, leading to damage to engine components and causing severe harm to the vehicle. Once the owner notices insufficient coolant, it should be replenished promptly.
15
4
Share

What is the difference between Volkswagen 230 and 280?

The differences between Volkswagen 230 and Volkswagen 280 are: 1. Different power tuning: Volkswagen 230 has 131 horsepower; Volkswagen 280 has 150 horsepower; 2. Different 0-100 km/h acceleration times: Volkswagen 230 takes 8.9 seconds; Volkswagen 280 takes 8.5 seconds. Additional information: The Volkswagen 230 is a compact SUV with body dimensions of 4605mm in length, 1765mm in width, and 1460mm in height. In terms of appearance, the Volkswagen 230 features two chrome strips on the upper grille, which are connected to the chrome headlight brows, and the front bumper is paired with the lower grille, extending horizontally towards both sides.
6
0
Share

What do National V and National VI mean?

National V is China 5, and National VI is China 6. National V stands for the National Fifth Stage Emission Standard for Motor Vehicle Pollutants, while National VI stands for the National Sixth Stage Emission Standard for Motor Vehicle Pollutants. Both refer to the emission standards for vehicle exhaust. The emission control level of National V is equivalent to the European Stage 5 emission standard, imposing stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter emitted by motor vehicles. From National I to National IV, each upgrade in the standard reduces vehicle pollution by 30% to 50%. The National VI emission standard improves upon National V by 40% to 50%, reaching a level comparable to that of the United States, making it one of the strictest emission standards globally. The National VI emission standard is implemented in two phases: National VIa and National VIb, with National VIb being even stricter than National VIa.
17
0
Share

What grade of engine oil does the Camry use?

The Camry uses SM10W30 grade engine oil. This grade of oil is pre-filled with high-quality multi-viscosity oil at the factory. Except for extremely cold climates, this oil can be used year-round and belongs to the low-viscosity grade. The Camry's body dimensions are 4900mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. The Camry's 2.0L naturally aspirated engine delivers 178 horsepower and a maximum torque of 210 Nm, with a maximum power speed of 6600 rpm and a maximum torque speed ranging from 4400 to 5200 rpm. The Camry is equipped with three major powertrains: TNGA 2.5L HEV, TNGA 2.5L, and TNGA 2.0L, offering a total of ten models across three series: Luxury, Sport, and Hybrid.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.