···
Log in / Register

What Causes the Abnormal Noise in Audi Q5L?

4 Answers
DeLucas
07/29/25 11:23pm

Audi Q5L abnormal noise is related to engine speed. The relationship between abnormal noise and engine speed: The abnormal noise only exists at idle or low-speed operation, the sound becomes chaotic when maintaining a certain speed, short sounds are emitted successively during rapid deceleration, the abnormal noise appears when the engine accelerates rapidly, and the sound still exists when maintaining high-speed operation. Causes of the noise: Excessive clearance between the piston and cylinder wall; Over-tight assembly of the piston pin or connecting rod bearing; Excessive clearance between the tappet and its guide hole; Wear of the cam profile. The relationship between abnormal noise and load: When a cylinder is cut off, the abnormal noise suddenly disappears or reduces. Causes of the noise: Piston knocking; Loose connecting rod bearing; Piston ring leakage; Broken piston pin.

Was this review help?
14
0
Share
GraceAnn
08/16/25 1:57am

When driving my Audi Q5L, I noticed that the abnormal noise is likely due to wear and tear of the suspension system's rubber bushings, especially noticeable on bumpy roads. If the brake pads are rusted or have foreign objects stuck in them, they can also produce squeaking sounds, particularly during low-speed turns. Loose interior components, such as the dashboard or trunk cover panels, can rattle due to vibrations while driving. In the engine compartment, aging belts or noises from the cooling system are also possible causes. I recommend listening carefully to the noise location when parked to make a preliminary judgment—for example, noise from the front wheels may indicate suspension issues, while noise from the trunk could be due to problems with the support struts. Don’t overlook these details; take the car to a professional repair shop as soon as possible, as delays could lead to more severe component damage. During regular maintenance, pay attention to these wear-prone parts—early intervention saves money and provides peace of mind.

Was this review help?
5
1
Share
Expand All
OwenAnn
10/18/25 8:29am

The Audi Q5L often develops squeaks and rattles after prolonged use, which has happened multiple times on my car. There are various causes, with wear and tear on suspension components like shock absorbers or bushings being the primary culprit, especially in winter when rubber materials harden and become more prone to noise. Brake system noises are also common, particularly after replacing brake discs, as they require a break-in period. For interior issues, aging door seals or loose sunroof tracks often cause creaking sounds. Engine-related problems, such as belt tension issues, can also lead to squeaking. I've found it helpful to note when the noises occur—whether during cold starts or high-speed driving—as this makes it easier to identify the root cause. Don't ignore these minor issues; insist on professional diagnosis at an authorized 4S shop to prevent potential safety hazards from escalating.

Was this review help?
13
4
Share
Expand All
Robyn
12/02/25 2:17am

There are many reasons for the Audi Q5L's abnormal noises, with suspension issues being the most common, such as squeaking caused by loose bushings or shock absorbers. The braking system can also produce noise due to rust or dust accumulation. It's not uncommon for interior components like seats or trunk lids to rattle while driving. Abnormal noises in the engine area may come from the belt rubbing back and forth. It's recommended to pay attention to the location of the noise: if it's noticeable on bumpy roads, focus on checking the suspension; if it occurs during quiet moments, inspect the interior. Record the sound for the technician's reference and address it promptly to ensure safe driving without taking risks.

Was this review help?
9
5
Share
Expand All
More Forum Discussions

How to Read a Spark Plug Heat Range Chart?

Spark plug heat range charts typically include numbers from 1 to 9, where 1-3 represent low heat range, 4-6 medium heat range, and 7-9 high heat range. Original equipment manufacturer (OEM) spark plugs usually come in heat ranges of 5, 6, and 7. The lower the number, the 'colder' the spark plug, meaning better heat dissipation. Below is an introduction to spark plugs: 1. Function of spark plugs: Spark plugs serve to conduct the high-voltage electrical pulse from the ignition coil into the combustion chamber, using the electrode's spark to ignite the air-fuel mixture, thus completing combustion. 2. Types of spark plugs: Common spark plugs are categorized into resistor spark plugs, platinum spark plugs, and iridium spark plugs. Generally, resistor spark plugs have a lifespan of 20,000 kilometers, platinum spark plugs last up to 40,000 kilometers, while iridium spark plugs can endure between 60,000 to 80,000 kilometers.
18
2
Share

How many kilometers can you drive without repairing an engine that burns oil?

If the engine burns oil and is not repaired, the car can generally continue to drive as long as there is sufficient engine oil. Hazards of engine oil burning: If a car burns oil but is not repaired, it can cause the oxygen sensor to fail prematurely, leading to increased carbon deposits in the combustion chamber, unstable idling, poor acceleration, increased fuel consumption, excessive exhaust emissions, and other adverse effects. It can also cause blockage of the three-way catalytic converter, and in severe cases, the engine may be scrapped. Hazards of continuously adding oil without changing it when burning oil: Continuously adding oil without changing it when the engine burns oil is also not advisable. Burning oil increases carbon deposits, and the oil contains impurities, making it more prone to deterioration. If the oil burning is severe, the oil should be replaced immediately. During replacement, it is also necessary to clean the engine and remove carbon deposits.
12
1
Share

How many points will be deducted for not using lights properly in case of a road breakdown?

In case of a road breakdown, not using lights properly will result in a deduction of 3 points and a fine. According to Article 90 of the Road Traffic Safety Law, motor vehicle drivers who violate road traffic safety laws and regulations regarding road passage shall be given a warning or fined. If there are other provisions in this law, penalties shall be imposed in accordance with those provisions. According to legal provisions, if a motor vehicle breaks down or is involved in a traffic accident on the road, obstructing traffic and making it difficult to move, the driver must turn on the hazard warning flashers and place a warning sign 50 to 100 meters behind the vehicle. At night, the clearance lights and rear position lights should also be turned on simultaneously. For motor vehicles overtaking without using lights properly, a fine and 1 point deduction will be imposed; for motor vehicles meeting at night without using lights properly, a fine and 1 point deduction will be imposed; for motor vehicles passing through signal-controlled intersections without using lights properly, a fine and 1 point deduction will be imposed; for motor vehicles changing lanes without using lights properly, a fine and 1 point deduction will be imposed.
20
0
Share

Can a driver's license be purchased directly?

A driver's license cannot be purchased directly. According to Article 280, Paragraph 3 of the Criminal Law of the People's Republic of China: "Forging, altering, buying, or selling resident identity cards, passports, social security cards, driver's licenses, or other documents that can be used to prove identity as prescribed by law shall be punishable by imprisonment of not more than three years, criminal detention, public surveillance, or deprivation of political rights, and a fine; if the circumstances are serious, the punishment shall be imprisonment of not less than three years but not more than seven years, and a fine." Below is an introduction to the C1 driver's license: 1. The C1 driver's license is a commonly used license: The C1 driver's license is the most commonly used and most common driver's license in China. 2. Vehicles that cannot be driven with a C1 license: A C1 driver's license does not permit the operation of city buses, medium or large passenger vehicles, large trucks, or two-wheeled or three-wheeled motorcycles. 3. Vehicles that can be driven with a C1 license: A C1 license allows the holder to drive C2, C3, and C4 model vehicles.
13
4
Share

Will the engine number change after replacing the engine?

After replacing the engine, the engine number will change. You need to bring the certificate of conformity of the new engine to the vehicle management office for registration. Introduction to engine numbers: The engine number is the engine model. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, industry or enterprise practices, and the attributes of the engine, to identify a batch of identical products. It represents information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and brake power. The engine number consists of four parts, each with the following meanings: Front section: Includes the product series code, generation symbol, and local or enterprise code. Manufacturers can choose corresponding letters as needed, but they must be approved and registered by the industry standard regulatory body. Middle section: Composed of symbols representing the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear section: Composed of symbols representing structural features and usage characteristics. Tail section: Distinguishing symbol.
18
5
Share

Do China V diesel vehicles have three-way catalytic converters?

China V diesel vehicles are equipped with three-way catalytic converters. Not all vehicles have three-way catalytic converters; in earlier years, vehicles produced in China that did not meet the China II emission standards were not equipped with them. Composition of the three-way catalytic converter: A three-way catalytic converter generally consists of four parts: the shell, damping layer, substrate, and catalyst coating. Shell: Made of stainless steel to prevent oxide scale from falling off, which could clog the substrate. Damping layer: Composed of gaskets or wire mesh pads, it serves to seal, insulate, and secure the substrate. To protect the substrate from damage caused by vibration, thermal deformation, and other factors, the gasket is made of expanded mica and aluminum silicate fibers, bonded together with adhesive. Substrate: Made of honeycomb-shaped ceramic material, though many also use metal (including stainless steel) materials. Catalyst: Composed of precious metals such as platinum, rhodium, and palladium, sprayed onto the substrate to form the purifying agent. Lifespan of the three-way catalytic converter: The lifespan of a three-way catalytic converter is generally between 80,000 to 100,000 kilometers. The specific lifespan depends on the vehicle's usage conditions, and it is also related to the quality of the fuel used and the driving environment.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.