What Causes the Abnormal Noise from the Left Rear Wheel of a Car?

2 Answers
SanAdelyn
07/24/25 1:47am
Here are the specific reasons for the abnormal noise from the left rear wheel of a car: 1. Accumulation of foreign objects: Excessive accumulation of debris on the fender or sound insulation pad. When the car turns, the tire interferes with the debris, causing abnormal noise. After cleaning the fender, the tire noise disappears. 2. Loose screws: The fastening screws of the fender or sound insulation pad have come loose, causing the fender or sound insulation pad to lift. When the front wheel turns, it interferes with the lifted part, resulting in friction and abnormal noise. It is necessary to inspect the fastening condition of the fender and sound insulation pad and eliminate factors such as looseness and lifting. 3. Unauthorized modifications: Unauthorized modifications to the car tires, such as replacing them with non-original size tires. For example, widening the tires or increasing their diameter may cause interference between the tire and the car body when turning, resulting in noise. This poses a significant safety hazard, and the original size tires should be reinstalled.
Was this review help?
14
2
Share
ORylee
08/10/25 9:25pm
Having worked with cars for many years, I've found that noises from the left rear wheel are mostly caused by a few common issues. Starting with the tire: incorrect tire pressure or uneven wear can cause squeaking sounds and make driving unbalanced; small stones or nails stuck in the tread can also create a tapping noise as hard objects get lodged in the grooves. Bearing problems are quite common too—worn or damaged bearings produce a humming sound when rotating, similar to a tractor noise; if the bearing is severely damaged, the wheel becomes unstable, and in extreme cases, it may even detach, which is dangerous. Issues with the braking system can also be the culprit, such as worn brake pads or foreign objects stuck on the disc, causing a sharp squeal when braking. Suspension components like worn-out shock absorbers or loose bolts can make a thumping noise when going over bumps. If you hear any unusual sounds, it's best to pull over safely first—check the tire for foreign objects, feel if the wheel is overheating, and if unsure, take it to a professional shop for inspection. Don’t delay, as small issues can turn into major problems and compromise driving safety.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What Causes the Abnormal Noise When Starting in First Gear?

Abnormal noise when starting in first gear is usually caused by tooth surface detachment, broken or fallen gear teeth, or misaligned gear installation. In such cases, it is essential to inspect promptly and replace parts if necessary. While driving, the transmission may also produce a dull, irregular noise. The reasons for abnormal brake noise without pressing the brake pedal are as follows: 1. Use of low-quality or overly hard brake pads: If inferior or excessively hard brake pads are used, they may produce a squeaking noise when rubbing against the brake disc during braking. Therefore, always use high-quality brake pads when replacing them. 2. Presence of sand or foreign objects between the brake pad and brake disc: During normal driving, it is inevitable to encounter complex road conditions. Due to the unique design of disc brakes, sand or foreign objects may get lodged between the brake pad and brake disc, leading to abnormal noise during braking.
15
1
Share

How Heavy is a Spare Tire?

Generally speaking, the tires of family cars range between 15-18 inches in size and weigh around 8-12 kilograms. Including the wheel hub, the total weight is approximately 15-25 kilograms. This means that a full-size spare tire would not exceed 50 pounds in weight. If it's a non-full-size tire, the weight might not exceed 30 pounds. Here are some precautions to consider when purchasing and using tires: 1. Always check the production date when buying tires: Avoid purchasing tires with production dates that are too old. Tires are rubber products and will age even if unused. 2. Regularly inspect tire pressure and the surface for any damage during daily use: The sidewalls of tires are relatively fragile, and if they are scratched or punctured, they cannot be repaired. It is recommended that car owners replace their tires every four years, even if the mileage driven within those four years is minimal.
16
5
Share

What to Do If the Vehicle License Annual Inspection Expires?

Vehicle owners with expired licenses should drive their vehicles as soon as possible and bring the original vehicle license and the original compulsory traffic accident liability insurance certificate valid for more than 15 days to the local vehicle management office where the vehicle is registered to complete the annual inspection. Relevant information is as follows: 1. Annual Inspection: The vehicle license does not have a fixed expiration date because the expiration date on the license changes after each annual inspection. Therefore, an expired vehicle license actually means the vehicle's annual inspection has expired. 2. Consequences of an Expired Vehicle Annual Inspection: Vehicles that have not undergone the annual inspection on time are not allowed on the road. Driving a vehicle without timely annual inspection will result in a 3-point penalty and a fine of 200 yuan. If an accident occurs involving a vehicle that has not undergone the annual inspection, the party involved will bear full or primary responsibility, and the insurance company will not compensate.
15
0
Share

Can You Shift Directly from First Gear to Second Gear?

You can shift directly from first gear to second gear. Here is some extended information about gear usage: 1. First gear: Used for normal starts or when climbing very steep slopes. The speed in this gear is generally around 10 km/h. 2. Second gear: Used as a transitional gear for acceleration after starting, or for low-speed driving or climbing steep slopes. The speed in this gear is usually around 20 km/h. During the driving test (Subject 3), the speed should not exceed 30 km/h. 3. Third gear: Typically used at speeds between 20 km/h and 40 km/h, often employed for city driving. 4. Fourth gear: Can be used at speeds between 40 km/h and 60 km/h. 5. Fifth gear: Used at speeds above 60 km/h, typically for high-speed driving.
3
4
Share

How can I drive on the highway with less than one year of driving license?

C1 license holders with less than one year of experience can drive on the highway, but they cannot drive alone and must be accompanied by an experienced driver. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," drivers in the probationary period must be accompanied by a driver who has held a corresponding or higher-level driving license for more than three years when driving on the highway. Relevant information about the driving license is as follows: 1. Introduction: The People's Republic of China Motor Vehicle Driving License, referred to as the driving license or "driver's license," is a mandatory document for motor vehicle drivers issued in accordance with the laws of the People's Republic of China. 2. Examination content: The test subjects include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
1
1
Share

How to Install the Timing Belt on a Peugeot 1.2T Engine?

Installation method for the Peugeot 1.2T timing belt: 1. Align the timing mark on the camshaft timing gear with the mark on the valve cover. 2. Align the timing mark on the crankshaft timing gear with the mark on the front cover. 3. Install all components of the timing belt in sequence. 4. Loosen the pulley mounting bolts by 1/4-1/2 turns, compress the automatic tensioner pushrod to the lowest position, insert a steel pin into the hole, adjust the pulley with a snap ring pliers, rotate counterclockwise until the pulley adjustment hole is parallel to the ground, tighten the fixing bolts, and remove the steel pin. 5. Rotate the crankshaft clockwise for 2 turns and check if the timing marks are correctly aligned. 6. Reinstall the engine timing belt cover. 7. Reinstall the generator and air conditioning compressor belt.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.