What Causes the Abnormal Noise from the Left Front Wheel of a Sedan While Driving?

2 Answers
DelChristopher
07/25/25 9:27am
The abnormal noise from the left front wheel of a sedan while driving can be categorized into two scenarios: low-speed noise and high-speed noise. The former is typically due to inaccurate four-wheel alignment, while the latter is caused by a damaged wheel bearing. Below are the specific reasons: Inaccurate Four-Wheel Alignment: At low speeds, a rhythmic humming noise is heard, which diminishes at high speeds. Fault Cause: Inaccurate four-wheel alignment leads to uneven tire wear over long-distance driving, resulting in abnormal noise. Solution: Feel the tire treads with your hand. If you notice unevenness on the inner or outer treads, this is likely the cause of the noise. It is essential to perform a four-wheel alignment first, followed by replacing the tires. Damaged Wheel Bearing: At low speeds, the noise is not noticeable, but at high speeds, a consistent humming sound is heard. Fault Cause: This phenomenon occurs when one of the vehicle's wheel bearings is damaged. Long-distance driving places high demands on wheel bearings, and bearings of poor quality or those that have been in use for a long time may fail due to fatigue, causing abnormal noise. Solution: Visit a service station to diagnose the source of the noise, identify the problematic wheel, and proceed with replacement.
Was this review help?
14
3
Share
VanZoe
08/11/25 7:19pm
I noticed a strange noise coming from the front left wheel while driving the sedan. Having driven many cars, this is quite a common issue, possibly related to the braking system. For instance, severely worn brake pads or a loose caliper can easily produce a screeching sound when driving. The suspension system is also worth checking—damaged shock absorbers or bent control arms can cause the tire to wobble and create noise. Last year, I had a shock absorber problem myself, and the creaking sound was quite annoying. Additionally, don’t overlook tire issues. Check if the tire pressure is low or if there are small stones stuck in the tread. Neglecting these can lead to uneven tire wear and compromise safety. Remember to visit a reputable repair shop as soon as possible—don’t wait until an accident happens to regret it. There are various causes for strange noises, so start with the simpler checks first.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

How much oil should be added to the N20 engine?

If it is the older N46 naturally aspirated engine, add 4.25 liters. For the newer N20 turbocharged engine, add 5 liters of oil. If you are unsure about the exact amount of oil to add, refer to the oil dipstick scale marks, ensuring the level is between the middle and the upper line. Relevant information about engine oil is as follows: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. It is often referred to as the 'blood' of a car. 2. Composition: Engine oil consists of base oil and additives. The base oil is the primary component of lubricating oil, determining its basic properties. Additives are used to compensate for and improve the shortcomings of the base oil, providing certain new characteristics, making them an essential part of lubricating oil.
18
5
Share

What procedures are required to drive to Beijing?

Driving to Beijing requires obtaining a Beijing Entry Permit. Below are the specific details about the Beijing Entry Permit: 1. Validity of the Beijing Entry Permit: Vehicles from outside Beijing entering within the Sixth Ring Road of Beijing (excluding the main road of the Sixth Ring Road) need to obtain this permit, which is valid for 7 days, and 3 days during special periods (such as during the Olympics or National Day). Failure to comply will result in a 3-point deduction and a fine. There are agencies for obtaining the Beijing Entry Permit on various highways and national roads leading into Beijing. 2. Required documents for application: To apply for the Beijing Entry Permit, you need to provide the vehicle's registration certificate within the inspection period, a green environmental protection compliance label or a vehicle exhaust inspection compliance certificate issued by the local municipal environmental protection department, the compulsory traffic insurance label, the inspection compliance label, as well as the driver's license, ID card (or household registration book), and other valid documents.
20
2
Share

What does n/min mean on a car?

n/min represents rotational speed, which stands for revolutions per minute; it is denoted by the symbol "n". Its international standard unit is r/S (revolutions per second) or r/min (revolutions per minute), and it can also be expressed as RPM (revolutions per minute, mainly used in Japan and Europe, while China adopts the international standard). When the unit is r/S, its value is equal to frequency, i.e., n=f=1/T, where T is the period of circular motion. Relevant information about the transmission is as follows: 1. Introduction: A device that changes the speed ratio and direction of motion. It is used to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. 2. Function: While driving, to adapt to different working conditions, the car's driving force and speed need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the transmission is installed.
7
4
Share

What does crv240 mean?

crv240 indicates that the vehicle is equipped with a 1.5-liter four-cylinder, 193 horsepower turbocharged engine. The engine has a maximum power of 142 kW and a maximum torque of 243 N·m. It uses 92-octane gasoline and adopts direct fuel injection. Both the cylinder head and cylinder block are made of aluminum alloy. Relevant information about the turbocharger is as follows: 1. Introduction: A turbocharger is essentially an air compressor that increases intake air volume by compressing air. 2. Working Principle: It utilizes the inertial force of exhaust gases from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller compresses the air delivered through the air filter pipe, pressurizing it before it enters the cylinder. When the engine speed increases, the exhaust gas discharge speed and turbine speed also increase simultaneously, allowing the impeller to compress more air into the cylinder. The increased air pressure and density enable the combustion of more fuel, and by adjusting the fuel quantity and engine speed accordingly, the engine's output power can be increased.
6
5
Share

Where is the ETC installation location?

The ETC installation location is on the upper middle part of the front windshield horizontally, while for large vehicles such as trucks and buses, the installation position is on the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters in height, with an installation angle between 30 to 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof films, it may affect the signal transmission of the microwave communication link, and thus should be installed in the microwave skylight zone. Precautions for using ETC include: 1. The ETC transaction sensing range is 8 meters. To prevent issues with the ETC device of the vehicle in front, maintain a distance of more than 10 meters to avoid automatic payment for the preceding vehicle; 2. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle device information, leading to payment failure; 3. When using a debit card to bind with ETC, insufficient balance may also cause payment failure.
19
0
Share

What is the Tayron X 330?

It is an SUV under the Volkswagen brand, positioned as a C-Segment Coupe SUV. It is based on the Volkswagen SUV-Coupe concept car, largely retaining the concept car's design in appearance, and is a product jointly developed by Volkswagen and FAW Group. Here are the relevant details: 1. Exterior: The Tayron X largely inherits Volkswagen's latest family design language. The headlight cluster features a more square design, equipped with two projector lenses and LED lighting. The radiator grille has a simpler design, adopting a hexagonal shape that integrates seamlessly with the headlight cluster. The front bumper includes independent LED daytime running lights and LED front fog lights on both sides. The side profile features a dual-tone body design. 2. Interior: It follows Volkswagen's signature minimalist interior design language, equipped with a 12.3-inch touchscreen infotainment system and a fully digital instrument panel. In terms of powertrain, it offers a 1.4-liter four-cylinder TSI turbocharged engine and a 2.0-liter four-cylinder TSI turbocharged engine, paired with Volkswagen's proprietary DSG dual-clutch transmission and the 4Motion all-wheel-drive system.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.