What Causes the Abnormal Noise from the Chassis After the Car Stops?

1 Answers
DiCody
07/30/25 12:40am
The reasons for abnormal noise from the chassis after the car stops are: 1. Corrosion or aging of the stabilizer bar bushings; 2. Damaged brake pads; 3. Malfunction in the connecting parts between the suspension and shock absorber; 4. Abnormal noise from the wheel bearings; 5. Deformation of the shock absorber spring; 6. Aging or wear of the shock absorber pressure bearings. Daily maintenance methods for the car chassis include: 1. Proper adjustment of the front wheel toe-in; 2. Good lubrication and proper adjustment of the wheel hub bearings; 3. Pay attention to changes in the front and rear axles and the frame; 4. Check for any damage to the leaf springs; 5. Proper adjustment of the brake clearance; 6. Monitor the working condition of the clutch.
Was this review help?
18
2
Share
More Forum Discussions

How to Replace the Cabin Air Filter in a Buick Excelle?

Method for replacing the cabin air filter in a Buick Excelle: 1. Open the glove compartment on the passenger side and locate the black clips, then pry them open with moderate force; 2. Remove the gray clips (one on each side), which requires a bit more force to detach, and push the glove compartment inward firmly; 3. Once the clips on the glove compartment are removed, you can pull the glove compartment outward; 4. After removing the glove compartment, you will see the cabin air filter housed in the black slot; 5. Pull out the old cabin air filter and replace it with a new one. The Buick Excelle is a model under SAIC-GM Buick, with body dimensions of 4419mm in length, 1814mm in width, and 1487mm in height, and a wheelbase of 2685mm. In terms of exterior design, the Excelle features the brand's signature winged chrome grille, giving the front fascia a sharper and more rugged appearance; the combination of black piano vertical grille and high-gloss chrome winged grille naturally draws the visual focus of the front end to the emblem.
6
4
Share

What car is the key symbol?

key symbol is not a car nor is there a car brand named key. Key means key. Usually, vehicles equipped with smart keys will display a key indicator light on the dashboard if the car cannot detect the key (the smart key is not inside the car or not within the effective range). At this time, the ignition switch cannot be turned. Under normal circumstances, switching the ignition switch to Off, taking out the key, and restarting the ignition will solve the problem. If the battery of the car remote key is dead, simply replace the battery by disassembling the shell of the remote key and installing a new battery of the same model.
5
1
Share

What is the first maintenance mileage for the Tiguan?

Tiguan's first maintenance is at 5,000 kilometers. Car maintenance, also known as car servicing, refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the vehicle. The Tiguan is a compact SUV under SAIC Volkswagen. The dimensions of this vehicle are: 4506mm in length, 1809mm in width, 1685mm in height, with a wheelbase of 2684mm. The body type is a 5-door, 5-seat SUV. The Tiguan features front-wheel drive, with front suspension type as MacPherson strut independent suspension, rear suspension type as multi-link independent suspension, and electric power steering.
20
0
Share

How to Remove a Static Cling Sticker?

There are two methods to remove a static cling sticker: 1. First locate a lifted corner, spray water into the gap between the sticker and glass, then peel it off slowly; 2. Alternatively, use a household hair dryer to apply heat by moving it back and forth around the sticker's edges, after heating for a while, the sticker can be removed. Automotive static cling stickers are new-generation products that replace traditional adhesive decals. These stickers utilize static electricity to adhere to smooth surfaces like car bodies and windshields without any glue. They can be easily applied and removed without leaving residue. Since static cling stickers are glue-free, they require smooth surfaces for proper adhesion.
18
2
Share

What is the normal RPM range for the Tharu?

The Tharu's normal RPM range is between 2000 and 3000. Generally, a car's engine can only demonstrate its advantages when the RPM exceeds 2000. The RPM range between 2000 and 4000 is considered the healthy operating zone, where the engine can better utilize its performance benefits. The engine's RPM directly relates to the number of work cycles per unit time or the effective power output of the engine. Powertrain specifications: The Tharu is equipped with 1.4T and 2.0T turbocharged engines, delivering maximum power outputs of 110kW and 137kW respectively, with peak torque of 175Nm, 250Nm, and 320Nm. Its dimensions are 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2688mm.
4
5
Share

How to fold the mirrors on an Audi A3?

Audi A3 mirror folding method: 1. The exterior mirror control switch is located on the left side of the driver's door, near the window control buttons; 2. Rotate the knob to position B to fold both left and right exterior mirrors. Turn the knob to position L or R, then rotate the knob to the left and adjust up/down/left/right to adjust the left mirror, or rotate to the right to adjust the right mirror. The Audi A3 is a sedan produced by Audi, developed on the Volkswagen MQB platform, featuring lightweight design and aluminum materials in its body construction. It is powered by multiple engines including 1.4TFSI and 1.8TFSI.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.