What causes the 2005 Fit to shake when starting?

1 Answers
OPenelope
07/29/25 11:29pm
First, remove the front bumper, then unscrew the headlight bolts to detach the headlights. Below is an introduction to the Fit: 1. Vehicle Design: The third-generation Fit (FIT) adopts the "Exciting-H Design" as its overall design concept, featuring Honda's latest family-style front face design called "Solid Wing," where the front grille and headlights are integrated to highlight a sharp and dynamic look. The side profile incorporates a unique and sporty "Blade" dual waistline design, creating an eager-to-move-forward momentum. The tension-filled rear design, paired with LED taillights, presents a more premium texture. 2. Configuration: The third-generation Fit (FIT) is the first to be equipped with Honda's new Earth Dreams Technology engine. The all-new 1.5L direct-injection DOHC i-VTEC engine delivers a maximum power of 96kW/6600rpm and a maximum torque of 155N·m/4600rpm, ranking first in its class for performance. Paired with the new CVT transmission, the third-generation Fit (FIT) achieves the lowest fuel consumption in its class at just 5.3L per 100km.
Was this review help?
15
0
Share
More Forum Discussions

Where is the rear window wiper switch located on a BMW?

BMW rear window wiper switch is located on a knob at the top of the wiper control stalk. Rotating it forward activates the rear wiper. Here's some BMW-related information: 1. Brand influence: Choosing BMW symbolizes status and taste, serving as a hallmark for successful individuals. 2. Logo meaning: BMW originally manufactured aircraft engines, leading many to mistakenly believe the emblem represents rotating propellers. However, the blue-and-white checkered pattern simply mirrors Bavaria's state coat of arms, honoring the company's Bavarian heritage.
11
2
Share

What are the symptoms of a faulty spark plug in one cylinder of a four-cylinder engine?

Damaged spark plugs may exhibit the following symptoms: difficulty starting the engine, reduced power, excessive exhaust emissions, and increased fuel consumption. Steps for replacing spark plugs: Open the engine hood, remove the plastic cover of the engine, detach the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris such as leaves or dust and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires according to the firing order and secure the cover. Spark plug replacement intervals: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the owner's manual. Refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
19
3
Share

How to Deal with Gasoline Smell in Exhaust During Cold Start?

This is a normal phenomenon, as all vehicles emit a gasoline smell during cold starts. The gasoline odor is related to the control method of the injection system, which operates in two modes: 1. Open-loop control and closed-loop control. During open-loop control, the system does not reference data from the oxygen sensor. For a period after the vehicle starts, the engine injection system operates under open-loop control. The high concentration of the air-fuel mixture results in unburned gasoline being expelled with the exhaust, which is why there is a gasoline smell in the exhaust. 2. After increasing the fuel injection, some gasoline cannot be completely burned and is expelled through the exhaust system. Therefore, there is no need to worry about the gasoline smell from the exhaust pipe during a cold start. The odor will disappear as the engine temperature rises.
8
2
Share

What is the standard for low beam height adjustment?

Low beam height adjustment standards vary depending on specific circumstances. Below is relevant information regarding headlight adjustment: 1. Headlight beam too high: Even if the vehicle has a headlight height adjustment knob, setting it to the initial "0" position may not help. The height can be adjusted by turning the corresponding adjustment knob located behind the headlight. The adjustment points and tools required differ across vehicle models, so it depends on the specific model—common tools include hex wrenches and Torx sockets. 2. Adjusting the in-cabin headlight height switch: The headlight height adjustment switch typically uses a rotary wheel marked with numbered positions. Higher numbers indicate higher beam angles, with the most suitable position varying based on actual conditions, as vehicle load can affect the outcome. 3. Automatic adjustment: Some vehicles are equipped with sensors that detect dynamic balance conditions and automatically adjust the lighting angle according to pre-programmed settings.
4
3
Share

How to Handle Highway Traffic Violations?

Highway traffic violations can be handled as follows: 1. If a vehicle owner commits a speeding violation on a provincial highway and is captured by an electronic eye, they can uniformly inquire and process it at the local highway traffic police department's service window. 2. If a vehicle owner commits a speeding violation on an out-of-province highway, they can inquire at the local highway toll station exit or duty point and handle it locally as required. According to Article 90 of the "Road Traffic Safety Law of the People's Republic of China," if a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic rules, they shall be given a warning or fined not less than 20 yuan but not more than 200 yuan. If there are other provisions in this law, the punishment shall be carried out in accordance with those provisions.
3
3
Share

Why does the car lack power when starting?

Car starting with lack of power can be divided into two situations: one is a normal phenomenon, and the other is a malfunction. Under normal circumstances, the lack of power when starting the car may be due to a cold start. A cold start means stepping on the accelerator abruptly when the engine is cold, which will cause the vehicle to accelerate slowly. This is a normal phenomenon and a kind of protection for the engine and other components. It may also be due to heavy load. This is because after driving alone for a long time, suddenly carrying a heavy load can also result in insufficient power. There are many reasons for the lack of power when starting the vehicle. If black smoke comes out of the exhaust pipe, it may be caused by a faulty oxygen sensor, which requires replacement for a test drive. It could also be due to poor valve sealing or insufficient cylinder pressure causing the lack of power when starting. And so on.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.