What Causes Sudden Cracks in Car Windows?

What is the original tire model of the JAC Refine S3?

1The original tire model of the JAC Refine S3 is 205/55R16. The first number 205 represents the tire width of 205MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width. The letter R stands for radial tire, and 16 represents the rim diameter of 16 inches. The JAC Refine S3 has a top speed of 165km/h and a fuel consumption of 6.7L per 100km. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as 'Standard Rim 5.00F'.

9

5

Share

Does the Illumination Distance of Vehicle Headlights Change from Far to Near at Night?

When the illumination distance of vehicle headlights changes from far to near at night, it indicates that the vehicle is currently going uphill. Regarding nighttime driving, changes in headlight illumination: On straight and level roads, the illumination distance remains unchanged. When encountering ordinary curves, the headlights follow the turn, shifting from the center of the road to the side. When going uphill, the headlights' illumination changes from far to near as the vehicle ascends. The symbols for low beam and high beam on the dashboard are different. Generally, emerald green indicates low beam, while dark blue indicates high beam. If another driver flashes their headlights at you while driving, it's best to check whether you have the high beams on, as this may affect others' normal driving. Nighttime driving: Changes in headlight position can help identify and assess road conditions. If the headlight illumination shifts from the center to the side of the road, the road ahead may have a general curve or continuous curves. In the case of continuous curves, the headlights will shift from one side of the road to the other. When driving at night, using low beams is usually sufficient for illumination, and high beams should only be used in special circumstances. If you notice that the headlight illumination is lifting off the ground while driving, possible road conditions ahead include: sharp curves, deep potholes, or reaching the top of a slope. When the headlight illumination shifts from the center to the side of the road, possible road conditions ahead include: general curves or continuous curves. In the case of continuous curves, the headlights will shift from one side of the road to the other.

11

1

Share

What Causes the Odyssey's Engine Warning Light to Illuminate?

There are two scenarios when the engine warning light illuminates: the vehicle has an engine system fault such as sensor issues, maintenance problems, fuel quality issues, poor fuel-air mixture combustion, engine intake problems, turbocharging issues, exhaust problems, or an anti-theft system malfunction. During vehicle startup, the engine performs a self-check, and in this case, the light will turn off after the self-check is completed. If the engine warning light remains illuminated for an extended period, it is advisable to promptly visit a service station for troubleshooting. Below is a detailed explanation of each potential fault: Sensor Issues: Sensors include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, leading to the illumination of the engine warning light. In such cases, it is essential to seek professional inspection at a service center to eliminate potential safety hazards. Maintenance Issues: Poor engine maintenance is the most common cause of the engine warning light turning on. Vehicles have specific maintenance schedules, and failure to adhere to these schedules, combined with poor driving habits, can increase the engine's operational burden, eventually triggering the engine warning light to alert the owner of a fault. Fuel Quality Issues: This refers to both fuel and engine oil. The fuel used in vehicles typically has a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend the appropriate fuel grade and engine oil type. If the owner fails to follow these recommendations, prolonged use can lead to engine wear, causing the warning light to illuminate. Always use the recommended fuel grade and suitable engine oil. Poor Fuel-Air Mixture Combustion: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can lead to poor combustion of the fuel-air mixture. This results in engine carbon buildup or knocking, which the oxygen sensor detects and reports to the ECU, triggering the warning light as a precaution. Intake Issues: Combustion in the engine requires proper air intake, where the air filter plays a crucial role. A dirty or uncleaned air filter can obstruct airflow, potentially leading to blockages and, in severe cases, causing the engine warning light to illuminate. Turbocharging Issues: Problems with the intake boost pipes or turbocharger can also cause the engine warning light to turn on. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust Issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the warning light. The most frequent cause is a malfunctioning catalytic converter, often due to the use of leaded gasoline, lead- or silicon-based oil additives, physical damage, or fuel system issues. Anti-Theft System: If the vehicle's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine ECU, the system may prevent the engine from operating normally, also causing the warning light to illuminate. Solutions for an Illuminated Engine Warning Light: If the engine warning light is on and the vehicle cannot start, this may be due to a faulty fuel pump or ignition components. In such cases, it is recommended to call for assistance immediately. If the engine warning light is on but the vehicle is still drivable, yet exhibits severe shaking or loss of acceleration, pull over safely and call for roadside assistance.

12

5

Share

What is ESP in cars?

ESP in cars stands for Electronic Stability Program, which analyzes vehicle driving state information from various sensors and then sends commands to systems like ABS and EBD to help maintain dynamic balance. ESP can keep the vehicle stable under various conditions, with particularly noticeable effects in cases of oversteer or understeer. The Electronic Stability Control System is an electronic device that has only been developed in recent years, inheriting and further expanding upon the functions of anti-lock braking and traction control. This device significantly improves vehicle braking stability.

5

1

Share

How to Drive Safely on Muddy Roads?

Methods for safe driving on muddy roads: 1. Reduce speed: Drive at medium to low speeds on muddy surfaces to allow the engine to output greater torque. 2. Minimize gear shifting: Avoid changing gears while driving on muddy roads. When pressing the accelerator pedal, the vehicle may stop due to high resistance, and restarting on muddy roads can be difficult. 3. Tire slippage: If one tire starts slipping on a muddy road, gently apply the handbrake and increase the throttle. Applying the handbrake stops the slipping tire from spinning freely, while increasing the throttle boosts the driving force on the other wheel, helping the vehicle to move out of the muddy area.

4

1

Share

What does it mean when the engine malfunction indicator light flashes?

Engine malfunction indicator light flashing may indicate a fault in a certain component of the engine, which is an abnormal phenomenon. There are three possible scenarios when the engine malfunction light flashes: 1. The light is on but there are no abnormal driving conditions - this may just be a sensor malfunction, and you can continue driving temporarily, but it's best to drive at low to medium speeds. 2. The engine malfunction light is on and the vehicle can still be driven, but there are severe vibrations, lack of acceleration power, and other symptoms - this situation requires roadside assistance. 3. The car cannot start - this may be caused by a fuel pump or ignition component failure, in which case you can only call for help.

9

2

Share

What Causes Sudden Cracks in Car Windows?

What is the original tire model of the JAC Refine S3?

Does the Illumination Distance of Vehicle Headlights Change from Far to Near at Night?

What Causes the Odyssey's Engine Warning Light to Illuminate?

What is ESP in cars?

How to Drive Safely on Muddy Roads?

What does it mean when the engine malfunction indicator light flashes?

What does 5w40 mean on engine oil?

What are the high-end car brands from South Korea?

Do I still need to go for vehicle inspection after applying for the exemption mark?

How to Check Tire Pressure on a Camry?