What Causes Steering Wheel Vibration When Braking?

Why does only one side of the rearview mirror tilt down when reversing?

Because traffic keeps to the right, vehicles are mostly parked with the right side close to the curb. Therefore, only the right-side rearview mirror tilts downward. If parking on the left side is necessary, since the driver sits on the left, it is easier to observe. Below are the related details: Function: The main function of the rearview mirror tilting down is to provide the driver with a view of the ground while reversing, ensuring driving safety. There are two methods to enable this feature: one is by adjusting the rearview mirror knob, and the other is through the central control system settings, which can activate the automatic tilting function when reversing. Additionally, it can be set by adjusting the memory seats. Automatic Adjustment: The automatic tilting down of the rearview mirror when reversing means that when the vehicle is shifted into R gear, the right-side rearview mirror automatically adjusts its angle downward to help the driver see the ground conditions.

15

5

Share

What is the principle behind car drifting?

The principle behind car drifting is that the rear wheels lose most or all of their grip, while the front wheels must maintain their grip, at most losing only a small portion, and ideally gaining additional grip. At this point, as long as the front wheels have a certain amount of lateral force, the car will fishtail, resulting in a drift. The preparations for car drifting are as follows: Choosing a car with suitable horsepower: For any track or road condition, horsepower between 300-550 is sufficient to meet the demands of drifting. If the horsepower is too high, the wheels are more prone to slipping, making it difficult to control during a drift. Choosing a car with suitable weight: Weight is a crucial factor in the drifting process. The weight of the car plays an important role in initiating the drift, maintaining stability during the drift, and stopping the drift. Cars with insufficient horsepower can utilize their weight, combined with the driver's skillful technique, to initiate a drift. However, heavier cars require more horsepower to compensate for their excessive weight. The heavier the car, the more difficult it is to drift.

19

4

Share

Are China III Diesel Vehicles Yellow Label Vehicles?

China III diesel vehicles are not yellow label vehicles. Emissions of yellow label vehicles: Comparing by emission limits, the emissions of a yellow label vehicle are equivalent to 5 China I vehicles, 7 China II vehicles, 14 China III vehicles, or more than 20 China IV gasoline vehicles. These in-use vehicles, after passing regular environmental inspections and meeting relevant in-use vehicle emission standards, are issued a yellow environmental inspection compliance label and are allowed on the road. Due to their high single-vehicle emissions, yellow label vehicles should be prioritized for control and phase-out. Criteria for identifying yellow label vehicles: The identification of yellow label vehicles is based on tailpipe emissions. Here, we discuss China I and China III standards. China implemented the 'Limits and Measurement Methods for Emissions from Light-Duty Vehicles (I)' in 2001, equivalent to Euro I standards. In 2007, the 'Limits and Measurement Methods for Emissions from Light-Duty Vehicles (III)' was implemented, equivalent to Euro III standards.

18

3

Share

Should You Sit in the Back Seat or Front Passenger Seat in a Car?

Whether to sit in the front passenger seat or the back seat when riding in someone else's car depends on the situation. If you're in a familiar person's car, it's appropriate to sit in the front passenger seat as a sign of respect, and it also allows for conversation during the drive, helping to reduce driver fatigue. Precautions for sleeping in a car are as follows: Ventilation: When sleeping in a car, always leave a gap to allow air circulation. Do not close all windows and doors completely to avoid oxygen deprivation and suffocation. However, the gap should not be too large to prevent attracting unwanted attention or theft. Air Conditioning Usage: When sleeping in a car, it's best to turn off the compressor and switch the air conditioning to external circulation mode to allow natural airflow into the car. Avoid using the compressor and internal circulation mode to prevent carbon monoxide poisoning. Parking Location: Choose an open area to park when resting in a car. Avoid parking in underground garages or other confined spaces to prevent carbon monoxide buildup.

6

5

Share

Does a Deformed Condenser Have Any Impact?

Certainly, a deformed car condenser affects heat dissipation, but the impact is not severe since only a single condenser tube is damaged, which can be repaired by welding. Even without welding, it can still be used by simply sealing off the damaged tube. Generally, if the damaged condenser tubes do not exceed 10%, the condenser can continue to be used. Below is a detailed introduction about car maintenance: Overview: Car maintenance is a general term for the upkeep and repair of automobiles. It involves using technical methods to diagnose faulty cars, identify the causes of malfunctions, and take measures to eliminate the faults and restore the car to certain performance and safety standards. Others: Car maintenance includes major repairs and minor repairs. Major car repairs refer to restorative repairs that use methods of repairing or replacing any car parts (including fundamental components) to restore the car's sound technical condition and fully (or nearly fully) recover its lifespan. Minor car repairs refer to operational repairs that use methods of replacing or repairing individual parts to ensure or restore the car's operational capability.

13

1

Share

Which three manufacturers produce the world's top three sports cars?

Internationally, the widely recognized top three sports car manufacturers are Ferrari, Lotus, and Porsche. Lotus: Lotus is a world-renowned manufacturer of sports cars and racing cars, headquartered in Hethel, Norfolk, UK. Founded in 1948 by Colin Chapman, its sports cars are celebrated for their pure driving pleasure and lightweight design. The brand's logo features the letters ACBC, which are the initials of the founder's name. Ferrari: Ferrari is a globally famous manufacturer of racing and sports cars, based in Maranello, Italy. Established in 1947 by Enzo Ferrari, the company primarily produces Formula 1 racing cars, race cars, and high-performance sports cars. Porsche: Porsche is a world-famous luxury car brand under the Volkswagen Group in Germany, also known as 'Porsche'. Headquartered in Stuttgart, Germany, it is one of the leading representatives of European and American automobiles.

1

0

Share

What Causes Steering Wheel Vibration When Braking?

Why does only one side of the rearview mirror tilt down when reversing?

What is the principle behind car drifting?

Are China III Diesel Vehicles Yellow Label Vehicles?

Should You Sit in the Back Seat or Front Passenger Seat in a Car?

Does a Deformed Condenser Have Any Impact?

Which three manufacturers produce the world's top three sports cars?

Where is the production date of a Varta battery located?

Which side of the road do cars drive on in China?

Is there a purchase contract when buying a car?

How to Reset the Tire Pressure Warning Light on Volkswagen Tiguan?