What Causes Steering Wheel Noise When Turning a Car?

1 Answers
ColemanAnn
07/29/25 4:38pm
Reasons for steering wheel noise when turning a car: 1. The car's plain bearing is damaged. In this case, simply replace the plain bearing with a new one. If the noise persists after replacement, it is necessary to visit a car repair shop or 4S store for professional inspection and repair; 2. When the plain bearing of the shock absorber is damaged, the car will produce noise when turning. In this situation, the plain bearing of the shock absorber needs to be inspected and repaired; 3. There are multiple reasons for steering gear failure, including lack of lubrication oil in the steering gear, detachment of the steering gear rubber sleeve, or damage to the steering gear gear. The specific situation requires inspection and repair at a repair shop or 4S store.
Was this review help?
15
0
Share
More Forum Discussions

Is Car Waxing Harmful to Health?

Car waxing can be harmful to health. The main components of car wax are paraffin and aromatic agents, which are benzene compounds known as carcinogens. When applying wax inside the vehicle, it is necessary to open windows for ventilation. The benefits of car waxing include: 1. Waterproofing effect, reducing watermarks, dark spots, rust, and damage on the paint surface; 2. Anti-aging effect, reducing UV damage to the paint surface and extending the life of the paint; 3. Aesthetic effect, improving the smoothness of the car paint to varying degrees and making the body color more vibrant; 4. Anti-static effect, reducing damage to the paint caused by friction with dust, wool fabrics, synthetic fibers, etc. in the air; 5. Anti-corrosion effect, effectively isolating damage from acid rain and acid mist to the car paint.
11
2
Share

What are the reasons for the BYD F3 not responding when starting?

BYD F3 not responding when starting could be due to: 1. Car battery depletion: The battery lacks water or has malfunctioned; 2. Low temperature: The viscosity of the car engine oil decreases, making it harder to start—try pressing the clutch before starting; 3. Ignition system issues: It's necessary to check the vehicle's spark plugs and high-voltage wires; 4. Insufficient fuel: Always monitor the fuel level in the tank and refuel when it nears the warning level; 5. Carbon buildup: Excessive carbon deposits inside the engine require timely cleaning; 6. Fuel pump damage: This prevents fuel in the tank from being supplied for combustion.
13
3
Share

Can a C2 License Drive Manual Transmission Vehicles?

C2 license holders cannot drive manual transmission vehicles, as the C2 driver's license only permits operating automatic transmission vehicles. The vehicle types allowed for different license classes are as follows: C1 license allows driving small cars, mini passenger vehicles, light and mini cargo trucks, and special operation vehicles; C2 license permits driving small and mini automatic transmission passenger vehicles, as well as light and mini automatic transmission cargo trucks; C3 license is for low-speed cargo trucks; and C4 license is for three-wheeled vehicles. The standard operating procedure for automatic transmission vehicles is: 1. Turn the ignition key to the power position to initiate the vehicle's computer system self-check for approximately 6 seconds; 2. Press the foot brake and shift the gear from P (Park) to N (Neutral), then turn the ignition key to the start position to ignite the engine after releasing the foot brake; 3. Press the foot brake, release the handbrake, shift from N (Neutral) to D (Drive), and gradually release the foot brake to start moving.
3
5
Share

What is the oil capacity for the Nissan Patrol 4.0?

The oil capacity for the Nissan Patrol 4.0 is 5 liters. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To minimize gas leakage and prevent contamination from external pollutants; 3. To protect components from contact with water, air, and harmful acidic gases; 4. To cushion the pressure rise in the engine cylinders; 5. To clean away contaminants generated on the surfaces of components. Symptoms of overfilling engine oil include: 1. Increased rotational resistance of the crankshaft; 2. Reduced engine power output; 3. Potential oil burning and blue smoke emissions; 4. Accelerated wear of cylinders and pistons. The solution for overfilled oil is to use a syringe to extract the excess oil.
7
4
Share

Do new cars need antifreeze in winter?

New cars require antifreeze in winter. The original antifreeze is a high-concentration ethylene glycol-based type, whose freezing point varies with the ethylene glycol concentration in the aqueous solution. The procedure for adding coolant is as follows: 1. Unscrew the radiator cap, open the radiator drain valve, and drain the antifreeze; 2. Insert a rubber tube into the radiator filler neck, then turn on the tap to flush the engine cooling system; 3. After draining all water from the cooling system, close the radiator drain valve; 4. Unscrew the reservoir cap and add antifreeze until the liquid level reaches the MAX mark; 5. Tighten the reservoir cap; 6. Start the engine and let it idle for 2-3 minutes, then unscrew the radiator cap to allow the cooling system to expel air. The antifreeze level will drop - replenish it again until reaching the MAX mark.
10
3
Share

Does leaving the air conditioning on when turning off the engine affect the car?

Leaving the air conditioning on when turning off the engine does affect the car, as it increases the load on the motor, damages the engine, and promotes bacterial growth. The components of the air conditioning system include: the compressor, electronic control clutch, condenser evaporator, expansion valve, receiver-drier, piping, condenser fan, vacuum solenoid valve, idle speed controller, and control system. The functions of the air conditioning system are: 1. Regulating the interior temperature and filtering the air entering the cabin; 2. Absorbing moisture from the air; 3. Maintaining clean air and preventing bacterial growth. Air conditioning maintenance methods include: 1. Promptly adding refrigerant; 2. Regularly replacing the filter; 3. Using ozone for sterilization.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.