What Causes Small Bulges on the Side of Car Tires?

1 Answers
McBrody
07/29/25 12:05pm
Here are the possible reasons for small bulges on the side of tires: 1. During tire usage, frequent friction with hard objects, prolonged overloading of the vehicle, or long-term use under non-standard tire pressure can all lead to bulging. 2. If bulges appear in multiple areas of the tire, it is largely due to quality issues. Defective products caused by manufacturing defects can also result in tire bulges. Problems in the raw materials or manufacturing process, including insufficient rubber composition, can lead to inadequate hardness and thickness of the tire sidewall, causing frequent bulging. 3. Impact on the tire, such as suddenly hitting a curb, quickly driving over a speed bump, or running over a large pothole, can cause severe compression. The internal air pressure increases, and the weak sidewall may bulge outward. 4. Poor road conditions, such as driving at high speed over rocky or rough roads, especially hard and uneven surfaces, or protruding manhole covers, can significantly impact the tire. Inconspicuous but highly damaging road irregularities can also be a major cause of bulges. 5. During vehicle use, avoid parking the car tilted against curbs to prevent sharp edges from puncturing or cutting the tire sidewall. When driving over speed bumps, slow down to minimize wear and thinning of the tire sidewall, which can lead to bulges. When purchasing or replacing tires, buy from authorized dealers to ensure quality reliability.
Was this review help?
2
5
Share
More Forum Discussions

What Causes the Abnormal Noise When Turning the Steering Wheel in Place?

Abnormal noise when turning the steering wheel in place is caused by a malfunction in the vehicle's steering system. The source of the malfunction varies, leading to different types of noises, which require step-by-step inspection. The specific reasons are as follows: 1. Noise from the steering column dust cover: Whether the car is in motion or turning the steering wheel in place, this sound can be heard coming from below the steering wheel. In such cases, the steering column dust cover needs to be inspected. If the steering column dust cover lacks lubrication, it will produce a dry friction sound. Simply applying some grease to this area will eliminate the noise. 2. Noise from interference with the clock spring: When the car turns the steering wheel in place, the sound comes from inside the steering wheel. This issue is mostly due to interference with the clock spring inside the steering wheel, often caused by damage to the clock spring, which requires timely replacement.
13
0
Share

What is the difference between Mobil Silver Fashion Edition and Mobil Silver?

The differences between Mobil Silver Fashion Edition and Mobil Silver are as follows: 1. Engine oil aspect: Both Mobil Gold and Mobil Silver are fully synthetic oils, but Mobil Gold contains more SUPERSYN formula, offering longer service life and superior performance. The Gold version is a lower viscosity, higher quality fully synthetic oil. Mobil Silver is significantly better than OEM oil in quality, providing better engine protection. 2. Source aspect: Mobil Gold is packaged in Singapore, with most currently sourced from Japan. Mobil Silver 5W30 uses the 5th generation formula with average performance. 3. Fuel efficiency aspect: In terms of fuel efficiency, Mobil 1 Silver is not as outstanding as Mobil 1 Gold. Mobil Gold 5W30 and 0W40 are top-tier Mobil 1 oils with newer formulations, belonging to the 6th generation formula.
20
2
Share

How long is the validity period for a driver's license study?

The validity period for a driver's license study is three years. The information regarding the validity period for a driver's license study is as follows: 1. According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses', the validity period for the driver's license examination starts from the date of registration. After passing the subject one test, the validity period is three years. All subject tests must be completed within these three years. If subject one has not been taken or the test is failed, the registration fee remains valid indefinitely. 2. Article 38 states that applicants learning to drive on training grounds and roads must obtain a study driving certificate as required. The study driving certificate is valid for three years, and applicants must complete subject two and subject three tests within this validity period. If the tests are not completed within the validity period, the passed subject test results will be invalidated.
20
4
Share

What is the reason for the brake becoming hard after pressing it several times in a row?

The brake becoming hard after pressing it several times in a row may be due to lack of necessary maintenance of the brake system, too much impurities in the brake master cylinder, poor sealing, or failure of the vacuum booster pump. Driving precautions are as follows: 1. Develop the habit of fastening the seat belt when getting in the car: The importance of seat belts for driving safety is self-evident, and many bloody examples have warned that you must fasten your seat belt when entering the car. But there are always some people who feel that the seat belt restricts their activity space or even find it uncomfortable and do not fasten it. 2. Make sure the car door is closed tightly when driving: If you are not sure whether the door is closed tightly, don't be afraid of trouble, you should open the door and close it again with force. For vehicles equipped with a door-not-closed reminder function, pay attention to whether there is an alarm sound or whether the reminder light on the dashboard is on.
6
0
Share

What is the car depreciation rate?

Car depreciation rates are typically 11% for the first 3 years, 10% from the 4th year onwards, and 9% for the subsequent 3 years. Here is a detailed introduction to car depreciation rates: 1. Regulations: The first 3 years at 11%, from the 4th year onwards at 10%, and the subsequent 3 years at 9%. For the first 3 years, the annual depreciation rate is 11%, totaling 33% over 3 years. From the 4th year, the annual depreciation rate is 10%, totaling 40%. For the subsequent 3 years, the annual depreciation rate is 9%, totaling 27%. According to tax regulations, passenger cars have a depreciation period of 5 years with a residual value rate of 5%. 2. Effect: The higher the depreciation rate, the worse the vehicle's condition and the lower its residual value.
20
4
Share

How to Clean a Car Chassis?

Cleaning a car chassis involves the following steps: 1. Lift the car to a working height and use a high-pressure water jet to rinse the chassis. Pay special attention to curved areas, edges, and fenders, ensuring no mud or grease remains. 2. For particularly stubborn grease, use a degreasing cleaner and a scraper to carefully clean until the chassis returns to its original color. 3. If rust is present, remove it with sandpaper. After cleaning, dry and wipe the chassis, then evenly apply a rust-proofing agent to form a durable protective film. Allow it to air dry naturally once the process is complete. Additional information: The chassis refers to the combination of the transmission system, running gear, steering system, and braking system in a car. It supports and mounts the car engine and its components, forming the overall structure of the vehicle, bearing the engine's power, and ensuring normal operation.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.