What Causes Slow Ignition Response?

1 Answers
AryaLee
07/30/25 9:26am
If the ignition response is sluggish when the engine is cold but normal when warm, it is likely related to cold weather. In winter, lower temperatures cause the engine block to be cold during startup, making fuel difficult to atomize. This results in insufficient mixing of fuel and air in the cylinders, leading to a sharp drop in gasoline vaporization. Below is relevant information about vehicle startup: 1. Precautions: Cold starts require engine preheating. The preheating time depends on the temperature, but generally, idling should return to normal before driving. Always remember to fasten your seatbelt and check if the driver's seat and rearview mirror positions are appropriate—adjust if necessary. 2. Tips: Wait about 5 seconds before starting the car to allow the onboard computer to perform checks. After starting, the RPM may reach 2500, then drop to 800 after some time. This is because cold idling is higher, while warm idling returns to normal.
Was this review help?
16
3
Share
More Forum Discussions

What is the spark plug model for the Langdong?

The spark plug model for the Langdong is silzkr6b10e. The function of the spark plug is to discharge the pulsed high-voltage electricity sent from the high-voltage wire, break down the air between the two electrodes of the spark plug, and generate an electric spark to ignite the mixed gas in the cylinder. The types of spark plugs include: 1. Standard spark plug; 2. Insulator projection spark plug; 3. Electrode spark plug; 4. Seat spark plug; 5. Pole spark plug; 6. Surface jump spark plug. Taking the 2016 Langdong as an example, it is a compact car with a body size of 4570mm in length, 1775mm in width, 1445mm in height, a wheelbase of 2700mm, a minimum ground clearance of 150mm, and a body weight of 1233kg.
16
3
Share

Why are the four tire pressures different?

Tire pressure is manually adjusted, so there will inevitably be some deviations. As long as the differences are not too significant, it's generally fine. The hazards of low tire pressure are: 1. Increased friction coefficient with the road surface; 2. Causes heavy steering and a tendency to veer, which are factors detrimental to driving safety; 3. Increases the movement of various parts of the tire, leading to abnormal heating due to excessive rolling. The hazards of high tire pressure are: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Causes steering wheel vibration and veering, reducing driving comfort; 3. Accelerates localized wear of the tread pattern in the center of the tire, shortening tire lifespan; 4. Increases body vibration, indirectly affecting the lifespan of other components.
19
0
Share

What car has the logo with two Rs?

The car with the logo featuring two Rs is Rolls-Royce. Rolls-Royce, also known as Rolls-Royce Motor Cars, was founded in the UK in 1906 by Henry Royce and Charles Rolls. The hood ornament of Rolls-Royce cars is the Spirit of Ecstasy, which was registered as the official mascot of Rolls-Royce on February 6, 1911. It was designed by the British painter and sculptor Charles Sykes. Common models under Rolls-Royce include: Phantom, Cullinan, Ghost, Wraith, and Dawn. Below are detailed introductions of these models: Rolls-Royce Phantom: Overall dimensions 5770mm*2018mm*1648mm, equipped with a 6.7T V12 twin-turbocharged engine producing a maximum of 571 horsepower, paired with an 8-speed automatic transmission, maximum power 420kW, maximum power speed 5000rpm, front suspension uses double-wishbone independent suspension, rear suspension uses multi-link independent suspension. Rolls-Royce Cullinan: Overall dimensions 5341mm*2000mm*1837mm, equipped with a 6.7T V12 twin-turbocharged engine producing a maximum of 600 horsepower, paired with an 8-speed automatic transmission, maximum power 441kW, maximum power speed 5000rpm, front suspension uses double-wishbone independent suspension, rear suspension uses double-wishbone independent suspension. Rolls-Royce Ghost: Overall dimensions 5716mm*2148mm*1571mm, equipped with a 6.7T V12 twin-turbocharged engine producing a maximum of 571 horsepower, paired with an 8-speed automatic transmission, maximum power 420kW, maximum power speed 5000rpm, front suspension uses double-wishbone independent suspension, rear suspension uses double-wishbone independent suspension. Rolls-Royce Wraith: Overall dimensions 5285mm*1947mm*1507mm, equipped with a 6.6T V12 twin-turbocharged engine producing a maximum of 632 horsepower, paired with an 8-speed automatic transmission, maximum power 465kW, maximum power speed 5600rpm, front suspension uses double-wishbone independent suspension, rear suspension uses multi-link independent suspension. Rolls-Royce Dawn: Overall dimensions 5295mm*1947mm*1506mm, equipped with a 6.6T V12 twin-turbocharged engine producing a maximum of 601 horsepower, paired with an 8-speed automatic transmission, maximum power 442kW, maximum power speed 5250rpm, front suspension uses double-wishbone independent suspension, rear suspension uses multi-link independent suspension.
7
1
Share

What are the reasons for gear shifting hesitation in the transmission?

The reasons for gear shifting hesitation in the transmission are: 1. Excessive clutch free play; 2. Faulty transmission shift mechanism; 3. Clutch pressure plate failure; 4. Transmission synchronizer malfunction. The solutions for gear shifting hesitation in the transmission are: 1. Replace the transmission fluid; 2. Contact the local 4S store for inspection and repair. The functions of the transmission are: 1. Change the transmission ratio; 2. Expand the torque and speed of the driving wheels; 3. Enable the car to reverse; 4. Facilitate gear shifting or power output. The maintenance methods for the transmission: 1. Frequently check the fluid level; 2. Do not skip gears when upshifting; 3. Do not force the transmission into neutral; 4. Do not shorten the idle warm-up time; 5. Avoid gear grinding when shifting.
4
0
Share

What is the oil specification for Subaru?

Subaru's oil specification is 0W20. In 0W20, 0W indicates that the oil can maintain normal fluidity at -35 degrees Celsius, allowing it to be circulated by the oil pump to various friction surfaces for lubrication while ensuring lubrication quality; 20 indicates that the oil can achieve a viscosity coefficient of 20 at 100 degrees Celsius. Taking the Subaru XV as an example: it is a new crossover model that combines sportiness and leisure, achieving an excellent balance between fuel efficiency, driving pleasure, and stylish, unique exterior design, making it an ideal choice for urban individuals seeking vitality and passion.
14
0
Share

What engine does the Mitsubishi Outlander use?

The Mitsubishi Outlander uses 2.0L and 2.4L naturally aspirated engines, with model numbers 4J11 and 4J12 respectively. Taking the 2020 Mitsubishi Outlander as an example, its body dimensions are: length 4705mm, width 1810mm, height 1710mm, wheelbase 2670mm, fuel tank capacity 63L, and curb weight 1485kg. The 2020 Mitsubishi Outlander has a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L naturally aspirated engine, producing a maximum horsepower of 166PS, maximum power of 122kW, maximum torque of 201Nm, and is paired with a 6-speed continuously variable transmission.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.