···
Log in / Register

What Causes Slightly High Car Water Temperature?

4 Answers
VonCollin
09/04/25 8:02am

Reasons for slightly high car water temperature: 1. Coolant leakage or insufficient coolant can cause the engine water temperature to rise. Check the coolant level and add coolant to the appropriate level if necessary; 2. Faulty radiator fan. When the vehicle is running at high speeds, the generated heat cannot be transferred to the antifreeze in time, affecting heat dissipation. This can lead to an increase in antifreeze temperature, causing issues like boiling over; 3. Water pump failure, which can include seized bearings or damaged impellers. Seized bearings are relatively rare, while damaged impellers, such as cracked impellers or impellers loosening from the pump shaft, are more common. This slows down the coolant circulation speed, easily leading to engine overheating issues.

Was this review help?
13
2
Share
OCamila
09/17/25 2:05am

I've encountered the issue of high engine temperature several times, and it's mostly due to problems with the cooling system. The radiator might be clogged with debris or scaled internally, preventing heat dissipation, which worsens when the fan fails to operate. It could also be a stuck thermostat that prevents coolant circulation. If the coolant level is low, indicating a low water tank level, there's likely a leak, such as from aging old hoses or a failed water pump seal. High temperatures or using the air conditioning can exacerbate the issue, as the engine is under greater load. If you notice the temperature gauge rising, immediately pull over to check the water tank and add coolant or clean water as an emergency measure, then head to a repair shop as soon as possible. Regular maintenance, including cleaning the radiator and replacing the coolant every two years, can prevent such problems. Additionally, avoid excessive deceleration when towing or climbing hills, as driving conditions also affect heat control. Paying attention to these details can help protect the engine's lifespan.

Was this review help?
9
5
Share
Expand All
ColtonAnn
10/31/25 2:36am

I've been driving for over twenty years, and high engine temperature isn't uncommon. Last winter during a long trip, the temperature gauge suddenly spiked—turns out the radiator was clogged with dust and the fan stopped working. Sometimes coolant leaks from cracks in the radiator or loose hose connections, and topping it off usually does the trick. A faulty thermostat is a common culprit; if it gets stuck and blocks coolant circulation, the engine temperature naturally rises. If the gauge shows high readings while driving, don't panic—slow down, pull over safely, pop the hood to let it cool, and add some coolant as an emergency measure. Safety first, or you risk serious engine damage like overheating, cylinder scoring, or knocking. I recommend checking the coolant level monthly to keep it topped up, avoiding hard water. Regular professional inspections ensure the fan and water pump are functioning properly. Developing these habits significantly reduces risks while saving money and hassle.

Was this review help?
6
0
Share
Expand All
AngeloDella
12/14/25 2:44am

When I first started driving, high engine temperature was quite scary. Simply put, it's mostly due to insufficient coolant or a broken fan that can't blow air. Stop the car, open the engine compartment, and check the radiator—if it's empty, adding some new coolant can help. It could also be a faulty thermostat stuck or aging pipes with leaks. Don’t ignore dashboard warning signals; stop the car promptly and let the engine cool down. For prevention, visually inspect the radiator weekly and clean external dirt to prevent clogging. In summer heat, reduce AC usage to ease engine load—these small actions are practical and effective.

Was this review help?
16
0
Share
Expand All
More Forum Discussions

What is the ground clearance of the LaCrosse?

The ground clearance of the LaCrosse is 140mm. Design considerations for ground clearance: The design of the minimum ground clearance must account for the passability of loading platforms during transportation and ensure that the car does not scrape when driving close to ordinary curb edges. If the vehicle is intended for sale in a specific country or region, local road conditions must also be considered. Relevant information about ground clearance: Generally, the minimum ground clearance for sedans ranges between 110mm and 150mm. For sedans, a larger ground clearance (exceeding 130mm) provides relatively better passability but poorer high-speed stability, while a smaller ground clearance (below 110mm) offers better high-speed stability but poorer passability.
20
5
Share

Which button is for defogging?

There are two defogging buttons in a car: one is for the front windshield defogging, marked with a fan-shaped symbol containing three upward wavy lines. The other is for the rear windshield defogging, marked with a rectangular symbol containing three upward wavy lines. Below is the relevant introduction: Defogging: The principle of fog formation on the windows is caused by the temperature difference between "cold outside and warm inside." The temperature inside the car is higher than the outside temperature, leading to fog formation. Turning on the A/C switch puts it in a cooling state. The advantage of this method is quick defogging, but the downside is that it is not suitable for winter. Another method is using the heating system for defogging. This method also works well for defogging, but the drawback is that it takes a few minutes. Benefits: The car defogging button can reduce moisture, fog, and frost on the front and rear windshields and the exterior rearview mirrors, improving the driver's visibility and making driving safer.
9
2
Share

Can the original 4-ohm speaker be replaced with a 2-ohm one?

Yes, the original 4-ohm speaker can be replaced with a 2-ohm one. Here is an introduction to car speakers: Working principle: The car electric horn produces sound through the vibration of a metal diaphragm. The car electric horn consists of an iron core, a magnetic coil, contacts, an armature, a diaphragm, etc. When the driver presses the horn switch, current flows through the contacts to the coil, generating a magnetic force that pulls the armature down, forcing the diaphragm to move. The movement of the armature opens the contacts, interrupting the current and causing the magnetic force of the coil to disappear. The diaphragm, along with the armature, returns to its original position due to its own elasticity and the spring plate, closing the contacts again and restoring the circuit. Current then flows through the contacts to the coil, generating magnetic force and repeating the above process. This cycle repeats continuously, causing the diaphragm to vibrate and produce sound. Different types: Car horns can be divided into air horns and electric horns based on the sound power; they can be classified into cylindrical, spiral, and basin-shaped based on their appearance; and they can be categorized into high-frequency horns and low-frequency horns based on the sound frequency.
14
4
Share

What is the width of a bidirectional six-lane road?

The width of a bidirectional six-lane road is 3.75 meters, with a mandatory separation zone or green belt in the middle. When necessary, an extra-wide non-motorized vehicle lane of over 3.5 meters and a sidewalk of over 4 meters must be established. For a bidirectional six-lane expressway, the design speed is 80-120 km/h, with a subgrade width of over 33 meters. Each lane is 3.75 meters wide, requiring the installation of green belts, shoulders, emergency lanes, and emergency parking strips ranging from 1.5 to 3.5 meters. A separation zone is set up in the middle of the road, using high-grade pavement materials such as asphalt concrete or cement concrete. The road is equipped with complete signage, markings, signals, and lighting installations. Pedestrians and non-motorized vehicles are prohibited from walking on the road, with intersections designed as overpasses, pedestrian bridges, or underpasses. Highway construction is a linear project, and the social, economic, and natural environments along the route can vary significantly. The terrain, features, and traffic volume may not be identical and can even differ greatly. Therefore, for a relatively long highway, different numbers of lanes or different highway grades can be adopted in sections based on changes in the surrounding conditions and traffic volume.
16
3
Share

What Does It Mean When the Rearview Mirror Shows a Wider Front and Narrower Rear?

When reversing, if the car body in the rearview mirror appears wider at the front and narrower at the rear relative to the roadside line without turning, it indicates that the car is moving straight backward. If the left rearview mirror shows the car body parallel to the roadside line or narrower at the front and wider at the rear, it means the front of the car is tilted to the right, and you should slightly turn the steering wheel to the left to adjust the vehicle. Below is additional information: Precautions for reversing: When reversing, it is essential to observe the surrounding environment carefully, especially in areas with potential blind spots. It is advisable to honk in advance and be prepared to brake at any time. Safety measures: Before reversing, check the rear situation, estimate the reversing path, and ensure the front of the car won't hit any obstacles during the process. Particularly when turning the steering wheel significantly, the turning radius of the front wheels is larger than that of the rear wheels, causing the front of the car to swing outward more noticeably. Be cautious to avoid scraping the front of the car. Reversing techniques: This method is more suitable for parking on the right side and when a longer reversing distance is needed. If the rear of the car needs to move toward the right rear, turn the steering wheel to the right; conversely, turn it to the left. This is consistent with the steering operation when driving forward. Do not focus solely on the rear while reversing. After ensuring the rear is safe, periodically check the left and right rearview mirrors to monitor the distance between obstacles and the car body, and use the steering wheel to adjust the car's position as it moves backward.
18
5
Share

What are the hidden features of the Geely Emgrand GL?

Geely Emgrand GL hidden features are as follows: Trunk escape route: Fold down the rear seats to access the trunk, which requires crawling forward, then pull out the mechanical key, insert it into this small hole, and slide it in one direction to open. If the car is submerged in water, prioritize opening the door to escape or exiting through the windows; the trunk should be the last resort. Child safety lock: Although Geely has adopted Volvo's door technology, requiring the door handle to be pulled twice to open, it's safer to lock it when children are seated alone in the back. Once locked, the door can only be opened from the outside. Adjustable seat belt height: Press down on this buckle to adjust the seat belt position up and down, matching the seat belt to the passenger's height for comfort, avoiding neck strain, and ensuring safety to maximize the seat belt's effectiveness. Rear reading light: Located overhead, it's easy to overlook due to the 'light under the lamp' effect. The brightness of this light is decent, but it's not recommended to keep it on for long periods because excessive interior brightness at night can visually impair driving. Remote key window control: This feature is very practical. Sometimes after turning off the engine, if you find the windows aren't closed, you don't need to start the engine to power up; simply long-press the lock button, and the windows will automatically close. Follow-me home: After the car is turned off, the headlights can automatically stay on for a set period. This helps illuminate the way home in dimly lit parking lots. Additionally, the duration of the light delay can be adjusted, typically around 30 to 50 seconds.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.