What Causes Slight Vibration During Car Idling?

1 Answers
VonGiselle
07/25/25 4:21am
The reasons for slight vibration during car idling are as follows: 1. The engine mount, which serves as the engine's shock absorption system, is primarily responsible for absorbing minor vibrations during engine operation. When the engine mount ages, it can cause vibrations during idle. 2. Ignition system failure, such as spark plugs "misfiring," can lead to car idle vibrations. It is advisable to promptly visit a 4S shop or repair facility for maintenance. 3. A dirty throttle body or excessive carbon buildup in the fuel injectors can also cause car idle vibrations. Cleaning the fuel system is necessary, and using higher-quality fuel or adding fuel system cleaner during refueling is recommended.
Was this review help?
17
4
Share
More Forum Discussions

What is the fuel consumption of the Buick Envision per 100 kilometers?

The fuel consumption of this vehicle varies depending on the engine displacement. The official combined fuel consumption provided by the Ministry of Industry and Information Technology is 7.7 liters per 100 kilometers, which is not considered high. However, actual driving conditions may result in higher consumption. Below are some relevant details: 1. Fuel consumption differences: Driving conditions affect fuel efficiency the most when maintaining a steady speed and optimal engine RPM. Using the air conditioning system will increase fuel consumption. The actual combined fuel consumption is influenced by multiple factors such as vehicle load, road conditions, driving habits, weather, wind speed, and tire pressure. 2. Precautions: If abnormal fuel consumption is noticed, it is important to promptly inspect the vehicle for faults and visit a repair shop to identify and address the issue.
2
4
Share

What to Do If You Cross the Stop Line at a Traffic Light?

If you immediately stop after crossing the stop line at a red light, it is not considered running a red light and no points will be deducted. Here are the relevant details: 1. Running a red light: To determine whether a vehicle has run a red light, three photos are required. The first photo shows the vehicle crossing the stop line, the second shows the entire vehicle beyond the stop line, and the third shows the vehicle passing through the intersection. The photos also reflect the traffic light information. When all three photos are present, it is considered running a red light, resulting in a 6-point deduction. 2. Not considered running a red light: If the vehicle has just crossed the stop line at a red light and immediately stops, it is not considered running a red light. Even if the entire vehicle crosses the stop line, it is still not considered running a red light. However, this situation is considered illegal parking. According to regulations, failing to drive or park as required at an intersection results in a 2-point deduction.
2
3
Share

What kind of oil does the Buick Envision use?

Buick Envision uses 5w30 oil. The functions of the oil are: 1. To separate the surfaces of relatively sliding parts, thereby reducing wear; 2. To bring heat back to the oil tank and then dissipate it into the air to help the radiator cool the engine; 3. To circulate carbon deposits, sludge, and worn metal particles on engine parts back to the oil tank, and flush away dirt generated on the working surfaces of the parts through the flow of the lubricating oil. Taking the 2021 Buick Envision as an example, it belongs to the midsize SUV category, with body dimensions of: length 4694mm, width 1839mm, height 1686mm, wheelbase of 2750mm, fuel tank capacity of 66l, and curb weight of 1610kg.
10
1
Share

Will I be fined for driving at 90 km/h when the minimum speed limit on the highway is 100 km/h?

Driving at 90 km/h when the minimum speed limit on the highway is 100 km/h will result in a fine. Below are the specific regulations regarding highway speed limits: 1. Minimum speed limit regulations: The minimum speed for motor vehicles driving normally on the highway must not be less than 60 km/h. If there are two lanes in the same direction, the minimum speed for the left lane is 100 km/h; if there are three or more lanes in the same direction, the minimum speed for the far-left lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h. 2. Maximum speed limit regulations: The maximum speed for small passenger vehicles must not exceed 120 km/h, while other motor vehicles must not exceed 100 km/h, and motorcycles must not exceed 80 km/h. If the speed indicated by road speed limit signs differs from the above lane speed regulations, drivers should follow the speed indicated by the road speed limit signs.
7
2
Share

What Are the Causes of Car Scratches?

The causes of car scratches are: 1. Improper scrubbing during car washing may lead to scratches; 2. Excessive or mishandled polishing can cause scratches; 3. Scratches can occur when the car comes into contact with other vehicles, hard objects, roadside branches, or sand and stones while driving at high speeds. Methods to repair car door scratches include: 1. For hairline scratches, simply use polishing or apply a grinding compound to remove them; 2. For shallow scratches, applying toothpaste to the scratch can be very effective, especially for surface scratches that do not damage the car's primer; 3. For small dents not exceeding 5mm, fill with putty to level the surface, then proceed with touch-up painting. If the scratch exposes bare metal, first clean the surface of rust and welding residue, smooth it out, apply an anti-rust oxidizer, spray primer, and repeat the painting, drying, and polishing process to complete the repair.
10
0
Share

How to Distinguish Run-Flat Tires from Regular Tires?

Methods to distinguish run-flat tires from regular tires are: 1. Check for markings on the appearance: Run-flat tires have run-flat markings, while regular tires have no markings; 2. Press the tire sidewall: Run-flat tires have thick sidewalls, while regular tires have thin sidewalls. The functions of tires are: 1. Transmit driving force, braking force, and steering force to achieve vehicle operation; 2. Support vehicle load; 3. Reduce and absorb vibrations and impacts during driving, avoiding severe vibrations that could damage vehicle components. Tire maintenance methods include: 1. Regularly check tire pressure; 2. Remove debris from tire treads; 3. Inspect tire wear and replace them promptly based on wear conditions; 4. Perform four-wheel rotation—when the vehicle pulls to one side or exhibits abnormal steering, rotate the tires promptly. Four-wheel rotation ensures even force distribution on all tires, preventing excessive wear.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.