What causes slight shaking when the car is idling?

1 Answers
SanArthur
07/30/25 6:35am
The reasons for car body shaking during idling: 1. Severe engine carbon deposits: The most common cause of car shaking is a dirty throttle valve or excessive carbon buildup in the fuel injectors. When the engine's combustible mixture becomes alternately lean and rich, it causes idle shaking after a cold start. 2. Ignition system issues: Check the working condition of the spark plugs, high-voltage wires, and ignition coils. Problems in the ignition system or poor performance of the spark plugs can also lead to such symptoms. 3. Unstable fuel pressure: If you have already cleaned the engine carbon deposits, cleaned the throttle valve, and replaced the spark plugs but still notice body shaking during idling, it is recommended to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can cause body shaking. 4. Aging engine components: Car shaking can also be related to worn engine mounts. Engine mounts are responsible for absorbing minor vibrations during engine operation. If the engine mounts are faulty, these vibrations can be transmitted to the steering wheel and the cabin, causing shaking during idling.
Was this review help?
1
3
Share
More Forum Discussions

How to Connect a Car Horn Relay?

First, disconnect the non-ground wire from the horn and connect it to the terminal labeled 'button' on the relay, leaving the horn's ground wire untouched. Then, use a wire to connect the terminal labeled 'battery' on the relay to the positive terminal of the battery. Next, connect the terminal labeled 'horn' on the relay to another terminal on the horn using another wire, and ground the relay housing. Below is some relevant information about horn relays: 1. A relay is an electrical control device that establishes an interactive relationship between the control system (also known as the input circuit) and the controlled system (also known as the output circuit). It is commonly used in automated control circuits and essentially functions as an 'automatic switch' that uses a small current to control the operation of a larger current. Therefore, it plays roles such as automatic regulation, safety protection, and circuit switching in electrical circuits. 2. A car electric horn produces sound through the vibration of a metal diaphragm. The car electric horn consists of an iron core, a magnetic coil, contacts, an armature, and a diaphragm. When the driver presses the horn switch, current flows through the contacts to the coil, generating a magnetic force that pulls down the armature, forcing the diaphragm to move. The movement of the armature causes the contacts to open, interrupting the current and causing the magnetic force of the coil to disappear. The diaphragm, along with the armature, returns to its original position under its own elasticity and the action of a spring plate, closing the contacts and reconnecting the circuit. Current then flows through the contacts to the coil again, generating magnetic force and repeating the above actions. This cycle repeats, causing the diaphragm to vibrate continuously and produce sound. The resonator, rigidly connected to the diaphragm, ensures smooth vibration and produces a more pleasant sound (based on the principle of electromagnetism).
9
1
Share

How to reset the maintenance light on the new H6?

Here is the method to reset the maintenance light on the Haval H6: 1. Insert the key and keep the engine off. 2. Press the reset button once, and switch and select the system that needs adjustment according to the display. 3. Turn the ignition switch to the second gear and hold the reset button for about 3 seconds. 4. The multifunction display on the instrument panel will show the relevant icon, indicating that the maintenance light has been successfully reset. Here is some related information about the maintenance light: 1. The maintenance light is a device that reminds the owner to perform vehicle maintenance in a timely manner. 2. After performing vehicle maintenance, the maintenance light can be reset to zero, allowing the system to recalculate the next maintenance time or mileage.
3
3
Share

What is the tire model of the Ford Kuga?

The tire model of the Ford Kuga is 235/50R18. The meaning of the tire model 235/50R18 is: 235 represents the tire tread width of 235mm; 50 represents the aspect ratio of 50%; R stands for radial tire; 18 represents the rim diameter of 18 inches. Different brands of cars use different tires. According to structure, tires can be divided into radial tires and bias tires; according to tread patterns, they can be divided into ribbed tires, transverse pattern tires, mixed pattern tires, and off-road pattern tires. The Ford Kuga is a compact SUV under Ford. The vehicle has a length of 4524 mm, width of 1838 mm, height of 1701 mm, and a wheelbase of 2690 mm.
8
3
Share

Why is there a hissing sound when stepping on the brake?

Stepping on the brake and hearing a hissing sound may be due to rust on the brake disc or brake pads. After prolonged parking, especially in humid weather or after rain, a certain amount of rust or dirt can accumulate on the brake disc or brake pads. Driving for a while can usually resolve the issue, or you can apply butter or lubricant to the connection between the brake pads and the brake caliper. The braking system mainly consists of two types: drum brakes and disc brakes. Drum brakes are now commonly used in commercial vehicles, while disc brakes are more prevalent in ordinary small cars. The braking system is directly related to the driving safety of the vehicle and is a high-wear component, so regular maintenance checks and part replacements are necessary. Typically, brake pads should be replaced every 60,000 to 80,000 kilometers, and brake discs should be replaced every 100,000 to 120,000 kilometers.
15
2
Share

How to turn on the air conditioning cold air in Cruze?

Cruze turns on the air conditioning cold air by pressing the AC button, with automatic adjustment of air distribution and fan speed. When the air conditioning compressor is working, it inhales low-temperature and low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. The low-temperature and low-pressure liquid refrigerant absorbs heat from the air inside the car passing through the evaporator, evaporates, and turns into gas. The Chevrolet Cruze has a length, width, and height of 4666mm, 1807mm, and 1460mm respectively, with a wheelbase of 2700mm, and is front-wheel drive. In terms of appearance, this car inherits the family-style large-mouth grille, with angular headlights on the full front that appear very flamboyant. The strongly lined engine hood, combined with the integrated bumper and slightly exaggerated design, makes this car look full of passion and vitality.
8
0
Share

Where is the low-pressure port for the Jaguar XF's air conditioning?

The low-pressure port for the Jaguar XF's air conditioning is located beneath the wiper trim panel. When the air conditioning is operating, the low-pressure side is cool while the high-pressure side is hot. Some pipelines feature quick-connect ports, with the larger one being the high-pressure port and the smaller one the low-pressure port. The Jaguar XF is a mid-to-large-sized luxury sedan, measuring 4961mm in length, 1877mm in width, and 1460mm in height, with a wheelbase of 2909mm. In terms of design, this vehicle leans more towards the XK's car-making philosophy, exuding a modern aesthetic: a bold front grille, sleek body lines, and the iconic leaping jaguar emblem embedded in the center of the grille, all of which highlight the car's extraordinary presence. The interior of this car is exceptionally spacious, comfortably accommodating five adults and delivering a prestigious driving and riding experience.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.