···
Log in / Register

What Causes Severe Vibration in Trucks?

4 Answers
Claire
07/29/25 2:07pm
Severe vibration in trucks can be caused by the following reasons: 1. Severe engine carbon deposits: The most common cause of vehicle vibration is a dirty throttle body or excessive carbon buildup in the fuel injectors. 2. Ignition system issues: One of the reasons for vibration is poor performance of spark plugs, high-voltage wires, or ignition coils. 3. Unstable oil pressure: Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can cause body vibration.
Was this review help?
16
3
Share
ZaneAnn
08/13/25 6:01am
I've been driving trucks for decades, and severe shaking usually has a few common causes. First, improper tire balancing is a major issue, especially noticeable at high speeds; uneven tire wear or significant differences in tire pressure can also cause vibrations. Second, suspension system failures, such as leaking shock absorbers, loose ball joints, or deformed control arms, make the shaking worse on bumpy roads. Third, drivetrain issues like a bent or unbalanced driveshaft can cause more pronounced shaking during acceleration. Fourth, loose wheel bearings can intensify shaking when turning. My advice is to start with the simplest checks: inspect tire pressure and try rotating the tires. If the problem persists, visit a professional shop for a thorough inspection—safety first. Regular maintenance can prevent these issues from arising in the first place.
Was this review help?
9
5
Share
Expand All
FaithRose
10/10/25 7:13am
As a veteran truck driver, I've encountered shaking issues many times. Most often, it's the tires causing trouble: improper wheel balance or uneven tire pressure can make the truck shake violently at high speeds; severe tread wear can also lead to this. Suspension problems are another culprit, such as broken shock absorbers or aged springs, which amplify vibrations when going over bumps. Wheel hub issues are significant too - loose bearings make the truck sway; sometimes it's a problem with the driveshaft, especially causing intense shaking during acceleration. When this happens, I first pull over to check for any wheel abnormalities, and if that doesn't help, I drive slowly to find a repair shop. For prevention, I check tire pressure and inspect the suspension every month.
Was this review help?
3
0
Share
Expand All
VonAngela
11/23/25 8:24am
My small truck always shakes badly during long-distance trips, with three common causes. Poor tire balance or uneven tire pressure is the most frequent issue, especially noticeable at high speeds. Suspension system failures, such as ineffective shock absorbers, can worsen vibrations, while loose wheel bearings also cause wobbling. Additionally, a bent or unstable drive shaft can lead to shaking. Pay attention to wheel conditions during daily driving and perform timely maintenance to prevent problems. If shaking occurs, checking tire pressure and wheel hub safety is advisable.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

What engine does the SWM X3 use?

SWM X3 is equipped with a 1.6L naturally aspirated engine and a 1.5T turbocharged engine. The functions of the engine are: 1. Fully burning the fuel injected into the cylinder to generate power; 2. Determining the vehicle's power performance, fuel economy, stability, and environmental friendliness. The 2020 Value Edition SWM X3 features a MacPherson independent front suspension and a five-link coil spring rear suspension. It is powered by a 1.5L naturally aspirated engine with a maximum horsepower of 112 PS, a maximum power of 82 kW, and a maximum torque of 152 Nm, paired with a 5-speed manual transmission.
2
2
Share

What to Do When ETC Signal is Weak?

The solutions for weak ETC signal are: 1. Reserve a cutout for ETC when installing metal film; 2. Replace with a new ETC device; 3. Change the installation position of the ETC. The installation method of the ETC device is: 1. Purchase the ETC device, check if the equipment is complete, and read the installation manual; 2. Determine the installation direction of the ETC device, with the solar panel facing outward; 3. Peel off the back adhesive of the device, fold the solar panel towards the vehicle's front windshield, and press firmly to ensure secure attachment; 4. Install the device at the center top of the vehicle's front windshield, ensuring it does not obstruct normal driving visibility. It should be adhered in one go and not removed for reattachment; 5. Insert the ETC card to activate the ETC device. Upon hearing a beep from the device and seeing the indicator light turn on, the device is activated, and the installation is complete.
9
4
Share

What are the drawbacks of ECU remapping for engines?

The drawbacks of ECU remapping for engines are: 1. It requires the use of higher-quality fuel, which increases driving costs; 2. If the ECU upgrade is not done properly, it can affect the engine's lifespan, cause the engine warning light to illuminate, and result in unbalanced power output; 3. Some vehicle models may experience excessive power after the upgrade, making the braking system inadequate, potentially leading to longer braking distances and safety concerns; 4. It may void the warranty. The function of an engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by burning it in a sealed cylinder, causing the gas to expand and push the piston to perform work. The components of an engine include: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system.
3
3
Share

Should the engine be warmed up before an oil change?

It is necessary to warm up the engine before changing the oil. The method for warming up is: After starting the vehicle, let it idle for 1 to 2 minutes to allow the engine coolant to reach normal temperature. The steps for changing the oil are: 1. Lift the vehicle, remove the undercover, and place a container beneath the oil drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after the oil has drained and wipe it with a tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and add new oil through the filler port. Precautions for changing the oil include: 1. Perform the oil change while the engine is warm to ensure the old oil is drained as completely as possible; 2. Add the appropriate amount of new oil; 3. After adding the oil, start the engine and check all components for leaks. Let the engine run for 3 minutes to confirm the oil level is at the normal mark.
2
2
Share

Is Skoda a Joint Venture or Domestic Car?

Skoda is a joint venture car. Its body dimensions are: length 4675mm, width 1814mm, height 1460mm, with a wheelbase of 2686mm, fuel tank capacity of 68.5 liters, trunk capacity of 570 liters, and a body weight of 1440kg. The 2019 standard version of Skoda features a MacPherson independent front suspension and a four-link independent rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
5
5
Share

What is the disassembly and installation method for the ŠKODA Superb navigation system?

The disassembly and installation method for the ŠKODA Superb navigation system is as follows: 1. Remove the button panel and air vents on the center console; 2. After removing the panel, unplug the connecting wires, loosen the relevant screws, take out the single-disc CD player, and disconnect the connecting wires to complete the disassembly; 3. Use screws and clips to install the new navigation device in the original center console panel position, remove the packaging from the navigation screen, and eliminate any bubbles on the screen film before completing the installation. The navigation modes include: 1. Path retrieval customization mode; 2. Site setting mode; 3. Map positioning mode. The functions of the navigation system are: 1. Search and processing of map data; 2. Map matching; 3. Route planning; 4. Human-machine interface; 5. Wireless communication.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.