···
Log in / Register

What Causes Severe Vibration During Car Acceleration?

4 Answers
Nancy
08/30/25 5:28am

Possible causes include a dirty throttle body or excessive carbon buildup in the fuel injectors and intake passages. Below are the reasons and solutions for vehicle vibration: 1. Causes of vehicle vibration: When the car engine vibrates abnormally during driving, sometimes accompanied by failure to start, it may be due to a dirty throttle body or excessive carbon deposits in the fuel injectors and intake passages. In cold conditions, carbon deposits can absorb some fuel, and if the fuel doesn't completely enter the cylinder for combustion, it can cause unstable idling and difficulty starting. 2. Solutions: First, visually inspect whether the balancing weights on the wheel rims are missing or if there's any obvious deformation of the wheel hub. If no issues are found, professional testing equipment is needed, as subtle deformations in the tie rods, suspension, or wheel hubs are hard to detect with the naked eye. First, check if the left and right half-shafts are bent. Then, disassemble and inspect the inner walls of the left and right inner CV joints for wear and pitting. In most cases, the problem is caused by damage to the inner CV joint.

Was this review help?
8
3
Share
JaylaRose
09/12/25 2:37am

I've been driving for over a decade and have experienced acceleration shudder issues before. It feels like the car is disco dancing, which is truly uncomfortable. The main cause could be problems with the ignition system, such as worn-out spark plugs or failing ignition coils, leading to uneven engine combustion and severe shaking during acceleration. Another possibility is fuel system issues, like clogged fuel injectors or an underperforming fuel pump. When the engine doesn't get enough fuel, it's like starving, naturally causing violent shaking. Additionally, worn engine mounts that can't absorb vibrations will make the engine wobble, transferring the motion to the entire vehicle. Imbalanced tires or worn wheel bearings might also transmit vibrations to the car body, especially noticeable at high speeds. I recommend paying attention to regular maintenance, such as checking spark plugs every 20,000 kilometers. Don't wait until problems escalate before fixing them, as it compromises driving safety. Safety always comes first.

Was this review help?
14
4
Share
Expand All
Stephen
10/26/25 3:25am

As someone who frequently repairs cars, I've encountered quite a few cases of acceleration shuddering, with the core issues being uneven ignition or unstable fuel supply. During inspections, first use a multimeter to test the spark plugs and coils—replace them if the resistance values are abnormal. For fuel-related aspects, check the injector spray volume and pressure; clean or replace them if clogged. Worn engine mounts can also transmit engine vibrations to the body—you can judge by removing the hood and feeling them. Issues in the air system, such as a dirty throttle body or air leaks, can affect the air-fuel mixture ratio and cause shuddering. Additionally, damaged drive shafts can worsen shuddering during turns. For self-inspection, start with simple steps like replacing a spark plug. If that doesn’t work, take it to a professional shop to read the fault codes with a diagnostic tool—don’t delay and risk damaging more components.

Was this review help?
4
4
Share
Expand All
DiRose
12/09/25 3:45am

As a car enthusiast, acceleration shudder makes me feel like the car is struggling! Possible causes include spark plugs failing to ignite, leading to cylinder misfires, or uneven fuel injection from the injectors causing the engine to starve and shudder. The most common issue is damaged engine mounts, which lose their damping effect when aged, causing the body to wobble. Modified cars may also experience shudder due to improper ECU tuning, affecting performance. Unbalanced tires transmit vibrations to the steering wheel, while damaged drive shafts are more noticeable at high speeds. Solutions include DIY upgrades like replacing spark plugs or cleaning the throttle body, or visiting a tuning shop for ECU optimization. Paying attention to these details can enhance driving pleasure and ensure smooth, effortless acceleration.

Was this review help?
6
1
Share
Expand All
More Forum Discussions

Where to Pay the Fine for Not Wearing a Seat Belt in the Back Seat?

Fines for not wearing a seat belt in the back seat are not paid at the traffic police station but at the bank specified on the penalty notice. You can also pay the fine through online banking or Alipay. Definition of Back Seat Seat Belt: As the name suggests, the back seat seat belt is used by passengers in the back seat. Most people are well aware of the importance of seat belts, but this awareness is usually limited to front seat passengers. In fact, back seat passengers also need to wear seat belts to protect their lives. Function of Seat Belts: Wearing a seat belt can prevent inertial impact. China's "Road Traffic Safety Law" clearly states that drivers and passengers must use seat belts as required when the vehicle is in motion. Traffic police remind the public that when a car collides or brakes suddenly, seat belts can counteract the tremendous inertia, preventing passengers from being thrown off their seats or out of the vehicle. Drivers who frequently transport children should ensure that children sit in the back seat and wear seat belts.
7
3
Share

Can a Full-Size Spare Tire Be Used as a Regular Tire?

Full-size spare tires cannot be used as regular tires. Even if the size is identical, a full-size spare tire can only be used as an emergency tire. Below is relevant information about car spare tires: 1. Concept of Spare Tires: A spare tire refers to a backup tire for a car, with specifications matching those of the original car tires. However, some vehicles use special-colored rim spare tires, compact spare tires, folding spare tires, or run-flat tires to remind owners to promptly inspect and replace faulty tires. 2. Types of Spare Tires: There are three types of spare tires: full-size spare tires, non-full-size spare tires, and run-flat tires. Full-size spare tires have identical specifications to the other four tires on the vehicle and can replace any temporarily or permanently unusable tire. Non-full-size spare tires have slightly smaller diameters and widths compared to the other four tires, making them suitable only for temporary use and exclusively for non-drive wheels. Run-flat tires, also known as safety tires or colloquially as "anti-blowout tires," are directly translated in the industry as "tires that maintain functionality when deflated."
8
0
Share

What car has six squares as its logo?

Six squares represent the logo of Geely Auto, a brand under China's Geely Holding Group. Below is more information about Geely Auto: The Geely logo draws creative inspiration from six-pack abs. The emblem consists of six gemstones: blue gemstones symbolize the azure sky, black gemstones represent the vast earth, and the combination of dual-colored gemstones signifies Geely Auto traversing between heaven and earth. Founded in 1986 and headquartered in Hangzhou, Zhejiang, Geely Auto has established vehicle and powertrain manufacturing bases in Taizhou, Ningbo (Zhejiang), Xiangtan (Hunan), Chengdu (Sichuan), Baoji (Shaanxi), Jinzhong (Shanxi), and overseas factories in countries like Belarus. Geely Auto Research Institute possesses strong R&D capabilities in passenger vehicles, engines, transmissions, and automotive electronics. It offers six engine series including 1.0L 3-cylinder, 1.0L 4-cylinder, 1.3L, 1.5L, 1.6L, and 1.8L, as well as seven transmission series: JLS160, JLS160A, JLS110, JLS90, Z110, Z130, and Z170.
20
0
Share

Does Driving Directly in D Gear with Electronic Handbrake Damage the Car?

Driving directly in D gear with electronic handbrake will not damage the car. Introduction to Electronic Handbrake: The electronic handbrake is a technology that achieves parking brake through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving parking brake control through the friction generated between the brake disc and the brake pads. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button. The electronic handbrake is also known as the electronic parking brake system. The electronic parking brake system integrates the temporary braking function during driving and the long-term braking function after parking, and achieves parking brake through electronic control technology. Advantages of Electronic Handbrake: Very space-saving: It is only the size of a button, and the saved space is naturally converted into storage space and humanized features such as cup holders. Automatic release: Unlike the mechanical handbrake which must be manually lowered/released, most electronic handbrakes automatically release when the driver steps on the accelerator. This is undoubtedly a great boon for those novices who often forget to release the handbrake when driving.
6
3
Share

Where is the automotive three-way catalytic converter located?

The three-way catalytic converter is located on the exhaust manifold, which is the header section of the exhaust pipe. The function of the three-way catalytic converter is to purify exhaust gases, as this component can reduce the content of toxic and harmful substances in vehicle emissions. Three-way catalytic converter failure: It will affect the vehicle's exhaust emissions exceeding standards, which may prevent the vehicle from passing annual inspections smoothly; it is necessary to replace the three-way catalytic converter with a new one immediately, and it is essential to choose an original equipment manufacturer (OEM) product. Working principle: When high-temperature exhaust gases pass through the purification device, the purifying agents in the three-way catalytic converter enhance the activity of three gases: CO, HC, and NOx. Oxygen sensors: The oxygen sensor in front of the three-way catalytic converter is called the front oxygen sensor, while the one behind it is called the rear oxygen sensor. The primary function of the front oxygen sensor is to detect the oxygen content in the exhaust gases and then send the signal back to the ECU. The ECU can adjust the engine's air-fuel ratio based on this data. The main function of the rear oxygen sensor is to check whether the three-way catalytic converter has failed. If the data transmitted by the front and rear oxygen sensors to the ECU are similar, it indicates that the three-way catalytic converter has failed.
6
0
Share

Where can the VIN be found on a vehicle?

Vehicle VIN can usually be seen at the bottom of the front windshield on the driver's side. Here is some information about VIN: 1. Meaning: VIN refers to the Vehicle Identification Number, which is a long string of characters consisting of seventeen digits. 2. Content: It contains information such as the vehicle manufacturer, year, model, body type and code, engine code, and assembly location. 3. Function: Correctly interpreting the VIN is crucial for accurately identifying the vehicle model and conducting proper diagnosis and repairs.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.