···
Log in / Register

What Causes Severe Brake Noise in the New Jetta?

4 Answers
MatthewLynn
09/03/25 2:01am

Here are the reasons for brake noise in the New Jetta: 1. It may be that the mechanic installed the brake pads incorrectly. Upon removal, you can see that only part of the brake pad surface shows signs of friction. In this case, you need to go to a 4S shop to have them removed and reinstalled. 2. If the noise suddenly appears after driving for a while, it is mostly due to hard objects on the road, such as gravel or metal debris, getting caught in the brake pads. In such cases, you can go to a 4S shop for cleaning. 3. Due to manufacturer issues, friction block dimensions may vary for the same type of brake pads, especially in width. Some manufacturers may have deviations of up to three millimeters. This can make the brake disc surface appear smooth, but if larger brake pads are installed on a brake disc that was previously used with smaller pads, noise can occur. In such cases, the brake disc may need resurfacing. Alternatively, you can drive for a while without resurfacing, and the noise will stop once the friction marks align.

Was this review help?
6
3
Share
LeHope
09/15/25 3:49am

I've handled quite a few cases of brake noise in the new Jetta, mainly caused by severely worn brake pads or material issues. Sometimes, the factory-installed brake pads on new cars are too hard, and they haven't adapted well during the break-in period, resulting in squeaky noises while driving. Another common cause is uneven or rusted brake disc surfaces, especially noticeable after rain, which creates noise during friction. Dust accumulation in the brake system also adds to the problem, as more dust over time can lead to noise. I recommend checking if the brake pad thickness is normal using a ruler; if they're too thin, they should be replaced, and you should also inspect the brake discs for any scratches. Safety should never be taken lightly—brake noise could indicate reduced braking performance, which is even more dangerous at high speeds. It's best to have it checked by a professional shop as soon as possible. Regular cleaning of brake components can also help prevent this issue.

Was this review help?
13
5
Share
Expand All
AlanaAnn
10/29/25 4:29am

When I drove the new Jetta before, I encountered brake noise. At first, I thought it was a minor issue, but later discovered it was caused by metal particles in the brake pads, which made a screeching sound when rubbing against the brake disc, especially noticeable in cold weather. Sometimes, the brake discs of new cars aren't smooth enough, or they aren't installed properly, causing more noise and vibration during hard braking. Dust clogged in the brake caliper gaps is also a common cause. Once, after cleaning with compressed air, the noise immediately stopped. I suggest you try pressing the brakes hard a few times to heat up the system and see if it helps reduce the noise. If not, go to a repair shop for inspection as soon as possible to avoid damaging other components. Driving safety is more important than anything else, so it's better to address this issue early for peace of mind.

Was this review help?
15
2
Share
Expand All
GriffinAnn
12/12/25 4:41am

Brake noise may be caused by excessive wear of brake pads or deformation of brake discs. The factory brake pads of the new Jetta are sometimes made of harder materials, and if not properly broken in during the initial period, they can easily produce noise. Excessive dust accumulation or foreign objects stuck in the brakes can also increase noise. The inspection is simple: listen to the location of the sound to determine whether it's a front or rear wheel issue; noise at low speeds is mostly due to aging brake pads. It is recommended not to ignore this and to repair it early to prevent brake failure.

Was this review help?
1
5
Share
Expand All
More Forum Discussions

Will driving below the minimum speed on the highway result in a fine?

On highways, the minimum speed must not be less than 60 km/h. Driving below the prescribed minimum speed on the highway will result in a deduction of 3 points and a warning or fine. According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": Article 78: Highways shall indicate the speed limits for each lane. The maximum speed shall not exceed 120 km/h, and the minimum speed shall not be less than 60 km/h. Maximum speed: On highways, the maximum speed for small passenger vehicles shall not exceed 120 km/h, for other motor vehicles shall not exceed 100 km/h, and for motorcycles shall not exceed 80 km/h. If there are two lanes in the same direction, the minimum speed for the left lane shall be 100 km/h; if there are three or more lanes in the same direction, the minimum speed for the leftmost lane shall be 110 km/h, and for the middle lane shall be 90 km/h. If the speed limit indicated by road signs differs from the above lane speed regulations, drivers shall follow the speed limit indicated by the road signs.
18
5
Share

What happens if a new car exceeds 3,000 kilometers without maintenance?

Exceeding 3,000 kilometers without maintenance for a new car won't cause any major issues. Manufacturers typically recommend the first service at 5,000 kilometers. Vehicle maintenance cycle: The maintenance cycle is preset when the vehicle leaves the factory, so a "wrench" symbol will periodically appear after certain mileage to remind the driver for timely service. Generally, the maintenance interval is every 5,000-8,000 kilometers driven, with the factory setting usually exceeding 8,000 kilometers. Routine maintenance items: Engine oil maintenance: Engine oil, also called lubricant, reduces engine wear while providing cooling and lubrication. There are three types of engine oil: Full synthetic oil: Replacement recommended every 10,000-12,000 kilometers. For seldom-driven vehicles, the oil may emulsify and lose effectiveness, requiring annual replacement. Semi-synthetic oil: Replacement recommended every 8,000-10,000 kilometers. Mineral oil: Requires replacement approximately every 5,000 kilometers.
7
2
Share

What Does It Mean When the Throttle Light Comes On?

When the throttle light comes on, it indicates a fault in the engine management system or electronic control. Here is an introduction to the throttle: 1. Introduction: The throttle is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to generate power. 2. Maintenance Methods: (1) Release Gas: Engine oil tends to volatilize under heat during use. The longer the usage time and the higher the temperature, the stronger the volatilization. Additionally, some compressed gas from the cylinder will inevitably squeeze into the crankcase through the gaps in the piston rings. Therefore, there must be a channel to release the gas; otherwise, the oil pan will develop positive pressure. (2) Negative Pressure Extraction: One reason the crankcase ventilation tube is connected to the throttle is to meet environmental requirements, and another is to use the intake's negative pressure to extract gas from the crankcase. (3) Cleaning Frequency: How quickly the throttle gets dirty depends on factors such as engine operating temperature and driving habits.
13
1
Share

Why is there no air in the 1-3 gears of the car air conditioner but air in the 4th gear?

If there is no air in the 1-3 gears of the car air conditioner but air in the 4th gear, it could be due to a faulty blower resistor. Below is an introduction to car air conditioners: 1. Air Conditioner Layout: Different types of air conditioning systems have different layout methods. Currently, most cars use an integrated heating and cooling air conditioning system. The layout involves assembling components such as the evaporator, heater core, centrifugal blower, and control mechanisms together, known as the air conditioner assembly. 2. Air Conditioner Components: Modern air conditioning systems consist of a refrigeration system, heating system, ventilation and air purification devices, and a control system. A car air conditioner generally includes components such as the compressor, electronically controlled clutch, condenser, evaporator, expansion valve, receiver-drier, piping, condenser fan, vacuum solenoid valve, idle speed controller, and control system. The car air conditioner is divided into high-pressure and low-pressure lines. The high-pressure side includes the compressor output side, high-pressure lines, condenser, receiver-drier, and liquid lines; the low-pressure side includes the evaporator, accumulator, return lines, compressor input side, and compressor oil sump.
12
1
Share

Can I Just Replace One Rear Shock Absorber If It's Broken?

It is generally recommended to replace both rear shock absorbers in pairs for small cars. If only one is replaced, the damping force will differ between the two sides, which may cause uneven vehicle height during braking. Replacing both simultaneously can resolve the issue of uneven wobbling. Today, we'll discuss the symptoms when one shock absorber fails, why it's necessary to replace them in pairs, and the pros and cons of air suspension systems. Follow along if you're interested - we hope this proves helpful. Everyone knows the function of shock absorbers. A good shock absorber provides excellent driving comfort. As long as the vehicle is moving, the shock absorbers are constantly at work, bearing most of the vehicle's weight. Therefore, their service life isn't as long as other components. If shock absorbers develop issues, they typically don't pose safety risks unless driving on mountain roads. However, they can cause minor inconveniences - most notably reduced ride comfort, increased noise, and potentially even causing driver motion sickness.
15
0
Share

Reasons Why a Motorcycle Won't Start, the Horn Doesn't Work, and the Headlight Doesn't Light Up?

It is likely a battery issue. Check whether the two main battery cables are loose or oxidized, and then check if the battery is severely depleted. The battery uses lead plates filled with sponge-like lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and 22–28% dilute sulfuric acid as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When the battery discharges, metallic lead acts as the negative electrode, undergoing oxidation and converting into lead sulfate; lead dioxide acts as the positive electrode, undergoing reduction and converting into lead sulfate. When the battery is charged with direct current, lead and lead dioxide are generated at the two electrodes, respectively. After disconnecting the power source, it returns to its pre-discharge state, forming a chemical battery. A lead-acid battery is a rechargeable battery, also known as a secondary battery. Its voltage is 2V, and typically three lead-acid batteries are connected in series to achieve 6V. Automobiles use six lead-acid batteries connected in series to form a 12V battery pack. Ordinary lead-acid batteries require periodic replenishment of distilled water to maintain the electrolyte as 22–28% dilute sulfuric acid after some use.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.