What causes several warning lights to suddenly illuminate in a Honda XR-V?

1 Answers
RyderAnn
07/24/25 3:53am
Here are the reasons why several warning lights suddenly illuminate in a Honda XR-V: 1. CAN bus failure in the ECU, or poor contact in the ECU's CAN interface. 2. Excessive dirt and carbon deposits, causing abnormal air circulation, which prevents accurate control of normal air intake, leading to unstable gas content and poor engine performance. 3. Low fuel pressure combined with poor constant pressure performance results in low system atomization levels, making the car difficult to start. Below are the types of indicator lights on the dashboard: 1. First category: Daily indicator lights, such as turn signal lights, light indicators, seat belt indicators, cruise control indicators, parking indicators, etc., all fall into this category. They only serve to indicate the working status of various vehicle functions. 2. Second category: Warning indicator lights, such as the fuel level indicator and windshield washer fluid level indicator. 3. Third category: Fault indicator lights, including the engine (exhaust system) fault light, oil system fault light, battery and power generation system fault light, etc. These fault indicator lights rarely illuminate under normal circumstances.
Was this review help?
1
4
Share
More Forum Discussions

How to Replace the Car Key Battery for Lamando?

First, pop out the metal mechanical key from the car key. There is a small groove near the key hook. Use a flat-head screwdriver to gently pry the back side to create a gap, then slowly separate it with your fingernail to open the key. Once the key is opened, replace the battery. Pay attention to the polarity when installing the battery (positive side down, negative side up). Below is an introduction to the Lamando: 1. In terms of appearance, the Lamando has only minor changes compared to the concept version, maintaining a very sporty design. The front face features a family-style design, with a three-bar grille connected to the headlights and round fog lights positioned on either side of the bumper. 2. For the interior, the Lamando also adopts Volkswagen's latest design style. The steering wheel features a new three-spoke multifunctional design, and the instrument cluster follows a dual-dial style with a 3.5-inch color screen in the center. Additionally, the dashboard layout is very tidy, with a 6.5-inch LCD display in the center, the air control area at the bottom, and two polygonal air vents above.
2
5
Share

What causes the daytime running lights of the Camry to not work?

The reasons why the Camry's daytime running lights are not working are: 1. The daytime running lights are turned off in the vehicle settings; 2. The fuse for the daytime running lights is blown; 3. Wiring harness failure; 4. Fault in the light guide ring driver; 5. Issue with the daytime running light bulb; 6. Failure in the headlight control module driver. The Camry's body dimensions are: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, fuel tank capacity 60l, and trunk capacity 593l. The Camry is equipped with a 2.0l naturally aspirated engine, with a maximum power of 131kw, reaching maximum power at 6600rpm, paired with a 10-speed continuously variable transmission.
14
3
Share

What level of car is the Cruze?

The Cruze is a compact car. Here is more information about the Cruze: 1. The Cruze is equipped with two engines, one is a 1.0-liter turbocharged engine, and the other is a 1.3-liter turbocharged engine. Both the 1.0-liter and 1.3-liter turbocharged engines are three-cylinder engines. 2. The 1.0-liter turbocharged engine has a maximum power of 92kw, a maximum torque of 170 Nm, a maximum power speed of 5600 rpm, and a maximum torque speed of 2000 to 4000 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a 6-speed dual-clutch transmission. 3. The 1.3-liter turbocharged engine has a maximum power of 120kw, a maximum torque of 230 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed of 1800 to 4400 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission. 4. The front suspension of this car uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
7
4
Share

What are the steps to replace the key battery of the Emgrand GL?

The steps to replace the key battery of the Emgrand GL are: 1. Press the mechanical lock button on the side of the key and pull out the mechanical key; 2. Check the internal structure of the key, and you will find a relatively narrow gap; 3. Insert a small flat-head screwdriver or a sharp tool and twist it open; 4. Once the key is slightly opened, use a tool or your fingers to pry it apart; 5. Remove the old battery and replace it with a new one to complete the process. The body dimensions of the Emgrand GL are: length 4725mm, width 1802mm, height 1478mm, wheelbase 2700mm, and fuel tank capacity 55l.
3
5
Share

How to Check Tire Pressure on Volkswagen Lavida?

Volkswagen Lavida features an automatic tire pressure monitoring system that alerts the driver when abnormal tire pressure is detected. The system continuously monitors tire pressure in real-time while driving, providing warnings for both air leakage and low pressure to ensure driving safety. The Volkswagen Lavida is a compact sedan under SAIC Volkswagen, with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, a wheelbase of 2688mm, and a fuel tank capacity of 51 liters. It is equipped with a 1.4T turbocharged engine delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
20
0
Share

What is the Difference Between Forged Wheels and Cast Wheels?

The difference between forged wheels and cast wheels lies in their production and processing methods: Forged wheels are made by placing heated and softened aluminum blocks into steel molds and forming them through stamping. After cooling, they undergo mechanical processing to complete the manufacturing. Cast wheels, on the other hand, are produced by pouring molten aluminum into sand molds. Once cooled and formed, they also undergo mechanical processing. Forging is a processing method that uses forging machinery to apply pressure to metal billets, causing plastic deformation to obtain forgings with specific mechanical properties, shapes, and sizes. Cast wheels are the cylindrical metal components inside the tire that support the tire and are mounted on the axle.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.