What Causes Scratches on the Car Hood?

1 Answers
Braxton
07/29/25 7:28pm
Scratches on the car hood can occur due to the following reasons: 1. Scratches on the hood may be caused by debris such as stones hitting the surface at high speeds, or by branches brushing against it. 2. The car's paint surface can develop numerous scratches, most of which are typically on the clear coat layer. These scratches can also easily occur during car washing. Here is a brief introduction to the layers of car paint: 1. The car's paint surface consists of four layers, from the inside out: the electrocoat layer, the primer layer, the base coat (color layer), and the clear coat. 2. After the car body is assembled, it is immersed in an electrocoating bath to form the electrocoat layer on the surface.
Was this review help?
7
2
Share
More Forum Discussions

What is the speed range for gears 1 to 4?

First gear is the starting speed, typically ranging from 0-5 km/h. Second gear corresponds to speeds between 5-20 km/h. Third gear operates within 20-40 km/h. Fourth gear is designed for speeds of 40-60 km/h. Below is relevant information about gear shifting: 1. Concept: Gear shifting is the abbreviation for "gear lever operation method." It refers to the driver's psychological and physiological movements that adjust the gear lever position according to road conditions and vehicle speed changes. Generally, the term "gear lever operation method" specifically refers to the gear lever itself. 2. Technical requirements: The technical requirements for gear shifting can be summarized in eight words: timely, correct, smooth, and swift. Timely means selecting the appropriate moment to shift gears—neither upshifting too early nor downshifting too late. Correct refers to the proper and coordinated use of the clutch pedal, accelerator pedal, and gear lever, with precise positioning. Smooth: After engaging a new gear, the clutch pedal should be released promptly and smoothly. Swift: The action should be quick to minimize shifting time, reduce kinetic energy loss, and decrease fuel consumption.
15
3
Share

What is the problem when the car body shakes at idle speed without any fault code?

Reasons for car body shaking at idle speed without fault codes: 1. Severe burning of the distributor cap contacts: If the contacts of the ignition system's distributor cap are severely burned, it will cause spark jumping, mostly occurring between the corresponding posts on the cap, resulting in severe idle speed fluctuations and significant power loss. 2. Faulty ignition coil: This can also lead to cylinder misfire, and often it is the ignition coil problem that causes severe burning of the distributor cap. After the ignition coil fails, it is also most likely to cause severe power loss and sudden engine stalling. 3. Cylinder wire wear: This can also cause engine misfire. To check whether the cylinder wire is working properly, simply pull out the cylinder wire, plug it into the spark plug, and start the engine to observe. 4. Ignition system problem: Sometimes, ignition system issues can also cause the electrode discharge part of the spark plug to become rounded due to burning after working for a period, making the spark jump position not in the spark plug gap or the spark plug not firing at all, which directly leads to the cylinder not working.
4
1
Share

What are the ACC and constant power in the Envision?

Detailed introduction is as follows: 1. Constant power: Constant power refers to the positive power supply connected from the positive terminal of the battery, which is not controlled by any switch or relay. This means that as long as the battery has power and the fuse is not blown, there will be power. 2. ACC: The ACC state refers to the switch state of the ignition key. Extended information: 1. Gear introduction: Generally, car keys have 4 positions, one is "OFF", one is "ACC", another is "ON", and the last one is the start position. However, most Volkswagen models (such as Hongqi, Audi, etc.) have only 3 positions, meaning there is no "ACC". (1) The OFF position means "off". (2) The ACC position means "power can be supplied to some electrical devices in the car without starting the engine". (3) The ON position means "power can be supplied to all electrical devices in the car". (4) The start position is an automatically resetting switch; after starting the engine, it automatically returns to the "ON" position.
20
5
Share

Where is the best place to install a phone holder in the Envision?

Envision phone holders can be installed on the dashboard, air vents, and front windshield. The specific reasons are as follows: 1. Dashboard: Many people prefer to install car phone holders here, but it may sometimes obstruct the view. 2. Air vents: Placing a phone holder on the air vents generally requires the vent blades to be horizontal. However, some models have vertical or circular vent blades, which are not suitable for air vent phone holders. 3. Front windshield: Portable navigation devices are often installed here. Simply use a strong suction cup base car phone holder to attach it, and it can be removed and stored in the glove box when not in use.
6
3
Share

What is the reason for the car air pump not starting when powered on?

Check the USB port and wiring of the car air pump for any damage. Below is an introduction to car air pumps: 1. Definition: A car air pump, also known as an inflator or air compressor, operates through the functioning of an internal motor. Principle: When the motor runs, during suction, the valve of the connector is pushed open by atmospheric pressure, allowing gas to enter the cylinder. When inflating a tire, the valve is closed by the pressure inside the cylinder, directing the gas into the tire. This essentially uses the principle of atmospheric pressure to inflate cars, balls, and rubber boats. 2. Precautions: These portable car air pumps are generally only suitable for small cars and should not be used for large buses or trucks to avoid insufficient pressure, which could lead to danger.
4
0
Share

What are the driving test items?

Although the specific rules for obtaining a driver's license vary across different regions in China, most areas require candidates to pass four subjects, which are divided into theoretical and practical parts. These include Subject 1, Subject 2, Subject 3, and Subject 4. Upon passing all subjects, the driver's license can be obtained. Below is a detailed introduction to the test content for each subject: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge (written test). Conducted on a computer, the test is scored out of 100, with a passing score of 90 or above (inclusive). 2. Subject 2: Field driving skills test. Conducted in a real vehicle within a designated area, the test is simply marked as pass or fail. The test includes five mandatory items performed in sequence: reversing into a parking space, parallel parking, S-curve driving, right-angle turning, and starting and stopping on a slope. The test is scored out of 100, with a passing score of 80 or above (inclusive). 3. Subject 3: Road driving skills test. Conducted on actual roads or simulated environments in a real vehicle, the test is scored out of 100. The passing scores are 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: Safe and civilized driving knowledge (written test). The test is scored out of 100, with a passing score of 90 or above (inclusive).
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.