···
Log in / Register

What Causes Rust Under Car Seats?

5 Answers
VonCora
07/24/25 7:43pm

Automotive material application: Due to factors such as price and brand positioning constraints, vehicles may not utilize high-quality sheet metal materials, which is the primary cause of rust. Rust environment: It depends on the dryness or humidity of the environment where the carbon steel is stored. If the storage environment is relatively dry, rust will be less severe. If the storage environment is more humid, rust will be more pronounced. Rust removal methods: Directly polish the affected area and choose some high-quality rust-proof and waterproof coatings for repair. Regular maintenance requires frequent inspections. When performing rust prevention work on the car, it is best to use the same type of paint for rust inhibitors.

Was this review help?
7
1
Share
DiDonovan
08/10/25 9:05am

A few days ago I also noticed rust under the car seat, which was quite annoying. The main issue is the high humidity inside the car. Living by the seaside, salt easily gets into the undercarriage, and when it rains if I forget to close the windows, water seeps in and accumulates under the seats. Over time, when the carpet gets wet, the metal parts oxidize. Also, improper car washing where foam isn't rinsed off completely leaves residual moisture that causes corrosion. Parking on damp ground exposes the chassis to moisture, leading to rust spots spreading. Need to address this quickly - clean and dry with rust-proof spray, and next time park in a dry spot to avoid water accumulation in hidden areas.

Was this review help?
3
1
Share
Expand All
JakeLee
08/10/25 9:06am

As someone who regularly maintains cars, I've noticed that seat rust is often caused by environmental factors. Moisture seeps in through air conditioning ducts or door gaps, accumulating under the seats where it's hard to evaporate, especially in older cars with poor sealing. Metal components like seat brackets lack anti-rust coatings, and sweat or spilled water left on the carpet accelerates corrosion. I've also observed that cars in coastal areas are more severely affected by salt spray, with frequent interior dampness and salt directly oxidizing iron parts. When repairing, it's essential to first dry the area, sand the rust spots, and apply anti-rust paint for protection. Regularly check the dryness of the carpet and minimize the source of moisture entering the vehicle.

Was this review help?
2
2
Share
Expand All
OPeyton
09/26/25 4:10am

I just started driving when I encountered rust under the seat, and it turns out moisture is the main culprit. Rainwater leaking in or leaving windows open causes water to accumulate in the corners of the seat, leading to gradual metal oxidation. Not drying the carpet properly after washing the car leaves residual moisture, which also corrodes components. In winter, road salt brought into the car combines with moisture to cause rapid rusting. When cleaning, I noticed rust spots mainly on the seat brackets and mounting holes. Now, I make sure to thoroughly dry under the seats after every car wash—prevention is better than cure.

Was this review help?
16
5
Share
Expand All
McAustin
11/09/25 6:14am

To prevent seat rust, I focus on meticulous maintenance. Moisture, accumulated water, or salt in enclosed spaces accelerates metal corrosion, commonly occurring after rainwater leakage or air conditioning condensation is not promptly cleaned. Rust spots typically appear on exposed areas like seat mounting screws or chassis brackets, necessitating checks for moisture retention under the carpet. Preventative measures include ensuring good interior ventilation, parking in dry areas, regularly lifting seats to remove dust and moisture, and keeping windows and doors tightly closed during rain. Addressing issues early can save the hassle of major repairs.

Was this review help?
9
5
Share
Expand All
More Forum Discussions

Where is the fuse box of the new Santana located?

The fuse box of the new Santana is located on the left side of the center console, inside the cover above the driver's footwell. A fuse box is a container for fuses, which can be categorized into fuse tube boxes and fuse strip boxes. Taking the 2021 Santana as an example, its body dimensions are: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, fuel tank capacity 52.8 liters, and trunk capacity 466 liters. The 2021 Santana is equipped with a 1.5L naturally aspirated engine, with a maximum power of 82kW and maximum torque of 145Nm, paired with a 5-speed manual transmission.
14
2
Share

Where is the air conditioning filter located in the Venucia T70?

Venucia T70's air conditioning filter is located beside the left leg of the front passenger seat. The air conditioning filter is an important component in the car's air conditioning system and requires regular replacement. Most vehicles need to replace it every 10,000 kilometers. The Venucia T70 is the first SUV meticulously crafted by the Dongfeng Venucia brand. It measures 4542mm in length, 1786mm in width, and 1642mm in height, with a wheelbase of 2630mm, and features a front-engine, front-wheel-drive layout. In terms of configuration, the Venucia T70 is equipped with an efficient electronic power steering system, offering reliable and comfortable driving control. It also boasts exclusive smart features in its class, such as a 3D panoramic monitoring imaging system and speed-sensitive volume adjustment.
14
1
Share

What Are the Reasons Why a Car Door Won't Open?

Reasons why a car door won't open: 1. The door lock cable is malfunctioning and needs to be replaced; 2. The child lock is engaged. When closing the door, check if the child lock is disengaged. If the door won't open, use a flathead screwdriver to turn the child lock to the disengaged position; 3. The door hinge or lock pillar is deformed. After the door is subjected to a certain amount of external force, the hinge and lock pillar may become deformed. In this case, the door and hinge need to be dismantled together and replaced with new ones; 4. The door limiter is malfunctioning and needs to be replaced with a new one.
10
0
Share

Is Benda a Domestic or Imported Brand?

Benda is a domestic brand. About Benda: Benda is affiliated with "Zhejiang Changling Benjian Motorcycle Co., Ltd.", which currently owns three motorcycle brands: "Lifang", "Fada", and "Benda". Its predecessor was "Zhejiang Zhongnan Group Motorcycle Co., Ltd.", a motorcycle company integrating production and sales, and one of Zhejiang's four long-established backbone motorcycle enterprises. Benda Design: Power Configuration: Equipped with a twin-cylinder water-cooled engine; Brand Introduction: Belongs to Changling Benjian Motorcycle Co., Ltd.; Exterior Design: Adopts Benda's consistent design style, with a compact overall appearance.
7
0
Share

Why does the wiper keep wiping automatically?

The reasons why the wiper keeps wiping automatically are: 1. The wiper fuse is blown; 2. The wiper motor is burned out; 3. The wiper switch is faulty; 4. The wiper blade is damaged; 5. The wiper linkage is broken; 6. The wiper circuit is faulty. The functions of the wiper are: 1. To remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility; 2. To use the wiper to determine the position of the wheels. The maintenance methods for the wiper are: 1. Clean the water on the wiper and windshield in time after washing the car; 2. Regularly check whether the wiper has cracks or damage; 3. Place the wiper upright when parking outdoors for a long time.
4
0
Share

What are the causes of car shaking while driving?

Car shaking while driving can be caused by: 1. Ignition system issues, such as incorrect spark plug gap, excessive carbon buildup on spark plugs, or damaged ignition coils; 2. Excessive carbon deposits on the engine, throttle valve, and fuel injectors are a major cause of engine shaking. Since carbon deposits absorb gasoline, excessive deposits can be drawn into the cylinders for combustion, leading to inconsistent air-fuel mixture concentrations in the cylinders, which is particularly noticeable during cold starts; 3. The engine operates within a specific temperature range. If the coolant temperature is too high, it can cause premature ignition timing, altered air-fuel mixture ratios, thinning of engine oil viscosity, and reduced lubrication performance. Common causes include insufficient coolant, a stuck thermostat, non-functioning fan, or inaccurate temperature control switch settings, all of which can lead to shaking.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.