···
Log in / Register

What causes rear wheel shaking when turning in a Honda CR-V with four-wheel drive?

1 Answers
ClaraLee
09/01/25 3:52am
Fault reasons: 1. Lock-up torque converter: Rear wheel shaking is caused by slipping during the lock-up process of the transmission torque converter, decreased performance of the lock-up clutch friction material, or reduced friction coefficient of the lock-up friction plates. 2. Transmission oxidation: The fault typically occurs around 100,000 kilometers, and vehicles that haven't undergone transmission oil change maintenance may experience this issue earlier. Oxidized and deteriorated transmission oil accelerates wear of friction materials and reduces the friction coefficient. 3. Mountainous terrain: Under driving conditions with many mountainous slopes, the shaking fault may appear earlier, as harsh driving conditions accelerate wear of the torque converter lock-up clutch.
Was this review help?
19
5
Share
More Forum Discussions

What are the safety precautions for driving in summer rain?

Safety precautions for driving in summer rain include: 1. Maintain good visibility and drive cautiously, turn on the windshield wipers in time, and turn on the low beam headlights and fog lights when the weather is dim; 2. Hold the steering wheel with both hands in balance, maintain straight and low-speed driving, and gently apply the brakes when turning to prevent tire lock-up and vehicle skidding; 3. When the vehicle passes through roads with accumulated water or under overpasses, deep trenches, tunnels, etc., where there is flooding, stop to check the depth of the water; 4. Because pedestrians with umbrellas and cyclists wearing raincoats have limited visibility, hearing, and reaction, drivers should slow down and patiently yield, choose a safe place to stop, and not compete with pedestrians and bicycles.
20
3
Share

What is the length of the GL8?

The length of the GL8 is 5256mm, with a width and height of 1878mm and 1776mm respectively. It has a wheelbase of 3088mm, front track of 1602mm, rear track of 1605mm, fuel tank capacity of 66 liters, luggage compartment volume of 475 liters, and a curb weight of 1880kg. Taking the 2021 Buick GL8 as an example, it features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237PS, maximum torque of 350Nm, and maximum power of 174kW. The engine is paired with a 9-speed automatic transmission.
18
3
Share

What are the methods for dealing with scratches on rearview mirrors?

Methods for dealing with scratches on car rearview mirrors are as follows: 1. Use toothpaste to rub the mirror: The abrasive components in toothpaste can sometimes remove scratches. Use traditional toothpaste instead of gel toothpaste. 2. Apply jewelry polish (cerium oxide): This ingredient can effectively restore the mirror's shine. Mix it with water and apply it to the mirror. 3. Use nail polish to cover the scratches: Apply a layer of nail polish, wipe off the excess, and check if the scratches are less noticeable. If the scratches are still visible, repeat the process. 4. Use mustard/vinegar paste: Mix dry mustard with white vinegar and apply it to the rearview mirror, then scrub.
9
3
Share

What are the differences between driven wheels and driving wheels?

Driven wheels and driving wheels differ in the following aspects: 1. Different functions: The driving wheel converts the engine's energy into kinetic energy, propels the driving wheel to rotate, enabling the vehicle to move forward or backward, while also outputting power and torque; The passive wheel has no power and serves a supporting role. Its rotation is driven by an external force, hence it is called passive or driven. 2. Different characteristics: The power source of the driving wheel is the engine, which transforms the engine's energy into kinetic energy to drive the driving wheel's rotation; The passive wheel: The driven wheel's power source is the driving wheel, rotating as the driving wheel turns. The main function of the driven wheel is to support the vehicle's weight. The ground friction force borne by the driven wheel acts as resistance, with its direction opposite to that of the wheel's rolling.
12
0
Share

Will Black Paint Transfer to a White Car in a Minor Collision?

Black paint can transfer to a white car in a minor collision. Below are specific details about touch-up paint: 1. Minor paint damage: Slight scratches on a car are unavoidable, as even flying stones on the road can cause them. This type of minor scratch may leave a mark, but wiping it with a wet towel a couple of times might remove it. If the scratch isn't very noticeable, simply applying wax is sufficient—even non-abrasive gloss wax works well. 2. Slightly more severe paint damage: After wiping with a wet towel, noticeable scratches may remain that cannot be washed off with water. In this case, waxing is recommended. Options include water wax or soft wax with abrasives, available in both solid and liquid forms. Alternatively, a touch-up paint pen can be used. 3. Moderate paint damage: Professional repair at a maintenance shop is necessary to prevent damage to the primer.
13
2
Share

Why is there still airflow when the recirculation mode is on?

This situation is quite normal because the recirculation mode cannot completely isolate external air. Recirculation mode: Recirculation mode refers to the closed-loop circulation of interior cabin air, while fresh air mode involves air exchange between the interior and exterior. Use recirculation mode in congested traffic or poor air quality environments. On highways, you should switch to fresh air mode approximately every hour to renew the cabin air and prevent oxygen deprivation. Function of recirculation mode: It allows interior air to circulate in a closed system; the cabin air is reheated or recooled before being redistributed. Generally, whether using heating or cooling, you should first activate recirculation mode. However, prolonged use of recirculation mode will lead to increased carbon dioxide levels from passenger exhalation despite temperature regulation. Therefore, switch to fresh air mode every hour to ventilate the cabin.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.