What Causes Rear Wheel Brake Noise?

2 Answers
VanCharlie
07/29/25 2:01am
Rear wheel brake noise can be attributed to the following reasons: 1. Reason one: When the car's brake pads are severely worn, metal friction noise usually occurs, and the sound can be quite harsh. If this is accompanied by reduced braking effectiveness, then the noise is likely related to this issue. 2. Reason two: The noise could also be caused by incorrect installation of the brake system. If this is the case, it is necessary to seek professional inspection and repair promptly. More details about the brake system are as follows: 1. Detail one: The brake system is crucial for overall driving safety. Once the brake system malfunctions, the consequences can be unpredictable. Within the entire brake system, brake pads play a pivotal role, so timely replacement of brake pads is essential for the safety of the driver. 2. Detail two: Generally, when a car's total mileage reaches 30,000-40,000 kilometers, the brake pads need to be replaced. When the mileage reaches 70,000 kilometers, the car's brake discs should be replaced.
Was this review help?
12
5
Share
ElizaRose
08/12/25 6:02am
I've encountered the issue of rear brake squealing several times while driving, which is actually quite common. The first time it happened, I thought it was due to the road surface, but then the noise became more frequent, especially when braking, producing that sharp screeching sound. I asked an experienced driver about it, and he told me the possible causes could be multifaceted: the most common one is uneven or excessively worn brake pads, which cause the metal to scrape against the disk and make noise; or it could be due to dust or small stones stuck between the brake pads and disk, especially after driving on muddy roads in rainy weather, which can lead to debris buildup; another possibility is rust or deformation of the brake disk itself, causing an uneven surface that results in noise when friction occurs. Additionally, loose brake calipers or insufficient brake fluid could also trigger this sound. I think the most important thing is not to ignore it—once you notice it, you should address it promptly. In my case, I drove to a repair shop, replaced the brake pads, and cleaned the system, and the noise was significantly reduced. Regularly checking the rear brake components during maintenance can effectively prevent this issue—after all, safety comes first.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What Causes the Jerking Sensation When Accelerating Suddenly?

The causes of jerking sensation when accelerating suddenly are: 1. Excessive carbon deposits on the throttle body, fuel injectors, and intake manifold; 2. Poor fuel quality leading to incomplete combustion; 3. Faulty spark plugs or ignition coils causing cylinder misfires; 4. Temporary mismatch between engine torque and transmission oil pressure. Solutions for the jerking sensation during sudden acceleration include: 1. Cleaning carbon deposits from the throttle body, fuel injectors, and intake pipes; 2. Using qualified fuel; 3. Replacing spark plugs and ignition coils; 4. Changing transmission fluid. The function of the accelerator pedal is: By controlling the pedal pressure, it regulates the throttle opening to control air intake while the ECU manages fuel injection, thereby controlling engine speed.
13
2
Share

What is the fuel consumption of a 1.5T engine idling with AC on for one hour?

There is no fixed data standard for the energy consumption of air conditioning. Turning on the AC will increase energy consumption by approximately 20%. A 1.5L displacement vehicle consumes about 2.0 liters of fuel per hour when idling in park. With a 20% increase, this would be around 2.4 liters per hour. Of course, this value may vary depending on the vehicle's condition. Here are some additional details: 1. Definition of idling: Idling refers to the operation of the engine without any load, only overcoming the internal friction resistance of its components, without outputting power externally. The minimum speed required to maintain stable engine operation is called idling speed, which is one of the five basic operating conditions of an engine. 2. Idling while driving: When the car is in gear without pressing the accelerator pedal or when the accelerator pedal is released during driving, maintaining the minimum throttle opening, the engine speed matches the parked idling speed. This state is referred to as driving idling.
4
3
Share

Why can't the fuel tank cap of the Tiguan L open?

The reasons why the fuel tank cap of the Tiguan L cannot open include the fuel tank cap being stuck or rusted, the fuel tank cap pull wire being too long, the fuel tank cap pull wire falling off, the fuel tank cap spring losing elasticity, or the fuel tank cap engagement area aging. Taking the 2021 Tiguan L as an example, it is a mid-size SUV with body dimensions of 4712mm in length, 1839mm in width, and 1673mm in height, a wheelbase of 2791mm, a fuel tank capacity of 60 liters, and a curb weight of 1650kg. The 2021 Tiguan L is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 186PS, a maximum power of 137kW, a maximum torque of 320Nm, and is paired with a 7-speed dual-clutch transmission.
17
1
Share

What are the differences between Mercedes-Benz A-Class, B-Class, and C-Class?

The differences between Mercedes-Benz A-Class, B-Class, and C-Class are: 1. Different engine displacements: The displacement of A-Class cars generally ranges from 1.0L to 1.4L, B-Class cars range from 1.4L to 2.5L, and C-Class cars have engine displacements from 2.0L to 3.5L. 2. Different wheelbases: The wheelbase of A-Class cars is between 2.3 meters and 2.45 meters, B-Class cars generally have a wheelbase of 2.6 meters to 2.85 meters, and C-Class cars have a wheelbase of approximately 2.8 meters to 3 meters. Taking the 2021 Mercedes-Benz C200 as an example, its body dimensions are: length 4784mm, width 1810mm, height 1457mm, with a wheelbase of 2920mm and a fuel tank capacity of 66L.
7
5
Share

What are the differences between the Trumpchi M6 and Trumpchi M8?

The differences between the Trumpchi M6 and Trumpchi M8 lie in their power: the Trumpchi M6 has a maximum horsepower of 156ps, a maximum power of 124kw, and a maximum torque of 265nm; the Trumpchi M8 has a maximum horsepower of 252ps, a maximum power of 185kw, and a maximum torque of 390nm. The body dimensions of the Trumpchi M6 are: length 4780mm, width 1830mm, height 1730mm, wheelbase 2810mm, fuel tank capacity 52l, and trunk capacity 324l. The body dimensions of the Trumpchi M8 are: length 5089mm, width 1884mm, height 1822mm, wheelbase 3000mm, and fuel tank capacity 65l.
18
0
Share

What are the domestic motorcycle brands?

The current top ten motorcycle sales companies in the domestic motorcycle market are Dayang, Loncin, Lifan, Yinxiang, Sundiro-Honda, Wuyang-Honda, Zongshen, North Enterprise, Guangzhou Dayun, and Qianjiang. Here is some extended information: Loncin: The only BMW OEM factory in Asia, but its own brand, Loncin motorcycles, also has good quality, with a significant focus on exports, often ranking at the top or being the export champion. Haojue: The motorcycles have good hardness in the frame steel, excellent engine manufacturing processes, and offer great stability and handling during rides, making them durable. They provide excellent value for money. CFMoto: A brand that has been rising in recent years, offering small-displacement motorcycles like the 125cc six-speed Papio, ST Papio, 150NK, and the recently showcased 250NK (currently highly anticipated in the market but not officially released yet). For large-displacement motorcycles, there are the 400NK, 650NK, 650TR-G (civilian version of the national escort model), and 650MT. CFMoto motorcycles are known for their cool and stylish designs.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.