···
Log in / Register

What Causes Poor Acceleration and High Fuel Consumption in Cars?

1 Answers
FaithFitz
08/26/25 3:02am

Poor acceleration and high fuel consumption in cars can be caused by issues such as malfunctioning ignition systems, fuel system failures, or clogged catalytic converters. Below are detailed explanations: Malfunctioning Ignition System: For example, aging ignition coils or spark plugs that haven't been replaced for a long time can lead to insufficient ignition energy, poor combustion, weak engine acceleration, and the illumination of the engine warning light. Replacing ignition system components can resolve the issue. Fuel System Failure: Fuel system failures can result in low pressure and insufficient fuel injection, leading to weak engine acceleration. It is necessary to inspect and replace the fuel filter and fuel pump. Clogged Catalytic Converter: If the vehicle uses low-quality fuel, it can affect the lifespan of the exhaust system's catalytic converter. Once the catalytic converter becomes clogged, the car will experience poor acceleration and increased fuel consumption. Checking whether the catalytic converter is functioning properly and cleaning it can restore normal operation.

Was this review help?
18
1
Share
More Forum Discussions

Which country is the MG car brand from?

MG is a British brand, and its models include: MG5, MG6, MG ZS, MG HS, MG Pilot New Energy, etc. Taking the 2020 MG6 as an example, it belongs to the compact car category, with body dimensions of: length 4704mm, width 1848mm, height 1466mm, wheelbase of 2715mm, fuel tank capacity of 50L, and curb weight of 1300kg. The 2020 MG6 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 181PS, maximum power of 133kW, maximum torque of 285Nm, paired with a 6-speed manual transmission.
2
0
Share

What kind of cars can be purchased with a C5 driver's license?

C5 driver's license is only applicable to automatic transmission small cars, and the vehicles need to be modified and equipped with some auxiliary facilities. The C5 driver's license is intended for passenger vehicles and does not permit driving commercial vehicles. Important notes for C5 disabled driver's license: Medical certificate: Disabled individuals holding a C5 driver's license must submit a physical medical certificate to the vehicle management department every three years. The renewal process is the same as for the C1 car license. Automotive service institutions: Friends with a C5 driver's license need to choose small automatic transmission cars when purchasing a vehicle. Additionally, they must go to locally designated automotive service institutions for vehicle modification and safety inspections. For specific details, please consult the local vehicle management office.
8
3
Share

What are the motorcycle starting techniques?

When starting, the movements of the left and right hands should be coordinated. As the left hand gradually releases the clutch lever, the right hand should simultaneously increase the throttle appropriately. The proper coordination of throttle control can be judged by listening to the engine sound for appropriate operation. More details are as follows: Scenario 1: If the engine roars loudly when releasing the clutch while increasing the throttle, it indicates excessive throttle opening, and the throttle should be reduced. Scenario 2: When the engine stalls momentarily and increasing the throttle is already too late, you can decisively disengage the clutch and prepare for restarting.
20
5
Share

Is It Normal for a Car's Four Tires to Have Different Production Dates?

It is normal for a car's four tires to have different production dates, but the production year of all four tires should be the same, and the week numbers should not differ by more than one week. The method to check the tire production date is: 1. Locate a set of four numbers on the tire sidewall; 2. The first two digits represent the week of the year the tire was produced; 3. The last two digits represent the year of production. Tire maintenance methods include: 1. Regularly clean out stones stuck in the tire treads; 2. Minimize exposure to direct sunlight; 3. Regularly check tire pressure; 4. Pay attention to suspension maintenance; 5. Periodically inspect front wheel alignment; 6. Be mindful of driving habits—choose smooth road surfaces, avoid objects that could puncture or scratch the tires, and steer clear of chemical spills that may corrode the tires.
7
3
Share

Do 4S shops charge for four-wheel alignment?

4S shops do not offer free four-wheel alignment services; additional charges apply. Below is some information about four-wheel alignment: Introduction: Four-wheel alignment for cars involves adjusting the suspension parameters. Consequences of Fault: If the wheels show signs of deviation, a four-wheel alignment is necessary. Otherwise, it can hinder turning while driving, posing a significant safety hazard. Methods of Determination: The first method is to drive on a relatively straight road with the steering wheel aligned. If the vehicle drifts, it indicates the need for a four-wheel alignment. The second method is to check if the wear on all four tires is even. Especially for the front tires, if one side is significantly more worn than the other, a four-wheel alignment is required.
2
3
Share

What does the 1gn1t1on car fault code mean?

1gn1t1on car fault code means the ignition is on and will disappear after starting. Related information about car fault codes is as follows: Introduction: Car fault codes are the codes reflected by the car's computer ECU after analyzing the fault when the car malfunctions. Generally, fault codes are caused by sensor malfunctions or poor sensor performance, but some mechanical faults cannot be read by the ECU. When a car engine malfunctions, the diagnostic computer will display the fault code after detection. Through this code, maintenance personnel can accurately locate the faulty part and then proceed with repairs. Classification: Car fault codes can be divided into two types: one is intermittent faults. The other is actual faults. Usually, intermittent faults will be cleared if they do not reappear, but actual faults must be repaired before they can be cleared.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.