What Causes One Side of Car Air Vents to Blow Cold Air While the Other Side Blows Hot Air?

1 Answers
AmeliaAnn
07/29/25 6:27pm
The reasons for one side of car air vents blowing cold air while the other side blows hot air are as follows: Insufficient refrigerant: A common cause of temperature differences between the two sides of the air vents is insufficient refrigerant. When refrigerant is insufficient, the evaporation and heat absorption process of the liquid refrigerant entering the evaporator ends quickly, causing the evaporator to absorb heat and cool on the side where the refrigerant flows in, while there is no heat absorption on the side where the refrigerant flows out. As a result, only a small portion of the airflow sent by the blower is cooled, leading to temperature differences between the air from the two vents. By measuring the pressure in the high and low-pressure lines of the air conditioning system, you can determine if there is a refrigerant shortage, and adding refrigerant can resolve the issue. Low efficiency of the air conditioning compressor: If the air conditioning compressor is malfunctioning and operating at low efficiency, the liquefaction of the refrigerant will be insufficient. In this state, the refrigerant entering the evaporator will also have severely reduced heat absorption efficiency, leading to poor cooling performance, ultimately resulting in the airflow temperature from the vents failing to meet standards. Dirty condenser and evaporator: If the car air conditioning system is not cleaned for a long time, the condenser and evaporator can become covered with dust, lint, and other debris, weakening the refrigerant's effectiveness or reducing the heat absorption efficiency during the refrigerant's state changes. This prevents the air from being adequately cooled, ultimately causing temperature differences in the airflow from the various air vents.
Was this review help?
19
0
Share
More Forum Discussions

What brand of tires does the Haval F7x come with?

The Haval F7x is equipped with Goodyear EfficientGrip series tires. Tires are circular elastic rubber products installed on various vehicles or machinery, typically mounted on metal rims. They support the vehicle body, absorb external shocks, ensure contact with the road surface, and guarantee driving performance. The Haval F7x is a coupe SUV from the Haval F series, featuring an intelligent real-time four-wheel drive system with six driving modes: standard, sport, mud, sand, snow, and ECO economy. The full LED rear combination headlights echo the front lights, while the tank-track-style lower protective plates at the front and rear highlight the off-road elements of this urban SUV, enhancing its overall cohesive design.
19
5
Share

How often should OEM wiper blades be replaced?

OEM wiper blades are generally replaced every 1 to 2 years. If the wipers fail to clean properly or produce abnormal noises, replacement is recommended. For wipers that don't clean effectively, fine sandpaper can be used to resurface them. If cleaning performance remains unsatisfactory, this indicates either severe wear or that the blades have reached their service life, and they should be replaced promptly. Wiper blades, also known as windscreen wipers or windshield wipers, are devices designed to remove rain and debris from a vehicle's windshield, thereby improving driver visibility and enhancing road safety. Rear windows of hatchbacks and SUVs are also equipped with wipers. Beyond automobiles, other transportation vehicles such as trains and trams are also fitted with wiper systems.
13
1
Share

Will speeding on the highway be captured by cameras?

Speeding will be captured by cameras. Article 78 of the Regulations states that highways should indicate the speed limits for each lane. The maximum speed must not exceed 120 km/h, and the minimum speed must not be lower than 60 km/h. On highways, the maximum speed for small passenger vehicles must not exceed 120 km/h, while other motor vehicles must not exceed 100 km/h, and motorcycles must not exceed 80 km/h. The penalties and demerit points for speeding on highways for ordinary vehicles are as follows: 1. Speeding within 10% of the speed limit will not be penalized for now; 2. Speeding over 10% but under 20% of the speed limit will result in a fine of 50 RMB and 3 demerit points; 3. Speeding over 20% but under 30% of the speed limit will result in a fine of 50 RMB and 6 demerit points; 4. Speeding over 30% but under 50% of the speed limit will result in a fine of 200 RMB and 6 demerit points; 5. Speeding over 50% but under 70% of the speed limit will result in a fine of 1,000 RMB and 12 demerit points, and may also lead to the revocation of the driver's license; 6. Speeding over 70% of the speed limit will result in a fine of 2,000 RMB and 12 demerit points, and may also lead to the revocation of the driver's license. On roads with a speed limit below 60 km/h, speeding under 50% will result in a warning.
13
1
Share

Is the motor of the Mercedes-Benz C260 covered by a lifetime warranty?

The motor of the Mercedes-Benz C260 is not covered by a lifetime warranty. Its warranty period is calculated together with the vehicle's overall warranty, which is three years. Taking the Mercedes-Benz C-Class 2021 C260 Star Edition as an example, its body dimensions are 4704mm in length, 1810mm in width, and 1454mm in height, with a wheelbase of 2840mm. The Mercedes-Benz C260 is equipped with a 1.5T turbocharged engine, paired with a 9-speed automatic transmission, delivering a maximum horsepower of 184PS, a maximum power of 135kW, and a maximum torque of 280Nm. Both its front and rear suspension types are multi-link independent suspensions, and the drive mode is rear-wheel drive.
19
5
Share

How to repair the issue of unable to pull out the key in Park (P) position on Buick Excelle?

The solution for the issue of unable to pull out the key in Park (P) position on Buick Excelle is: 1. First check whether there is any fault in the gear lock circuit of the car; 2. Turn the key, step on the brake, and shift to P position, then the key can be pulled out. When there is a problem with the gear signal, the computer does not receive the P position signal, so the key cannot be pulled out from the keyhole. Taking the 2021 Buick Excelle Facelift 1.5L Automatic Entry-Level model as an example, the car has a length of 4609mm, width of 1798mm, height of 1464mm, and wheelbase of 2640mm. The manufacturer of this car is SAIC-GM Buick, classified as a compact car, with naturally aspirated intake form, maximum horsepower of 113ps, and maximum torque of 141nm.
14
5
Share

Is it necessary to repair a slightly deformed wheel hub?

It is necessary to repair a slightly deformed wheel hub. The repair methods are as follows: 1. First, pad the dented area with a sponge or cloth, then use a hammer to forcefully flatten the dented part; 2. After smoothing out the uneven areas, sand the inside of the wheel hub with sandpaper; 3. Since the original wheel hub is made of aluminum alloy with its natural color, which cannot be replicated by any paint, the entire hub must be repainted. Use an automotive spray paint that closely matches the original color of the wheel hub to repaint the entire inside, then let the paint dry. The wheel hub is a cylindrical metal component that supports the tire and is mounted on the axle, also known as the rim or steel wheel. Depending on the characteristics and requirements of different vehicle models, the surface treatment process of the wheel hub may vary, generally categorized into painting and plating.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.