What Causes One Side of a Car Sunroof to Be Higher Than the Other?

2 Answers
Khloe
09/03/25 6:24am
One side of a car sunroof being higher than the other is due to a malfunction in the guide rails. Below are the benefits of having a sunroof in a car: 1. Spacious interior: Cars with sunroofs (especially panoramic sunroofs) make the rear seats feel brighter and less oppressive. 2. Interior ventilation: For those who smoke or frequently drive long distances, a sunroof provides excellent ventilation, allowing smoke to dissipate through it. 3. Emergency escape route: For safety reasons, if a car accidentally submerges in water and the doors are difficult to open, the sunroof can serve as an escape route.
Was this review help?
19
4
Share
AdalynnLee
09/15/25 7:49am
I've driven several cars, and this issue with the sunroof isn't the first time I've encountered it. The most common reason for one side being higher than the other is dust accumulation or small stones stuck in the tracks, causing the sunroof to tilt when sliding. Alternatively, the transmission gears may have aged unevenly, with one side rotating slower. Improper installation, such as loose screws or misaligned positioning, can also lead to imbalance. In short, don't overlook this problem—it's best to clean the tracks or lubricate the parts as soon as you notice any signs. Otherwise, if it doesn't close properly, heavy rain could cause leaks, leading to a messy puddle inside the car and potential damage to the interior. Developing a habit of cleaning the sunroof tracks during regular car washes is a good preventive measure.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

Why is the fuel consumption of new cars so high?

The reasons for high fuel consumption in new cars are as follows: 1. The break-in period: During this phase, various parts of the car need to adjust and work together. Many mechanical components require mutual adaptation while driving. The friction between parts during the break-in period is relatively high, requiring more power, which in turn consumes more fuel. Therefore, fuel consumption is significantly higher during the break-in period and gradually decreases afterward. 2. Poor driving habits: Although fuel consumption is naturally high during the break-in period, incorrect driving techniques can further increase fuel usage. 3. External factors: Apart from the car's own component systems, certain external factors related to vehicle performance can also affect fuel consumption. For example, encountering traffic congestion during a trip leads to frequent starting and braking, which wastes fuel and results in higher fuel consumption.
9
2
Share

Where is the best place to put a car fire extinguisher?

Car fire extinguishers should be placed near the driver's seat in a location that is easy to access, such as under the driver's or passenger's seat. If the extinguisher is placed in the trunk, rescue time will be delayed. It is recommended to equip yourself with a 3kg to 5kg ABC dry powder fire extinguisher or a water foam fire extinguisher, as these types are effective against fires involving solids, liquids, gases, and electrical equipment. Here is how to use a fire extinguisher: 1. Bring the fire extinguisher near the fire location and stand upwind of the fire. 2. Pull out the safety pin. 3. Hold the nozzle with one hand and grip the handle with the other. 4. Aim the nozzle at the base of the flames and sweep.
11
3
Share

Is There a Problem with Adding the Wrong Color of Antifreeze?

Adding the wrong color of antifreeze can cause problems. The reasons are as follows: 1. Antifreeze of different colors has different compositions. Mixing different colors of antifreeze can lead to chemical reactions, and in severe cases, the antifreeze may become ineffective. 2. If you want to switch to a different color of antifreeze, you need to completely drain the existing antifreeze, clean the car's cooling system, and then add the new antifreeze. 3. Additional information: Antifreeze is a liquid composed of antifreeze additives, additives to prevent metal corrosion, and water. It has properties such as antifreeze capability, anti-corrosion, heat conduction, and non-deterioration.
8
1
Share

How to Open the Engine Oil Cap?

Most car engine compartment covers are similar in how they open. Generally, there is an interior release lever located below the dashboard, opposite the driver's left leg. Pulling this lever unlocks the engine compartment cover. Alternatively, you can pull a small handle extending from the grille or reach into the popped edge of the engine compartment cover to release the latch and open it. Here are the steps to open a car's engine cover: 1. First, locate the engine hood release lever under the left side of the driver's seat. 2. Then, lift the engine hood release lever upward. You will hear a 'pop' sound, indicating that the engine hood latch has been released. 3. At this point, step out of the car and check—you will notice a clear gap at the front of the engine cover. 4. Finally, fully lift the engine hood and secure it with the support rod to complete the process.
20
0
Share

What are the symptoms when starting a car with cylinder scoring?

Starting a car with cylinder scoring will exhibit the following symptoms: 1. Significant decrease in engine power, resulting in poor vehicle acceleration. 2. Engine overheating, triggering the coolant temperature warning light, and may even experience boiling over. 3. The engine malfunction indicator light comes on, accompanied by blue smoke from the exhaust pipe. 4. Additional information: Generally, a car with cylinder scoring won't start. If it does start, it might indicate minor scoring or scoring in just one cylinder. If the engine starts despite cylinder scoring, it will experience shaking, trigger the malfunction indicator light, emit blue or black smoke from the exhaust, and show a noticeable drop in power.
8
1
Share

What Causes Lack of Power in an Automatic Transmission Car When Going Uphill?

Automatic transmission cars may experience a lack of power when going uphill due to the following reasons: 1. The gear is too high; shift to a lower gear when climbing. 2. The idle speed is too low or unstable. A low or unstable idle speed can also result in insufficient power when climbing. This issue can stem from various causes, including problems with the idle speed motor or wiring. It may also be due to other engine-related issues leading to unstable idle speed, such as sensor malfunctions, engine combustion problems, or air intake leaks. 3. Automatic transmission slippage. Causes of this fault include low hydraulic fluid levels; excessive wear or burning of clutch plates, brake pads, or brake bands; excessive wear of the oil pump or main oil line leaks; slippage of the one-way overrunning clutch; or damaged piston seals in the clutch or brake, leading to oil leaks. 4. The car's inherent power performance issues.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.