···
Log in / Register

What Causes Odors Inside a Car?

1 Answers
MacMila
07/29/25 10:17am
Reasons for odors inside a car include interior accessories and the car itself emitting odors, damp air conditioning, and decaying matter in hard-to-reach areas. Below are detailed explanations and solutions: Interior Accessories and the Car Itself: Nowadays, cars go straight from the production line to the market, with harmful gases from various accessories and materials not yet fully released. This directly leads to air pollution inside the car. Additionally, interior decoration materials can also contribute to air pollution. Most consumers decorate their cars after purchase, and materials like floor mats, seat covers, and adhesives release harmful gases such as formaldehyde, benzene, and TVOC, inevitably causing air pollution inside the car. Placing air fresheners can help mitigate this. Damp Air Conditioning: Condensation and dust from the air accumulate on the surface of the evaporator, creating a damp and dark environment within the air conditioning system, which becomes a breeding ground for mold. Over time, turning on the AC will release a continuous stream of musty odors. To prevent this, it's essential to avoid dampness and mold in the AC system. Additionally, when conditions permit, frequently opening windows for ventilation or using the external air circulation mode in areas with cleaner air can effectively maintain fresh air inside the car. Decaying Matter in Hard-to-Reach Areas: In summer, acidic foods spoil quickly. Fruit peels or sweets accidentally dropped in corners of the car can easily rot and mold. Spilled drinks or seats and carpets dampened by rain leaks also encourage mold growth. Shoes left unused in the trunk for a long time or clothes forgotten to be washed after use can emit unpleasant odors. Cleaning hard-to-reach areas inside the car is necessary.
Was this review help?
18
4
Share
More Forum Discussions

From Which Side Should the Number of Engine Cylinders Be Counted?

Engine cylinders are counted starting from the pulley side. Common cylinder counts for automotive engines include 3, 4, 5, 6, 8, 10, and 12 cylinders. With the same cylinder bore diameter, more cylinders result in larger displacement and higher power output. For the same displacement, more cylinders mean smaller bore diameters, allowing for higher rotational speeds and consequently greater power enhancement. Below is relevant information about engines: 1. Introduction: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (such as Stirling engines and steam engines), jet engines, electric motors, etc. 2. Application Scope: Engines can refer to both power generation devices and the entire machinery including power units (e.g., gasoline engines, aircraft engines). The engine was first developed in the UK, so the concept of the engine originates from English, with its original meaning referring to "mechanical devices that generate power."
7
0
Share

Why Does Foton Daimler Use the Mercedes-Benz Logo?

Foton Daimler uses the Mercedes-Benz logo because it is a commercial vehicle jointly produced by Daimler and a Chinese automaker. Currently, Beijing Foton Daimler Automotive Co., Ltd. has added the Actros truck production line to its manufacturing facilities, which was originally used to produce the Auman truck, the sole truck brand of the joint venture. Here is some additional information about Foton Daimler: 1. Development Plan: Foton Daimler Automotive's Auman brand products will be equipped with the Mercedes-Benz OM457 heavy-duty engine. At the same time, Daimler will provide technical and expert support to help the joint venture improve product quality and assist in the development of new products tailored to the domestic market. This will enhance the competitiveness of Auman heavy-duty trucks in China and emerging markets, enabling both parties to achieve complementary benefits and profit-sharing in domestic and international markets. 2. Auman: Launched in 2002, "Auman" is a high-safety, high-quality product brand manufactured by Foton Daimler Automotive. It has long been committed to providing comprehensive solutions for third-party logistics.
8
1
Share

What Causes the Timing Chain Noise in Passat Engines?

Timing chain noise may be caused by lack of tension in the chain tensioner, chain elongation, abnormal wear of the guide chain plate, or abnormal timing sprockets. Causes of noise: To prevent excessive clearance caused by chain wear, the system is equipped with an automatic chain tensioner. This tensioner operates based on engine oil pressure. If there are issues with the lubrication system, abnormal oil pressure may lead to excessive chain clearance, resulting in noise, especially during idle. When this problem occurs, immediate inspection and repair are necessary to prevent chain skipping and engine damage. Solutions: To prevent excessive clearance due to chain wear, the system uses an automatic chain tensioner that relies on oil pressure. When the lubrication system malfunctions, abnormal oil pressure can cause excessive chain clearance and noise. Timely inspection and repair are required to prevent excessive clearance, chain skipping, and potential engine damage.
1
4
Share

Do You Need to Press the Brake When Starting the Engine?

For automatic transmission models, it is necessary to press the brake when starting the engine. Below are specific braking techniques: 1. Parking: When you need to stop the vehicle during normal driving, press the brake once, release it, and then press it again. Repeat this process to bring the car to a gradual and stable stop. 2. During braking: Avoid slamming on the brakes suddenly, as this can cause the driver and passengers to lurch forward. Always leave some room for adjustment. 3. Rough roads: When stopping on rough or uneven roads, avoid pressing the brake too hard. These roads often have loose gravel or stones, and sudden braking can cause the tires to skid. 4. Long downhill sections: Use engine braking to assist in slowing down the vehicle. Avoid heavy braking and instead use intermittent braking (pumping the brakes) to achieve a smooth deceleration.
6
4
Share

What is the process for obtaining temporary license plates for a new car?

For new cars, temporary license plates can be directly processed by the 4S store staff. Since the comprehensive implementation of the 'simplification of administration and decentralization' policy, there is no longer a need to go to the vehicle management office to apply for temporary plates when buying a car. The procedures can be completed directly at the 4S store, and temporary license plates can be obtained, with minimal personal involvement in the process. Here is additional information: 1. Validity Period: Temporary license plates have three validity periods depending on the type: 15 days, 30 days, and 90 days. For temporary driving within the administrative jurisdiction, a temporary license plate with a validity period of no more than 15 days is issued; for temporary driving across administrative jurisdictions, a temporary license plate with a validity period of no more than 30 days is issued. For vehicles undergoing research, type testing, etc., a temporary license plate with a validity period of 90 days is issued. 2. Driving Range: Generally, temporary license plates can be used on highways, but there are certain restrictions. There are two types of temporary license plates: one is only for driving within the city (blue background with black characters and black borders), and the other is for driving nationwide (brown-yellow background with black characters and black borders).
12
2
Share

Why Does the Transfer Case Make Abnormal Noises?

Abnormal noises from the transfer case could be caused by the aging of "transfer case oil." The primary functions of the oil are lubrication and heat dissipation. Prolonged use can lead to a decline in oil performance and an increase in impurities, resulting in jerking and abnormal noises. Below is relevant information about the transfer case: 1. Introduction: The transfer case is a device that distributes the engine's power, directing it to the rear axle or simultaneously to both the front and rear axles. 2. Development Trends: The transfer case is essentially a component in four-wheel-drive vehicles. With advancements in four-wheel-drive technology, the transfer case has continuously evolved, forming distinct styles to match different four-wheel-drive vehicle requirements. Their basic principles and functions also vary significantly.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.