What Causes Noticeable Jerking at Speeds Between 55 and 60?

2 Answers
MacJessica
09/01/25 5:32am
The following are reasons for jerking sensations during vehicle operation: 1. Excessive carbon deposits: Heavy accumulation in the throttle body, fuel injectors, or intake ducts. 2. Poor combustion: Jerking during driving is mostly caused by inefficient fuel combustion within the engine. 3. Generally categorized into jerking caused by engine faults: Transmission gearshift jerking, which could also result from excessive clearance in engine mounts, drive shafts, or suspension systems. 4. Jerking during acceleration due to transmission gearshifts: Most common in AT or dual-clutch models. Slight jerking during gear changes is unavoidable, but becoming familiar with the vehicle's shift points and easing off the accelerator slightly in advance can make the jerking sensation less noticeable.
Was this review help?
13
4
Share
DiDylan
09/13/25 8:12am
When driving an automatic transmission car, I often notice a jerking sensation at speeds between 55 to 60 kilometers per hour, as if the car is hesitating to shift gears. This is usually because the automatic transmission is switching gears at that speed point. If the transmission fluid is too dirty or insufficient, the gear shifts become less smooth. Sometimes, aging spark plugs can also cause slight engine vibrations, which transmit to the wheels and feel like jerking. My car had this issue before, and changing the transmission fluid once improved it significantly. Additionally, if there's a problem with the fuel system, such as clogged fuel injectors, it can cause similar symptoms. It's recommended to regularly check the transmission fluid level and the condition of the spark plugs. Don't overlook small details—safety first.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

Is 10L/100km Considered High Fuel Consumption?

Whether 10L/100km is considered high fuel consumption depends on the situation. For a compact family car with a small-displacement naturally aspirated engine, this fuel consumption would be considered high. However, for a mid-to-large-sized SUV equipped with a large-displacement naturally aspirated or turbocharged engine, this fuel consumption would not be considered high. There are three methods to reduce a vehicle's fuel consumption: 1. Minimize the vehicle's weight: Keep the interior as simple as possible and avoid carrying unnecessary items, as every additional kilogram increases fuel consumption by 1%; 2. Avoid excessive modifications: Adding spoilers, protective covers, or wings can disrupt the original aerodynamic design, increasing wind resistance and consuming extra fuel. Modifying lighting systems can increase electrical load and lead to unnecessary fuel consumption; 3. Develop good driving habits: Avoid sudden acceleration, driving at high speeds in low gears, prolonged idling, frequent lane changes, or braking. Aim for smooth starts, steady-speed driving, and reduced braking.
9
3
Share

What does 101y tire mean?

101y tire refers to the tire load capacity and speed rating parameters. Below is relevant information about automotive tires: 1. Introduction: A tire is a circular elastic rubber product mounted on metal rims that rolls on the ground and is assembled on various vehicles or machinery. It supports the vehicle body, cushions external impacts, achieves contact with the road surface, and ensures the vehicle's driving performance. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high/low-temperature effects during operation. Therefore, they must possess high load-bearing performance, traction performance, and cushioning performance. 2. Basic functions: Tires are one of the most important components of a vehicle. Their main functions include supporting the entire weight of the vehicle and bearing the vehicle's load; transmitting traction and braking torque to ensure adhesion between the wheels and the road surface; reducing and absorbing vibrations and impacts during driving to prevent severe vibrations and early damage to vehicle components; adapting to the vehicle's high-speed performance while reducing driving noise; and ensuring driving safety, handling stability, comfort, and energy efficiency.
3
3
Share

How Long Can the Oxygen in a Car Last for One Person?

In a car, the oxygen can last for about ten hours for one person. Below is a detailed introduction: 1. Introduction One: A normal adult (weighing approximately 60 kg) breathes about 15~20 times per minute at rest, with each breath involving about 250 milliliters of air. Body weight and activity level can affect the volume of air per breath. 2. Introduction Two: Generally, the interior volume of a car is about 3 cubic meters (3000 liters). Based on the normal oxygen content in air, 3000 liters of air contain approximately 630 liters of oxygen. Under safe conditions, the actual usable oxygen for normal breathing in the car is only 150 liters. If an adult breathes 20 times per minute, they consume 250 milliliters (0.25 liters) of oxygen per minute.
18
1
Share

Several Possible Causes of Oil Leakage from the Car Chassis

Several possible causes of oil leakage from the car chassis are as follows: 1. Shock absorber oil leakage: Generally, shock absorber oil leakage is easy to detect and usually has no repair value, so direct replacement is recommended. 2. Brake master cylinder, wheel cylinder, or ABS pump oil leakage: When removing or installing oil pipe screws, it is best to use a dedicated oil pipe wrench and tighten them according to the standard torque. 3. Clutch master cylinder or wheel cylinder oil leakage: The clutch master cylinder and wheel cylinder are similar in appearance to the brake master cylinder, but there is only one outgoing oil pipe. They are usually replaced due to piston oil leakage. 4. Half-shaft oil seal leakage. 5. Rear differential oil seal leakage. 6. Transmission oil pan leakage.
11
0
Share

Where does water leakage in a car usually come from?

Water leakage in a car usually comes from the sunroof, or due to poor sealing of the door seals, causing water to enter during car washes or rain. Sunroof leakage generally occurs in two situations: one is when small sand particles or dust clog the sunroof drainage channel, and the other is when the sunroof sealing strip shifts or "lifts up." Below is some relevant information about sealing strips: 1. Introduction: A sealing strip is a product designed to seal something, making it difficult to open, and serves functions such as shock absorption, waterproofing, sound insulation, heat insulation, dust prevention, and fixation. Sealing strips can be made of various materials, including rubber, paper, metal, and plastic. 2. Classification of sealing strips: Sealing strips can be classified based on cross-sectional shape, vulcanization method, application area and purpose, and material used.
2
1
Share

What does a butterfly appearing on the car indicate?

A butterfly appearing on the car indicates the air filter warning light. Below is a detailed introduction about it: 1. Introduction one: When the car's mileage reaches the specified interval for air filter maintenance, or when the air filter clogging warning light comes on (regardless of the mileage), the air filter must be cleaned. 2. Introduction two: Most new-generation vehicle engines are equipped with an air filter indicator to ensure timely maintenance of the air filter. Although the display methods of various air filter indicators may differ slightly, their basic structure and maintenance methods are largely similar.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.