What Causes Misalignment in Car Display Touchscreens?

What does 'auto' mean for car lights?

AUTO stands for automatic, meaning automatic on and off. After rotating the light switch to this position, for example, when passing through tunnels, on cloudy days, or in any dimly lit areas, the car lights will automatically turn on. When the lighting conditions become sufficient, the lights will subsequently turn off. Additional information: 1. When the light dims while driving, the headlights will automatically turn on, and when the light brightens, they will automatically turn off. It's worth mentioning that many people mistakenly believe that 'automatic headlights' are specifically designed for tunnels, which is not the case. The activation of automatic headlights has a delay—the headlights will only turn on automatically within a few seconds after the light sensor detects dimming. According to traffic regulations, car headlights must be turned on before entering a tunnel, so manual activation is still required when passing through tunnels. 2. Sensors such as photoresistors (installed behind the rearview mirror, etc.) send electronic signals to the ECU (Electronic Control Unit, similar to a computer CPU) to inform it whether to turn the headlights on or off, or to switch between high and low beams. The ECU controls the headlight switch and beam changes. Thus, when driving in environments where the light suddenly dims, the headlights will automatically turn on and will turn off when the light is sufficient. Additionally, they may automatically switch between high and low beams during nighttime encounters with other vehicles.

4

1

Share

Where to Set Up BMW Rearview Camera?

BMW rearview camera setup steps are as follows: 1. Locate the factory settings menu in the central control display. 2. Click to enter the setup password and select OK. 3. Set the radar display menu to ON, then the rearview camera will display bright auxiliary lines, and you can also adjust the brightness of the rearview image. Below is an introduction to the rearview camera: 1. The rearview camera uses a far-infrared wide-angle camera device installed at the rear of the vehicle, allowing clear visibility of obstacles behind the car through the in-car display. When the reverse gear is engaged, the system automatically activates the high-definition rearview camera at the rear, displaying a clear view of the rear situation on the LCD screen, helping the driver accurately assess the road conditions behind. 2. The rearview camera provides a panoramic view of the area behind the vehicle on the in-car screen while reversing, enabling better control of the vehicle's path and preventing collisions with objects. 3. Nowadays, rearview cameras are no longer exclusive to mid-to-high-end cars; some compact cars and microvans are also equipped with rearview camera systems, allowing more commercial users to experience the convenience brought by technological features when parking.

16

3

Share

Where is the fuel tank cap opened on the Avancier?

The fuel tank cap of the Avancier can be opened simply by pressing it when the car is unlocked, and it will pop open. The Avancier not only boasts a stunning design that sets a new benchmark for SUV styling trends but also features an exquisitely crafted interior, dedicated to creating a noble and elegant cabin atmosphere—luxurious yet dynamic, highlighting solid textures and extraordinary character. Below are some key details about the Avancier: 1. The Avancier is equipped with a 2.0T turbocharged engine: This engine features dual VTC variable valve timing technology and VTEC variable valve lift technology on the exhaust side, delivering a maximum power of 200kW (272Ps) and a maximum torque of 370N·m, with a 0-100km/h acceleration time of just 7.45 seconds. 2. The Avancier comes with a 9-speed automatic transmission and SBW electronic push-button gear shifting instead of the traditional gear lever: It offers three driving modes—Snow Mode, Sport Mode, and Comfort Mode. 3. The Avancier is also equipped with a wealth of advanced active safety technologies: The Honda SENSING (Safety Sense) system, MVCS 360° panoramic imaging system, PA automatic parking assist system, CTM rearview dynamic reminder system, and more, making the driving experience easier and safer.

12

3

Share

How often should the spark plugs be replaced for Volkswagen 1.4T?

Volkswagen's turbocharged engines require spark plug replacement every 20,000 kilometers as per the manufacturer's guidelines. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type. It is recommended to follow the user manual. You can refer to the following standards for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Effects of faulty spark plugs: If the spark plugs are damaged, it can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, affecting the normal use of the vehicle. Severe erosion of the spark plug, such as scarring at the top, damage, or melted and eroded electrodes, indicates that the spark plug is damaged and should be replaced. Symptoms of faulty spark plugs in a car: Damaged spark plugs can lead to the following situations: difficulty starting the engine, low power, excessive exhaust emissions, and increased fuel consumption.

15

2

Share

How to Read the Gauge on an Air Conditioning Refrigerant Pressure Meter?

Depending on the ambient temperature, the low pressure of a refrigeration system during normal operation generally ranges between 3 to 6 bar, while the high pressure ranges between 10 to 25 bar. Below is relevant information about air conditioning refrigerant pressure meters: 1. Why does an air conditioner need Freon?: Freon is the medium that transfers heat in an air conditioning refrigeration system. Without it, heat cannot be effectively exchanged, and the air conditioner cannot cool or heat. Therefore, if the air conditioner lacks Freon, external symptoms may include poor cooling (or heating), no cooling (or heating), protective shutdown, water leakage from the indoor unit (sometimes spraying water), and ice formation on the indoor evaporator. There are also unseen issues—reduced lifespan of the air conditioner, wasted electricity, and damage to the air conditioner's compressor. Thus, to use an air conditioner normally, there must be sufficient Freon. 2. How much Freon should be added to an air conditioner?: During hot summer weather (when the ambient temperature is above 32°C), the pressure gauge needle should stabilize at 0.45 MPa. In spring and autumn, it should be 0.3 MPa. In winter, Freon addition is not entirely based on the pressure gauge reading (the reference pressure is 1.8 MPa), but rather relies on the technician's experience or observing the amplitude of the pressure gauge needle's swing.

14

3

Share

When will Beijing stop allowing registration of China 5 vehicles?

Beijing stopped allowing registration of China 5 emission standard vehicles on July 1, 2019. Vehicles sold before this date that meet the China 5 emission standards must complete registration before October 1. Late registrations will not be processed. Below is relevant information about China 6: 1. Phases: The country has divided the "China 6 standard" into two phases, "China 6a" and "China 6b," with nationwide implementation planned for 2020 and 2023, respectively. However, many regions have implemented the China 6 standard ahead of schedule. After July 1, China 5 vehicles cannot be registered. (Other provinces should follow local policies.) However, there is usually a transition period for standard implementation. For example, Henan Province has set a one-month transition period. Vehicles with purchase invoices issued before the standard implementation date can complete registration within one month after the standard takes effect. 2. Announcement: The China 6 standard was announced by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine on December 23, 2016, and June 22, 2018, respectively. The "Limits and Measurement Methods for Emissions from Heavy-Duty Diesel Vehicles (China VI)" came into effect on July 1, 2019. The implementation of the China 6 standard imposes stricter requirements on emissions such as carbon monoxide, nitrogen oxides, and hydrocarbons.

16

3

Share

What Causes Misalignment in Car Display Touchscreens?

What does 'auto' mean for car lights?

Where to Set Up BMW Rearview Camera?

Where is the fuel tank cap opened on the Avancier?

How often should the spark plugs be replaced for Volkswagen 1.4T?

How to Read the Gauge on an Air Conditioning Refrigerant Pressure Meter?

When will Beijing stop allowing registration of China 5 vehicles?

What to do if the rear door of Baojun 510 cannot be opened from the inside?

What are the consequences if the vehicle annual inspection time is exceeded?

Is the 2012 Mercedes-Benz E300L an Imported Model?

Where is the cabin air filter located on the Renault Kadjar?