···
Log in / Register

What Causes Low Pressure in the Left Rear Tire?

3 Answers
AllisonLee
09/05/25 4:01am
Low pressure in the left rear tire can be caused by abnormal tire pressure, failure to reset the tire pressure monitoring system, or damage to the tire pressure sensor. Abnormal tire pressure: Generally, an alarm will trigger if the pressure is below 1.8 bar or exceeds 3.0 bar. In such cases, a tire inspection and pressure adjustment are necessary. Failure to reset the tire pressure monitoring system: If the tire pressure monitoring system is not reset after inflating the tires, it will continue to display the previous data, causing the tire pressure warning light to illuminate. Simply resetting the tire pressure monitoring system will resolve this issue. Damage to the tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, such as by hitting an obstacle, the tire pressure warning light may also activate. In such cases, the only solution is to replace the damaged sensor with a new one.
Was this review help?
20
2
Share
GiselleFitz
09/17/25 4:34am
I often notice that the left rear tire pressure is low while driving, which is quite common, mostly due to natural air leakage or a puncture from a nail. Air can slowly leak out, especially when the valve seal is faulty or the wheel rim is corroded. Tire pressure can drop more quickly with temperature changes, and it's more noticeable in winter. If the car feels unstable, it's important to check the tire pressure with a gauge immediately. Don't ignore it, as it can lead to excessive tire wear, safety risks, and even a blowout. I usually check the tire pressure regularly at free inspection points at gas stations to catch issues early and save on repair costs. Parking away from broken glass and sharp objects can also reduce risks. If low pressure is detected, visit a professional shop promptly for inflation or tire replacement to avoid further issues.
Was this review help?
18
5
Share
Expand All
Kelsey
10/31/25 5:05am
Low tire pressure is no small matter, especially in the left rear wheel position, which could be due to a scratched tire sidewall or aging rim seals. If the air leaks rapidly, you must pull over immediately and turn on the hazard lights. Safety comes first—low tire pressure affects handling and can easily cause skidding during turns. Other common causes include loose valve caps or foreign object punctures. It's advisable to keep a portable tire pressure gauge in the car for regular monitoring. Never take risks while driving on highways, as a minor issue can escalate into a major accident. Regular maintenance is crucial; checking the tires during car washes can help prevent problems—prevention is key.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

Does running out of fuel and stalling the car have any impact on the vehicle?

Running out of fuel and stalling has minimal impact on the car, but it's not advisable to do this frequently. Here's relevant information: 1. Overview: The fuel system's function is to supply the engine with a specific quantity of clean, well-atomized gasoline according to its operating conditions, allowing it to mix with air and form a combustible mixture. Additionally, the fuel system needs to store a considerable amount of gasoline to ensure the vehicle has a substantial driving range. 2. Classification: The fuel system also includes electronically controlled gasoline injection systems, fuel supply systems (including auxiliary devices such as fuel tanks, fuel filters, fuel pumps, oil-gas separators, fuel lines, and fuel gauges).
9
0
Share

What does 9AT transmission mean?

It refers to a 9-speed automatic transmission. The "AT" stands for automatic transmission, while the number 9 indicates it has 9 forward gears. As a core component of automobiles, transmissions significantly impact vehicle performance, safety assurance, and stability. Below are more relevant details: 1. Advantages of 9AT transmission: Its greatest benefits are fuel efficiency and faster acceleration. The core structure of a 9AT transmission consists of 4 planetary gear sets and 6 shift elements, one more shift element than the 8HP. With multiple gears, the gear ratio difference between each gear is reduced, providing a wide range of reduction ratios. This allows for lower engine speeds at high speeds, resulting in reduced fuel consumption and stronger acceleration. 2. Disadvantages of 9AT transmission: The increased number of gears means more internal components, higher manufacturing and R&D requirements, and consequently greater costs. The complex internal structure also leads to more potential failure points. Additionally, compressing component sizes to fit the housing reduces the torque capacity.
6
2
Share

Is the Road Slippery During Rain or After Rain?

At the beginning of rain, the road surface is most prone to becoming slippery. Extended information about driving in rainy weather is as follows: 1. Overview: The incidence of car accidents in rainy weather is five times higher than in sunny weather. When driving in windy and rainy conditions during summer, the driver's visibility is obstructed, and the viewing distance is shorter, especially during heavy rainstorms when the windshield wipers cannot promptly clear the rainwater from the windshield, leaving the driver's vision blurred. 2. Maintain Good Visibility: Besides driving cautiously when on the road in rainy weather, it is essential to promptly turn on the windshield wipers. In dim weather conditions, the low beam and fog lights should also be activated. If there is frost on the front windshield, turn on the air conditioning and direct the cold air towards the front windshield. If the rear windshield has frost, activate the rear windshield heater to quickly eliminate the frost and prevent obstructed visibility of vehicles behind.
14
5
Share

What are the effects of depressing the clutch on a downhill slope?

Depressing the clutch on a downhill slope means coasting in neutral. Once the vehicle's braking system fails, the result is that the driver completely loses control of the vehicle. Keeping the clutch depressed for prolonged periods causes the release bearing to rotate at high speeds continuously, significantly reducing its lifespan. It can also lead to excessive wear in the clutch system. Additional information about the clutch is as follows: 1. Introduction: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. During driving, the driver can depress or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. 2. Definition: The clutch, commonly known as "geely zi" in Hong Kong, is a device that switches the engine power of a car or other power machinery to the axle.
3
3
Share

Handle Violations First or Renew the License First?

First, you must handle the violations before applying for license renewal. When renewing a driver's license, it is not allowed to have any outstanding violations or unpaid fines. All violations must be settled, and fines must be paid before the license can be renewed. If you have outstanding violations and need to renew your license, please first visit the traffic enforcement station of the local police branch to handle the violations, pay the fines at the bank, and then proceed to the relevant license renewal office to complete the renewal process. Documents required for license renewal: Bring two copies of your ID card, two recent 1-inch color passport photos without headwear, the original ID card, the original driver's license, and a medical examination certificate from a county-level or higher hospital (free medical examinations are also available at the vehicle management office). License renewal process: The driver submits the required documents to the vehicle management office where the driver's license was originally issued. The vehicle management office will process the renewal within one working day after verifying the documents.
16
5
Share

Are LED headlights brighter than xenon headlights?

LED headlights are brighter than xenon headlights. The functions of automotive LED lights are: 1. Activating turn signals to alert following vehicles and reduce rear-end collisions; 2. Improving road visibility to enhance driving safety; 3. Informing trailing vehicles about braking actions to prompt speed reduction; 4. Using hazard lights during emergency stops or poor visibility conditions to notify surrounding traffic. Maintenance methods for automotive LED lights include: 1. Regularly inspecting lamp covers to prevent moisture accumulation; 2. Periodically replacing bulbs; 3. Properly adjusting headlight height; 4. Using high-quality replacement bulbs; 5. Protecting lights from foreign object impacts.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.