What Causes Loud Engine Noise When Accelerating Hard?

What maintenance items are required for a vehicle at 40,000 kilometers?

Here is a detailed introduction to the maintenance items for a vehicle at 40,000 kilometers: 1. Engine oil and oil filter replacement. This primarily targets the lubrication system, whose main function is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter's role is to remove various impurities from the oil, ensuring the lubrication system operates normally. The oil filter should be replaced along with the oil during an oil change. Under normal circumstances, a car requires maintenance every 5,000 kilometers. 2. The air filter's function is to filter the air before it enters the cylinders, removing impurities, dust, sand, and other foreign particles. The cleaning and maintenance of the air filter depend on the usage environment. The fuel filter is typically replaced after driving 20,000 to 25,000 kilometers. 3. Spark plugs are consumable parts and should be replaced every 20,000 kilometers. Additionally, components such as brake fluid, transmission fluid, the battery, throttle body, fuel injectors, and brake pads are all part of the inspection items during routine maintenance, with maintenance and servicing performed as needed based on usage conditions.

20

1

Share

What is the fuel consumption of the Haval F7?

The official combined fuel consumption of the Haval F7 is 6.6-7.8L/100km. Currently, there are 8 models of the Haval F7 on sale. The combined fuel consumption for the two-wheel drive i-Type, two-wheel drive i-Beauty, two-wheel drive i-Tide, two-wheel drive i-Shine, and two-wheel drive i-Cool is 6.6L/100km. The combined fuel consumption for the two-wheel drive i-Model and two-wheel drive i-Dynamic is 7.1L/100km. The combined fuel consumption for the four-wheel drive i-Joy is 7.8L/100km. The above figures are the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.0-8.4L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during operation, thereby making the car more fuel-efficient. By anticipating road conditions and adopting slow and uniform acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Timely oil changes can reduce carbon deposits (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the mileage. Close the windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance on the car, requiring more power and thus increasing fuel consumption.

7

3

Share

How to Remove the Rearview Mirror?

The steps to remove the rearview mirror are as follows: 1. First, adjust the rearview mirror to a suitable position. 2. There will be a larger gap between the mirror and its housing. 3. At this point, you can see the clips securing the mirror. 4. Use a pry tool to release the clips and remove the mirror. The functions of the car rearview mirror include the following: 1. Observing the road conditions behind. When preparing to change lanes, first turn on the turn signal, then check the rearview mirror to observe the situation of vehicles behind, and confirm it is safe before changing lanes. 2. Checking the rearview mirror during emergency braking. When there is an emergency ahead requiring sudden braking, observing the central rearview mirror can help determine if there is a vehicle closely following behind. This allows you to adjust the braking intensity appropriately based on the distance to the vehicle in front to avoid a rear-end collision. 3. Estimating the distance to the vehicle behind. The central rearview mirror can help judge the distance to the following vehicle. When the front wheels of the following vehicle are just visible in the central rearview mirror, the distance is approximately 13 meters. When the grille is visible, the distance is about 6 meters. When the grille is just out of view, the distance is roughly 4 meters.

6

5

Share

What to Do If the First Car Maintenance Is Overdue?

If the first maintenance time has passed and the first maintenance has not been carried out, it is recommended that car owners go to the 4S store immediately for the first maintenance. The following is an introduction to the first car maintenance: 1. Introduction: The first car maintenance is the first mandatory maintenance after the new car leaves the factory. In China, except for imported models, the first maintenance of domestic and joint venture models is basically free, and the oil change is free of charge. 2. First maintenance items: The first maintenance is to replace the engine oil and oil filter. While replacing the engine oil and oil filter, a comprehensive inspection of the vehicle will be carried out, including all vehicle lights, the level of all vehicle fluids, whether all vehicle electrical systems are functioning normally, tire inspection and pressure adjustment, whether all chassis components are normal, whether the engine and transmission are leaking oil, and whether they are working normally. A professional diagnostic device will be used to perform a computer inspection of the entire vehicle and reset the maintenance reminder. The maintenance and upkeep of the vehicle throughout its life cycle can greatly increase the overall life of the vehicle if done on time. 3. Other items: A few vehicles may also need to replace the transmission oil and differential oil and other fluids during the first maintenance. The specific requirements should be based on the maintenance manual. Different brand models may have different requirements, but most of them require the first maintenance at 3,000 to 5,000 kilometers. Some brand models may require the first maintenance at around 8,000 to 10,000 kilometers.

16

4

Share

Can China 5 Vehicles Still Be Licensed After the Implementation of China 6 Standards?

After the implementation of China 6 standards, China 5 vehicles cannot be licensed, but they can still be driven on the road. The new regulations only constrain automobile manufacturers, requiring that new products must meet the emission regulations of China 6. Below is the relevant introduction to China 5 and China 6 standards: 1. Two phases of China 6 standards: The China 6 standard is divided into two phases, with the initial phase being a transitional stage, and the latter phase representing the true China 6 emission standard. Taking gasoline vehicles as an example, China 6A is a slight improvement over China 5, mainly targeting CO emissions and PN particulate matter. China 6B is much stricter, with many emission limits being approximately halved compared to China 5. 2. China 6 vehicles retain value better: Whether to buy a China 5 or China 6 vehicle depends on individual circumstances. If you plan to use the car until it is scrapped or for eight to ten years, it is recommended to buy a China 5 vehicle, as there will be significant discounts on China 5 vehicles at this time when China 6 is about to be implemented. If you want a car that retains its value better, it is advisable to buy a China 6 standard vehicle.

15

3

Share

How to Fasten Seat Belts When Getting in the Car?

When using seat belts, it's important to pay attention to the distance between the seat and the steering wheel. Below are relevant instructions on how to fasten seat belts: 1. Correct Fastening Method: After adjusting the seat, sit upright. Grasp the buckle of the seat belt, pull it down along your body, ensuring it doesn't twist, and then insert the buckle into the latch. At this point, remember to tug the buckle upward to confirm if the seat belt is securely locked. Avoid reclining the seat back too much, as this may prevent the seat belt from extending and retracting properly. 2. Fastening Methods for Different Positions: The common shoulder belt should be fastened across the shoulder and chest, never under the arm. The lap belt should be fastened as low as possible, snug against the hip bones, not the waist. This method ensures that in the event of a collision, the impact force is distributed to the pelvic bones, maximizing body stability. After tightening the lap belt, it's advisable to pull the lap belt downward at the buckle end while pulling the shoulder belt upward.

10

3

Share

What Causes Loud Engine Noise When Accelerating Hard?

What maintenance items are required for a vehicle at 40,000 kilometers?

What is the fuel consumption of the Haval F7?

How to Remove the Rearview Mirror?

What to Do If the First Car Maintenance Is Overdue?

Can China 5 Vehicles Still Be Licensed After the Implementation of China 6 Standards?

How to Fasten Seat Belts When Getting in the Car?

What is the method for matching car remote control chips?

Is Annual Inspection the Same as Annual Review?

How to Use Car Rearview Mirrors?

What License Plate Can a Hybrid Vehicle Get?