···
Log in / Register

What Causes Loud Car Noises?

3 Answers
McGianna
07/29/25 8:57am
There are several reasons for loud car noises, including unsuitable engine oil, aging and loose belts, excessively high water temperature, dirty and clogged intake systems, poor sound insulation, etc. Different issues require corresponding inspections and repairs. Unsuitable engine oil: If the oil viscosity is too high and lubrication deteriorates, it may cause loud engine noise. Promptly visit a repair shop to check whether the oil needs replacement. When changing the oil, always choose the type suitable for your car's engine and ensure the oil quality. Aging and loose belts: Check if the belts are loose. Sometimes, loose belts can increase noise in the engine compartment, requiring belt tightening. If the looseness is due to belt aging, replace the belt promptly. Excessively high water temperature: Loud engine noise may result from high water temperature. Check if the temperature gauge is normal and whether there is smoke in the engine compartment. If the water temperature is too high, do not drive the vehicle. Park it in an open area and open the radiator to cool it down. Additionally, ensure the coolant is replaced before winter. Dirty and clogged intake system: If the noise is particularly noticeable when the vehicle idles at high RPM, it may indicate clogging in the throttle body, intake ducts, or fuel injectors, requiring cleaning. Poor sound insulation: If the interior noise is excessive, it suggests poor sound insulation. Check if the vehicle's sealing strips show signs of aging. If so, reseal or add soundproofing materials.
Was this review help?
12
0
Share
LaKinsley
08/12/25 7:45am
I often encounter the problem of loud car noise while driving, especially the annoying whooshing sound at high speeds. Common causes include severely worn tires or improper tire pressure, engine aging leading to insufficient lubrication and humming, exhaust pipe leaks causing banging sounds, worn brake pads producing sharp friction noises, and loose suspension systems that rattle when going over bumps. Sometimes wind noise is also amplified due to poor window sealing. I think simple solutions are to first check tire condition and pressure, and regularly maintain the engine oil system; if the noise persists, promptly visit a professional repair shop for diagnosis. Safety should never be delayed, as tire issues can pose a high risk of losing control. Addressing problems promptly ensures a more comfortable and worry-free driving experience.
Was this review help?
7
4
Share
Expand All
LeSteven
10/06/25 2:50am
As an experienced driver who has driven many cars, I must say that excessive car noise is no small matter. Common sources include brake system malfunctions causing screeching sounds, damaged wheel bearings producing a humming noise, engine knocking or poor lubrication increasing noise, unbalanced or worn tires amplifying road noise, and exhaust system leaks magnifying sound. These could all indicate potential safety hazards - for instance, a broken bearing could easily lead to accidents if it fractures. I always remind my friends to get early inspections, especially listening to the engine and brakes before long trips. Regular oil changes, tire maintenance, and tightening suspension components can effectively prevent issues. When in doubt, professional inspection at a repair shop is crucial - protecting your car is just as important as protecting yourself.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

How to Manually Deactivate the MG 3 Anti-Theft System?

First, locate the wiring distribution of the anti-theft system, which is generally found beneath the steering wheel or inside the protective panel under the A-pillar. Then, simply disconnect the input wire of the anti-theft device, rendering it ineffective at this point. Some anti-theft devices are equipped with fuse protection. In such cases, you need to locate the corresponding fuse position and remove it, effectively deactivating the car's anti-theft system.
17
3
Share

What to Do When the Motorcycle Engine Makes a Ticking Sound?

If there is abnormal noise at the moment of starting, and the noise disappears when the engine is idling after starting, then the fault point is likely the carbon brushes inside the starter motor. If there is abnormal noise when the engine is idling after starting, the fault point is likely due to excessive clearance between the hydraulic tappets and valves inside the engine cylinder head.
1
0
Share

How to Calculate the Fuel Consumption per 100 Kilometers for a Motorcycle?

The owner should first record the odometer reading L1 when the fuel level is high and the engine cuts off due to low fuel. Then, note down the amount of fuel YL added during refueling. When the fuel is again used up to the high fuel level cutoff point, record the current odometer reading L2. Subtract L1 from L2 to get the distance traveled, then divide this by Y to obtain the number of kilometers the motorcycle can travel per liter of fuel in actual driving conditions.
7
2
Share

How to Check After Annual Vehicle Inspection?

With the advancement of internet-based services, the traffic management department has launched an app called 'Traffic Management 12123', which can be downloaded and installed from major app stores. You can also visit the vehicle management office to inquire. Bring your ID card, driver's license, and vehicle registration certificate to the violation handling hall, submit the documents to the staff, and you can check for free.
4
1
Share

What to Do When a Motorcycle Won't Start After Running Out of Fuel?

If it's an electric start, check if the battery has power. You can try jump-starting with a new battery's connection cables. If it starts, it means the battery was low on charge. For motorcycles, gasoline serves as the combustion energy source. The checking method is to switch the fuel valve to the reserve tank, or you can disconnect the fuel line and shake the bike.
17
3
Share

What is the correct sequence for starting the ignition?

Turn the ignition key clockwise to the START position. Apply slight forward pressure to rotate it. Release immediately when the engine starts, as the ignition switch will automatically return from the start position to the normal ignition position. After the engine starts, observe the instrument panel indicators and check for any abnormal engine noises, water leaks, or oil leaks. If the engine fails to start after three attempts, identify and resolve the issue before attempting to start again.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.