What Causes Lines to Appear on the Car's Central Control Screen?

3 Answers
LeKevin
07/23/25 11:54am
Introduction to the causes of lines appearing on the car's central control screen: Incorrect resolution settings: The display resolution is set incorrectly or there is an issue with the graphics card driver. It is recommended to increase the display resolution and refresh rate as much as possible, and reinstall the graphics card driver. Presence of high-power electrical appliances nearby: There are high-power electrical appliances or magnetic interference near the display. Try relocating the display to a different position or orientation. Poor connection at the interface: There is a poor connection between the display interface and the graphics card interface. Try reconnecting the cables and interfaces, or switch the display interface from VGA to DVI.
Was this review help?
5
3
Share
SanAugust
08/10/25 10:01am
I remember once while driving, a vertical line suddenly appeared on the center console screen, which really affected my navigation. I suspect it might be due to screen aging or sun damage, as high temperatures can cause issues with LCD screens. After restarting the car, it sometimes disappears, but the problem frequently recurs, indicating possible loose connections or internal short circuits. I tried checking the cable connections myself to see if they were secure, but without proper tools, it was difficult. This is a pretty common issue, especially when starting the car after parking outdoors in summer. My suggestion is to first try a soft reboot—turn the system off and on again. If that doesn’t help, it’s best not to tamper with it yourself and instead take it to a professional repair shop for diagnosis to prevent a minor issue from turning into a major fault. Also, during regular maintenance, make sure to clean the screen properly and avoid using wet cloths to prevent short circuits.
Was this review help?
3
3
Share
Expand All
Kendall
09/22/25 3:25am
Lines appearing on the screen are mostly related to the display unit or circuitry in my opinion. It could be a software issue causing data corruption, such as compatibility problems after an update; or hardware issues like damaged screen panels or loose internal wiring connections. Another possible reason might be significant voltage fluctuations in the vehicle affecting power supply. First, try resetting the system by disconnecting the battery for a few minutes and then reconnecting it to see if the lines disappear. During inspection, pay attention to whether there are any cracks or indentations on the screen surface, as this is crucial. If you're not knowledgeable, avoid forcing any operations to prevent further damage. It's recommended to consult a car-savvy friend or visit a professional shop to use diagnostic tools to identify deeper issues, such as motherboard or graphics card failures. For prevention, regularly update the vehicle's software and avoid parking in direct sunlight.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Can I Switch to Automatic Transmission After Passing the Manual Transmission Subject 2 Test?

You cannot directly switch from manual transmission to automatic transmission. If you wish to change to automatic transmission, you need to re-register and retake the test. Differences between manual and automatic transmission in Subject 2: Manual transmission vehicles have a clutch, so during practice, you must first master clutch control. In terms of test items, manual transmission includes reverse parking, right-angle turns, parallel parking, curve driving, and hill starts. Automatic transmission, on the other hand, omits the hill start test because it lacks a clutch, making this item less critical. Judgment of boundary lines and markings can also be assessed in the Subject 3 test. Subject 2 test evaluation: The full score is 100 points, with evaluation criteria for failing, deducting 20 points, deducting 10 points, and deducting 5 points. You get one attempt for the Subject 2 test, and if you fail, you can retake it once. If you do not take the retest or fail the retest, the test ends, and the applicant must reschedule the test after ten days.
8
0
Share

What are the effects of driving a sedan through deep water?

If a car passes through deep water without stalling, it will not cause significant damage to the vehicle. However, it is essential to inspect and clean the car as soon as possible, checking whether the brakes are functioning properly. After successfully driving through water, avoid accelerating immediately and continue driving at a low speed for some time. Below is more information about driving through water: 1. Reasons for vehicle impact: Whether driving at high speed through accumulated water has an effect mainly depends on the depth of the water on the road and the height of the waves generated by the vehicle passing through at high speed. If the water reaches the height of the vehicle's air intake, it can directly cause the engine to stall. 2. What to do after stalling: If the engine stalls, do not attempt to restart the vehicle immediately. Instead, call your insurance company and a repair service to wait for assistance. After towing the car to a repair facility, check for water ingress inside the engine. 3. Points to note when driving on waterlogged roads: Driving on waterlogged roads can reduce the car's braking performance and increase the risk of skidding. Drivers should hold the steering wheel with both hands to maintain balance, drive straight and at a low speed. When turning, apply the brakes gently to prevent the tires from locking up and causing the vehicle to skid.
6
1
Share

Why does the BMW 116 experience intermittent idling vibration?

BMW 116 intermittent idling vibration may be caused by severe engine carbon deposits or ignition system issues. Severe engine carbon deposits: The most common cause of car vibration is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold-start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making ignition difficult. In this situation, the engine will only start easily after the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits will be drawn into the combustion chamber by the engine's vacuum suction, making the air-fuel mixture too rich. This fluctuation between lean and rich mixtures causes idling vibration after a cold start. The lower the temperature, the more fuel is required for cold starts, and the presence of carbon deposits will significantly affect whether the cold start proceeds smoothly. Ignition system issues: Check the working condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or inadequate spark plug firing can also lead to such fault symptoms.
16
0
Share

Can the temporary license plate still be used on the 16th if it expires on the 16th?

A temporary license plate that expires on the 16th can still be used on the 16th; you are allowed to drive with it on the expiration day. Penalties for exceeding the validity period: New vehicles using temporary license plates must not exceed 15 days. Owners should promptly apply for official license plates from the vehicle management authority. After expiration, penalties may include vehicle impoundment, fines, and a deduction of 12 points from the driver's license. Methods to register after the temporary license plate expires: Towing: Tow the vehicle to the vehicle management office for registration, but this method can be costly. If official license plates are not issued on the same day, the owner would need to tow the vehicle back home, making this method not recommended. Reapplying for a temporary license plate: Temporary license plates are generally valid for 15 days. Owners should apply for official license plates within the temporary license's validity period. If the temporary license plate expires and official plates have not yet been issued, reapplying for a temporary license plate is the most cost-effective method. However, temporary license plates can only be applied for a maximum of three times.
2
5
Share

What is the fuel tank capacity of the 4008 in liters?

The fuel tank capacity of the Peugeot 4008 is 53 liters, as officially announced. The recommended fuel grade for the Peugeot 4008 is 92, with a fuel consumption of 6.2-6.4L per 100 kilometers. A full tank can cover a distance of 828 to 855 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
20
0
Share

Can the Issuing Location of a Driver's License Be Changed?

Yes, you can change the issuing location of your motor vehicle driver's license. You need to visit the vehicle management office or the traffic management department of the public security authority at the original issuing location to complete the transfer-out procedures for the motor vehicle. After obtaining the transfer-out documents, you can then complete the transfer-in procedures in another region, thereby completing the transfer of the driver's license issuing location. Below is an introduction to the process: Driving school registration time: When applying for a motor vehicle driver's license at a driving school, the registration process takes about half an hour to complete. After registration, you will wait for the driving school's notification to undergo a physical examination. Once the physical examination is completed, you will participate in the study for the first subject of the driver's license. After meeting the required study hours, you can take the exam. Other subjects should be completed in the same order. There is no need to repeat the physical examination within six months. Time to obtain a motor vehicle driver's license: Under normal circumstances, it takes about 45 days to obtain a motor vehicle driver's license, with the maximum time not exceeding three years. This period starts from the completion of the first subject exam of the driver's license. If this time limit is exceeded, the eligibility for the driver's license exam will be canceled, and you will no longer be able to take the exam.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.