What Causes Image Distortion and Whitening on the Car's Central Control Display Screen?

1 Answers
HarperAnn
07/30/25 12:55am
Image distortion and whitening on the car's central control display screen are abnormal and require timely inspection and repair. Overview: The car's central control is the area that manages comfort and entertainment devices such as air conditioning and audio systems. It includes the central door lock system, allowing the driver to control all door switches and the window lift system. Functions: The central door lock system primarily features three functions: central control, speed control, and individual control. The driver can operate all door locks. Additionally, when the vehicle reaches a certain speed, the doors automatically lock. Each door also has an independent switch, enabling individual control over specific doors.
Was this review help?
10
1
Share
More Forum Discussions

Introduction to the Steering Wheel Buttons of the Haval Chitu

The steering wheel of the new Haval H6 features better materials and a stronger texture compared to the older model, with a more sporty feel. Additionally, the steering wheel buttons of the new Haval H6 have undergone some corresponding adjustments. Below is an introduction to the steering wheel buttons of the Haval Chitu: 1. Left Side: Volume adjustment: press up to increase volume, press down to decrease volume. Previous track in multimedia. Next track in multimedia. Scroll up through the dashboard trip computer function menu. Scroll down through the dashboard trip computer function menu. Confirm selection in the function menu. Return to the previous menu. 2. Right Side: Activate voice function. Turn on cruise control setting. Turn off cruise control setting. Answer or hang up Bluetooth calls. Increase cruise control speed. Decrease cruise control speed.
12
2
Share

Is the Wuling Hongguang Mini a four-seater?

The Wuling Hongguang Mini is a four-seater. Here are the relevant details: 1. Power: The maximum charging power of this car is 2.5kW, and the Wuling Hongguang Mini only supports slow charging, not fast charging. 2. Body dimensions: The length, width, and height of this car are 2917 mm, 1493 mm, and 1621 mm respectively, with a wheelbase of 1940 mm. The Wuling Hongguang Mini is a micro electric vehicle under the Wuling brand. It is a three-door, four-seater hatchback. This model is a single-motor variant, with the motor positioned at the rear, making it a rear-wheel-drive vehicle.
17
4
Share

Should the Audi RS5 use 95 or 98 octane gasoline?

The Audi RS5 uses 95 octane gasoline, which is the recommended fuel grade specified in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, you can also find it indicated on the fuel tank cap of the Audi RS5. Generally, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, those between 10.0-11.5 should use 95 octane gasoline, and those with a higher compression ratio should use 98 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the required gasoline grade, as high compression ratio engines can also be tuned to use lower octane fuel. This is because factors other than compression ratio, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Audi RS5 occasionally uses the wrong gasoline grade, simply switching back to the correct grade after use is sufficient. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use low-grade gasoline, using a higher grade will not cause damage, but the increase in octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, manifesting as poorer performance. For vehicles recommended to use high-grade gasoline, using a lower grade can cause engine knocking. Due to the significantly lower octane number, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites, resistance will arise during the upward stroke. This resistance makes the engine run very unstable. If the knocking is imperceptible, it only increases noise without obvious engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on the pistons and cylinders, and in severe cases, cylinder scoring.
10
4
Share

Where is the open circuit in the driver-side detonator circuit located?

An open circuit in the driver-side detonator circuit is generally located in front of the gear lever or beneath it. Relevant information about the four stages of the side airbag detonator is as follows: 1. Stage 1: The car crashes, reaching the detonation limit of the airbag system. The sensor takes 10ms from detecting the collision to activating the current. The detonator ignites the gas generator of the airbag, while the driver remains in an upright position. 2. Stage 2: The gas generator fully inflates the airbag within 30ms. After 40ms of the crash (at a speed of 50km/h), the driver's body begins to move forward. Since the seatbelt is diagonally fastened to the driver, it stretches as the driver moves forward, absorbing part of the impact energy generated during the crash. 3. Stage 3: 60ms after the car crash, the driver's head and upper body press against the airbag. The exhaust port behind the airbag allows the gas pressure to escape evenly under pressure. 4. Stage 4: 110ms after the car crash, the driver moves back into the seat. Most of the gas has escaped from the airbag, and the front view becomes clear again.
14
4
Share

What Causes the Noise When Braking in a BMW?

BMW braking noise may be caused by worn brake pads. Here is relevant information: 1. Background: BMW cars refer to vehicles produced by Bayerische Motoren Werke AG (abbreviated as BMW), with main series models including 1, 2, 3, 4, 5, 6, 7, and 8. BMW is renowned worldwide for producing luxury cars, motorcycles, and high-performance engines. 2. Logo Meaning: The BMW emblem features a double-circle design with the 'BMW' inscription above the circles. The entire logo resembles the blue sky, white clouds, and a continuously rotating propeller, symbolizing the company's long history and its consistent mission to meet customer desires with the latest technology and advanced concepts. It reflects BMW's dynamic spirit and continuous innovation, showcasing the superior quality, technological leadership, and global presence of BMW cars.
19
5
Share

What are the causes of steering shaft noise?

Steering shaft noise may be caused by lack of lubrication in the steering column, friction, and other reasons. Here are specific explanations: 1. Avoid turning the steering wheel while stationary: Try to steer only after the vehicle is in motion. Turning the steering wheel while stationary should only be used occasionally in special circumstances for maneuvering out of parking spaces. 2. Return the steering wheel to the center position: When the vehicle is parked, the steering wheel should be returned to the center position to avoid placing load on the suspension system and tires. 3. Make turns in one motion: When making a U-turn, try to avoid turning the steering wheel to the extreme lock position.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.