What Causes Idle Shaking After Cleaning the Throttle Body?

Can Non-Operational Vehicles Be Converted to Operational Vehicles?

Non-operational vehicles can be converted to operational ones, but they must meet the following conditions based on whether they are engaged in passenger or freight transport: 1. According to Article 8 of the 'Regulations on Road Transport of the People's Republic of China': The vehicle must be suitable for the intended business and pass inspection; the driver must meet the conditions specified in Article 9 of these regulations; and there must be a sound safety production management system. 2. According to Article 9 of the 'Regulations on Road Transport of the People's Republic of China': The driver must hold a corresponding motor vehicle driving license; be no older than 60 years of age; and have no record of major or above traffic responsibility accidents within the past 3 years.

18

5

Share

How to use the Mitsubishi Pajero power steering pump?

Usage of the Mitsubishi Pajero power steering pump: When the vehicle is turning, the torque sensor detects the steering wheel's torque and intended turning direction. These signals are sent to the electronic control unit via the data bus. Based on the transmitted torque, intended turning direction, and other data signals, the electronic control unit issues action commands to the motor controller. The motor then outputs the corresponding amount of turning torque as needed, thereby generating power steering. In terms of safety design and configuration, the Pajero features a highly advanced and reliable safety system, including three-point seat belts with pre-tensioners and dual airbags, as well as a four-wheel ABS system with electronic brake force distribution.

12

4

Share

What does the engine exclamation mark indicator mean?

The engine exclamation mark indicator is the vehicle's engine malfunction warning light. Below is a detailed introduction about automotive engines: 1. Overview: A car engine is the device that provides power to the vehicle, determining its performance, fuel efficiency, stability, and environmental friendliness. Depending on the power source, automotive engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems, among others. 2. Additional Information: Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines, capable of converting the chemical energy of fuel into mechanical energy through piston movement to deliver power output. Gasoline engines feature high rotational speeds, lightweight construction, low noise levels, easy starting, and lower manufacturing costs. Diesel engines have higher compression ratios and thermal efficiency, offering better fuel economy and emission performance compared to gasoline engines.

1

0

Share

How many points are deducted for driving in the wrong direction on non-highway roads?

Driving in the wrong direction on non-highway roads results in a deduction of 3 points. Below are the relevant details: 1. Regulations: According to Order No. 123 of the Ministry of Public Security of the People's Republic of China, namely the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," it is clearly stipulated that driving in the wrong direction on a one-way road results in a penalty. Motor vehicle drivers who violate prohibitory signs or markings, fail to overtake or yield as required, or drive in the wrong direction will be penalized with a deduction of 3 points for each violation. 2. Article 25: Motor vehicle drivers who violate these regulations by reversing, driving in the wrong direction, or making U-turns or turns across the central divider on highways will be fined and may also have their driving license suspended for up to twelve months.

11

3

Share

How many photos are required to determine running a red light?

Three photos captured by electronic cameras are used to determine: a photo of the vehicle crossing the intersection stop line, including the traffic light showing red and the license plate number; a photo of the vehicle completely passing the stop line, including the traffic light showing red and the license plate number; and a photo showing the vehicle continuing to move, by comparing whether the vehicle's position has changed, including the traffic light showing red and the license plate number. Capturing these three photos can determine that the vehicle ran a red light. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle passes through an intersection when the light is red, it constitutes the traffic violation of running a red light. Six scenarios of running a red light: Stopping immediately after crossing the line at a red light (when the light turns red, the vehicle cannot stop in time, and the front of the vehicle crosses the stop line): If the vehicle has just crossed the stop line when the light is red but stops immediately, this will not be penalized as running a red light. However, if there is obvious movement after crossing the line, it will be penalized. The three photos captured by electronic cameras for running a red light are: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are available will it be considered running a red light, resulting in a 6-point deduction under the new regulations. Running a red light under police direction (the signal is red, but the traffic officer signals permission to pass): When there is a conflict between the traffic signal and the officer's gesture, motor vehicle drivers must obey the officer's on-site command. If a driver runs a red light due to the officer's command, they can obtain a diversion certificate from the local traffic police department to avoid penalties. If the party disagrees with the penalty, they can appeal through administrative reconsideration or administrative litigation. Stopping after the entire vehicle crosses the line at a red light (failing to brake in time, causing the entire vehicle to cross the stop line): If the vehicle stops completely after crossing the stop line without further movement, it is not considered running a red light. However, this constitutes stopping beyond the line, and according to Article 4, Item 5 of the "Scoring Standards for Road Traffic Safety Violations," it results in a 3-point deduction for failing to drive or stop as required at an intersection. Reversing after stopping beyond the line (attempting to avoid penalties by reversing after stopping beyond the line at a red light): Motor vehicles are not allowed to reverse at railway crossings, intersections, one-way roads, bridges, sharp curves, steep slopes, or tunnels. Violations may result in a warning or fine. Accidentally running a red light behind a large vehicle (due to the large vehicle blocking the view, following it through the intersection): Drivers must maintain sufficient visibility to see the traffic signals ahead and ensure a safe braking distance. Generally, if a motor vehicle is photographed following a large vehicle through an intersection, it is considered running a red light due to rushing through the signal and will be penalized accordingly. Passing through an intersection during a yellow light (passing through the intersection when the signal turns yellow): Traffic authorities state that according to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," vehicles that have already crossed the stop line when the yellow light is flashing may continue to pass. However, if the driver continues to rush through after the yellow light is on, it will be considered running a red light if photographed.

19

3

Share

How to Install the Focus Exhaust Camshaft?

Focus exhaust camshaft installation method is: 1. Remove the valve cover, rotate the crankshaft to the top dead center position of cylinder 1, remove the spark plug of cylinder 1 and confirm whether it is the position of cylinder 1 with a long screwdriver; 2. Remove the two oil seals on the two camshafts and loosen the two screws inside the oil seals; 3. Use a 24 open-end wrench to rotate the intake camshaft until the special tool (parallel to the cylinder head) can lock the intake camshaft. As a compact car under Ford, the Focus has a body length, width and height of 4378mm, 1810mm and 1468mm respectively, a wheelbase of 2705mm, a top speed of 215km/h, and is matched with an 8-speed automatic manual transmission.

16

4

Share

What Causes Idle Shaking After Cleaning the Throttle Body?

Can Non-Operational Vehicles Be Converted to Operational Vehicles?

How to use the Mitsubishi Pajero power steering pump?

What does the engine exclamation mark indicator mean?

How many points are deducted for driving in the wrong direction on non-highway roads?

How many photos are required to determine running a red light?

How to Install the Focus Exhaust Camshaft?

What are the types of car insurance?

What are the reasons why a gasoline engine won't start?

Is Reverse Parking Difficult?

Should the Clutch Be Depressed or Released When Turning the Steering Wheel to Full Lock?