What Causes High Water Temperature When the Air Conditioner is On in Wuling Sunshine?

2 Answers
DaisyMarie
07/29/25 4:06pm
Here are the specific reasons for high water temperature when the air conditioner is on in Wuling Sunshine: 1. Insufficient Coolant: Coolant leakage or low coolant level can cause the engine water temperature to rise. In this case, check the coolant level and top it up if necessary. Recheck after a few days to see if the level drops significantly, and locate any leaks if present. 2. Cooling Fan Malfunction: When the vehicle is running at high speed, the generated heat cannot be effectively transferred to the coolant, affecting heat dissipation and leading to increased coolant temperature, which may cause boiling. 3. Water Pump Failure: Common water pump issues include seized bearings and damaged impellers. Seized bearings are rare, while damaged impellers, such as cracks or detachment from the pump shaft, can slow down coolant circulation, often resulting in engine overheating. 4. Thermostat Failure: The thermostat automatically adjusts the flow of coolant into the radiator based on temperature, altering the coolant's circulation range to regulate the cooling system's efficiency and ensure the engine operates within the optimal temperature range. A faulty thermostat may prevent the cooling system from entering a full circulation mode, leading to increased water temperature.
Was this review help?
1
4
Share
VanRafael
08/15/25 4:24am
I've experienced several instances where the water temperature of my Wuling Zhiguang soared when the air conditioning was turned on. Primarily, turning on the AC increases the engine's load, akin to adding heavy work, and if the cooling system can't keep up, it's prone to overheating. The core issue lies in the insufficient efficiency of the cooling system—such as slow radiator fan speed or aging blades, which prevents hot air from dissipating; if the thermostat gets stuck in the closed position, the hot water circulation is obstructed, leading to rapid temperature rise. Additionally, insufficient coolant or sludge clogging the radiator can impair heat dissipation. The extra load from the AC compressor forces the engine to work harder, causing the water temperature to spike. It's advisable to regularly check the coolant level, replace aging components in time, and avoid prolonged use of the AC in traffic during hot weather. If a problem arises, don't push it—stop the car, turn off the engine to cool down, and visit a repair shop to replace the fan or clean the radiator.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What is the purpose of a shark fin antenna?

The purpose of a shark fin antenna is: 1. Security and anti-theft - The built-in structure effectively prevents antenna theft with higher safety coefficient; 2. Convenience - No need to remove the antenna during automatic car washes or when entering space-constrained areas, saving time and effort; 3. Noise reduction - Combining aerodynamic principles with aesthetic design to effectively reduce airflow noise for quieter driving; 4. Multifunctional - Compatible with FM, GPS and GSM simultaneously; 5. Easy installation - International standard aperture size, OEM product requiring no roof dismantling; 6. Enhances vehicle communication signals; 7. Reduces static electricity on vehicle surface.
8
5
Share

What is the method to lift the rear seats of a car?

The method to lift the rear seats of a car is: 1. On both sides of the rear seat headrest, near the window, there will be a pull handle; 2. Pull the handle, and the backrest of the rear seat can be folded forward; 3. Simply push the seat cushion towards the rear of the car and lift it upwards. Car seats can be categorized into three types based on their usage: driver's seat, passenger seat, and child seat. The maintenance methods for car seats are: 1. Remove the protective plastic bag promptly; 2. Install a suitable seat cover or cushion; 3. Wipe the seats regularly; 4. Frequently dust the seats; 5. Avoid placing the seats near heat sources; 6. Avoid exposing the seats to direct sunlight.
18
4
Share

What is the throttle matching channel number for Volkswagen?

Volkswagen throttle matching channel number is 060. Note: Throttle adjustment matching is only suitable for Volkswagen vehicles equipped with electronic throttle engine systems, and the Santana GLi is not within the matching range. The following is an extended introduction: 1. Basic setting content: When the ignition switch is turned on, adaptive learning can be performed between the throttle control unit and the engine control unit. 2. Basic setting process: During the throttle basic setting, the throttle actuator moves from the maximum position to the minimum position in emergency operation. The engine control unit learns the stop position of the throttle control unit and the comparison curve between the throttle potentiometer and the throttle controller sensor through adaptive learning.
15
0
Share

What type of engine oil does the Roewe RX5 use?

The Roewe RX5 uses fully synthetic 5W30 engine oil. The functions of engine oil include: lubrication, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion protection, shock absorption, and anti-wear. Taking the 2020 Roewe RX5 as an example, it is a compact SUV with body dimensions of: length 4556mm, width 1855mm, height 1719mm, wheelbase 2700mm, and minimum ground clearance of 175mm. The 2020 Roewe RX5 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, maximum torque of 250Nm, and maximum power of 124kW. It is paired with a 6-speed manual transmission.
3
0
Share

What is the wheelbase of the Ghost?

The standard wheelbase version of the Ghost has a wheelbase of 3295 mm, while the extended wheelbase version measures 3465 mm. Below is some information about the Ghost: 1. The Ghost is equipped with a 6.6-liter twin-turbocharged V12 engine across all models, available in two versions: a low-power variant and a high-power variant. 2. Low-power variant: It delivers 571 horsepower and a maximum torque of 820 Nm. This engine reaches its peak power output at 5000 rpm and its maximum torque at 1600 rpm. 3. High-power variant: It produces 612 horsepower and a maximum torque of 840 Nm. This engine achieves its peak power output at 5250 rpm and its maximum torque at 1650 rpm.
19
2
Share

What causes the noise from the aluminum seat of the rear shock absorber in Volkswagen?

Here are the reasons for the noise from the shock absorber: 1. Damaged shock absorber: When the vehicle's shock absorber is damaged, the coordination between its components becomes problematic, causing a rattling noise when working on bumpy roads. 2. Damaged shock absorber top mount: The front shock absorber top mount of a car is made of rubber material, primarily serving to assist the shock absorber and spring in providing cushioning and shock absorption. When the top mount is damaged due to excessive wear, it not only produces noise during operation but also generates noise when turning the steering wheel while stationary, even if the shock absorber is not engaged.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.