What Causes High Temperature in Car Air Conditioning Radiator?

2 Answers
Irene
07/23/25 8:38pm
Car air conditioning radiator temperature is high due to malfunctioning electric fans or blockage by foreign objects causing poor heat dissipation. Below are the causes and solutions for this issue: Malfunctioning electric fan: The car's electric fan is controlled by a thermostat. When the water temperature rises to the upper limit, the thermostat activates the power supply, and the fan starts working. If the electric fan is not functioning properly, the radiator will not cool down in time. It is necessary to check the performance of the electric fan and its control system. Radiator surface covered by foreign objects: If the radiator surface is covered by foreign objects or clogged with dirt, heat cannot dissipate into the air. Cleaning the surface coverings promptly will solve the issue.
Was this review help?
15
1
Share
LeBrielle
08/10/25 6:36pm
Last time I went on a long-distance trip, I encountered a situation where the air conditioner radiator was scalding hot. The mechanic later explained that it was caused by poor heat dissipation. The most common issue is the condenser being completely blocked by willow catkins or insect remains, which especially happens in summer. Another possibility is the cooling fan getting stuck and not spinning, which can be checked by manually shaking the fan blades. Additionally, too much or too little refrigerant, leading to abnormal pressure, can also cause overheating. I recommend first checking if the radiator fins are blocked by dirt and gently rinsing them with a water gun. If that doesn’t work, then it’s necessary to check the fan circuit and refrigerant pressure. During regular maintenance, pay special attention to cleaning the gap between the radiator and the condenser, as this area is particularly prone to accumulating dirt.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What is the Principle of an Exhaust Gas Turbocharger?

Exhaust gas turbocharger works by channeling the exhaust gases from the engine into the turbine, utilizing the energy of the exhaust gases to drive the turbine's rotation, thereby powering the compressor mounted on the same shaft to achieve pressurization. Here are some extensions about exhaust gas turbochargers: 1. Single-stage system: Common vehicles typically use a single-stage turbocharging system, which employs one exhaust gas turbocharger. 2. Two-stage system: A dual-stage turbocharging system is mainly used for large-displacement diesel engines. Depending on the connection method of the two turbochargers, dual-stage turbocharging can be divided into two systems: in-line dual-stage compound turbocharging and parallel dual-stage compound turbocharging.
20
2
Share

How to Coordinate the Throttle and Clutch When Shifting Gears?

When starting the vehicle, pay attention to coordinating with the vehicle speed. Place the gear shift in the neutral position, and after starting the engine, press the clutch pedal all the way down. As the vehicle speed increases, gradually release the clutch pedal faster. Before shifting gears, ensure smooth gear changes by properly coordinating with the throttle. Apply the throttle gently and avoid sudden acceleration; press and release it slowly. When upshifting, always pay attention to the engine RPM—upshifting is necessary when the engine is operating within its working range.
1
4
Share

Can a Roof Rack Pass the Annual Vehicle Inspection?

Adding a roof rack will not pass the annual vehicle inspection because the inspection includes an exterior check to verify the condition of the vehicle's lights, whether the body appearance matches the original specifications, any modifications to the suspension, as well as the sunroof, tires, etc. If any aftermarket additions like a roof rack are installed, they must be removed and the vehicle restored to its original condition before the inspection to pass. The annual vehicle inspection refers to the yearly examination of vehicles that have already obtained official license plates and registration certificates, conducted according to the safety technical requirements for motor vehicle operation. Its purpose is to check the main technical conditions of the vehicle, encourage proper maintenance, ensure the vehicle remains in good condition, and guarantee driving safety.
19
0
Share

Why Does a Car Engine Vibrate Excessively?

Excessive vibration in a car engine may be caused by carbon deposit issues. Below are detailed reasons and solutions for excessive engine vibration: 1. Engine misfire: One or more cylinders in the engine are not functioning properly, resulting in intermittent exhaust flow and severe shaking of the exhaust pipe, with noticeable engine vibration. Sometimes accompanied by a sputtering sound. Solution: Seek repair at a 4S shop. 2. Aging or loosening of engine mounts: The rubber blocks between the engine and the frame, when aged or loose, can cause severe engine vibration. Solution: Replace them. 3. Carbon deposit problems: Excessive carbon deposits inside the engine can affect ignition energy, leading to vibration. Solution: Seek repair at a 4S shop.
12
0
Share

What kind of engine oil is used for the first car maintenance?

Standard original equipment manufacturer (OEM) engine oil is used for the first car maintenance, without any special designation. Whether it's the first maintenance or subsequent regular maintenance, this type of oil will be used. "OEM engine oil" is essentially engine oil products produced by oil manufacturers according to the requirements of automobile manufacturers. Engine oil is a substance enhanced with additives in base oil, mainly containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. The items covered in the first car maintenance include changing the engine oil and oil filter, as well as routine vehicle inspections such as checking the wear of tires and brake pads, the levels of various fluids in the engine compartment, the level of antifreeze, and whether the chassis brackets and tie rods are deformed.
20
1
Share

What tires does the Changan CS75 use?

Changan CS75 uses Yokohama GEOLANDAR G91 tires, with the tire specification being 225/55R19. The Yokohama GEOLANDAR G91 tires offer excellent braking performance and comfort, and the wheel design is very dynamic, featuring a two-tone color scheme. The 2020 Changan CS75 comes in two variants: two-wheel drive and four-wheel drive. The four-wheel drive version adopts a front-engine, four-wheel-drive layout with an on-demand four-wheel-drive system and a multi-plate clutch center differential. In terms of dimensions, the Changan CS75 measures 4650mm in length, 1850mm in width, and 1705mm in height, with a wheelbase of 2700mm.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.