What Causes High Fuel Consumption in the Leiling?

Must engine oil be changed after exceeding one year?

Engine oil exceeding one year does not necessarily require immediate replacement and can still be used temporarily. However, it is essential to promptly visit a qualified maintenance facility to replace both the engine oil and oil filter. This prevents the degradation of the oil's lubrication, cooling, sealing, and cleaning functions, which could otherwise lead to engine damage. Engine oil consists of base oil and additives, with the base oil being the primary component that determines the fundamental properties of the lubricant. The steps for changing engine oil are as follows: 1. Lift the vehicle, remove the undercover, and place a container beneath the drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and use a funnel to add new oil through the filler port.

15

2

Share

Where is the Cabin Air Filter Located in a Mazda 3?

The cabin air filter in a Mazda 3 is located inside the glove compartment on the passenger side. The replacement procedure is as follows: 1. Access the glove compartment; 2. Remove the glove compartment clips; 3. Press down and squeeze the glove compartment to remove it; 4. Open the cover of the cabin air filter; 5. Pull out the old cabin air filter; 6. Install a new cabin air filter. Taking the 2020 Mazda 3 as an example, it belongs to the compact car category with body dimensions of: length 4662mm, width 1797mm, height 1445mm, wheelbase 2726mm, and a fuel tank capacity of 50 liters. The 2020 Mazda 3 is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 117PS, maximum power of 86kW, maximum torque of 148Nm, paired with a 6-speed manual transmission.

8

3

Share

What is the method to reset the maintenance reminder for the Ford Kuga?

Ford Kuga maintenance reminder reset method is: 1. Connect the external control computer to the vehicle's onboard computer; 2. Select the engine option on the external computer operation interface; 3. Choose the matching function and enter the function module; 4. The control module will prompt to accept the request and update the read data; 5. On the pop-up interface, select the maximum maintenance time value and modify the stored data to new data; 6. Click confirm to modify to new data. Taking the 2019 Ford Kuga as an example, it is a compact SUV with body dimensions of: length 4524mm, width 1838mm, height 1685mm, wheelbase 2690mm, front track 1563mm, rear track 1565mm, fuel tank capacity 60l, and body weight 1592kg.

10

4

Share

What brand of transmission is used in the Envision?

The transmission brand used in the Envision is SAIC-GM. SAIC General Motors Co., Ltd., established on June 12, 1997, is a joint venture between SAIC Motor Corporation Limited and General Motors Company. It has four major production bases located in Pudong Jinqiao, Yantai Dongyue, Shenyang Beisheng, and Wuhan Branch, comprising a total of four vehicle production plants and two powertrain plants, making it one of the important enterprises in China's automotive industry. The Envision is equipped with two types of transmissions: a 7-speed dual-clutch transmission and a 9-speed automatic transmission (9AT). The 1.5-liter turbocharged engine is paired with the 7-speed dual-clutch transmission, while the 2.0-liter turbocharged engine is matched with the 9AT. Dual-clutch transmissions are currently very popular, favored by many automakers and consumers alike. The structure of a dual-clutch transmission is similar to that of a manual transmission, with the only difference being the addition of an extra clutch and a shift control mechanism. Dual-clutch transmissions offer fast shifting speeds and high transmission efficiency, making them particularly suitable for use with small-displacement turbocharged engines. When using the Envision's transmission in daily driving, the following points should be noted: Do not delay transmission fluid changes for extended periods. Although many modern vehicles come with maintenance-free transmission fluid, 'maintenance-free' does not mean 'never change.' Prolonged failure to replace the transmission fluid can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and may result in a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming to demonstrate 'smooth' operation, may shift into reverse while the vehicle is still moving, which can cause significant damage to the transmission gears and, over time, lead to gear grinding or other failures. Do not frequently climb steep slopes in Drive (D) mode. When navigating steep inclines, automatic transmission vehicles can overheat due to high load or may upshift too early, resulting in insufficient power. In such cases, it is advisable to use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the vehicle in Neutral (N) and placed onto the tow platform. Towing with a rope or directly dragging the vehicle should be avoided.

11

2

Share

What is the horsepower of the Maserati Quattroporte?

The engine equipped in the Maserati Quattroporte delivers a maximum power of 350 horsepower and 430 horsepower, respectively. In terms of body dimensions: The Maserati Quattroporte is a full-size car launched by Maserati. Its body dimensions are 5262mm in length, 1948mm in width, and 1481mm in height, with a wheelbase of 3171mm, a fuel tank capacity of 80 liters, and a curb weight of 2010kg. Regarding powertrain: This car is equipped with a 3.0T twin-turbocharged engine, which comes in high-power and low-power versions. The low-power engine has a maximum power of 257kW and a maximum torque of 500 Nm, while the 3.0T high-power engine has a maximum power of 316kW and a maximum torque of 580 Nm. During operation, the engine can output its maximum power at 5500 rpm and its maximum torque between 1750-5000 rpm.

5

Share

How much engine oil does the Captiva require?

The Captiva requires approximately 4.5 liters of engine oil. Engine oil serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide cushioning and shock absorption for the engine. Taking the 2017 Captiva as an example, it is a mid-size SUV with the following dimensions: length 4690mm, width 1849mm, height 1753mm, wheelbase 2707mm, fuel tank capacity 65 liters, and curb weight 1750kg. The 2017 Captiva features a MacPherson strut front suspension and a four-link independent rear suspension. It is equipped with a 2.4L naturally aspirated engine producing a maximum horsepower of 167PS, maximum power of 123kW, and maximum torque of 230Nm, paired with a 6-speed automatic transmission.

4

Share

What Causes High Fuel Consumption in the Leiling?

Must engine oil be changed after exceeding one year?

Where is the Cabin Air Filter Located in a Mazda 3?

What is the method to reset the maintenance reminder for the Ford Kuga?

What brand of transmission is used in the Envision?

What is the horsepower of the Maserati Quattroporte?

How much engine oil does the Captiva require?

What to Do When the Hyundai One-Button Start Doesn't Respond?

What Size Tires Fit 16-Inch Rims?

How to Determine Which National Emission Standard a Vehicle Belongs To?

What is the tire specification for the 2015 V3 Lingyue?