···
Log in / Register

What Causes High Fuel Consumption in the Buick Excelle?

4 Answers
VonSarah
07/30/25 2:47am

The main reasons for high fuel consumption in the Buick Excelle are: 1. Poor fuel flow: Excessive carbon buildup can clog the fuel system, leading to increased fuel consumption. 2. Brake abnormalities: If the brake pads fail to retract properly, the vehicle may remain in a braking state while driving. 3. Spark plug malfunction: Typically, spark plugs need replacement after 20,000-30,000 kilometers. If you notice unusually high fuel consumption, check if the spark plugs are igniting properly. 4. Dirty air filter: Timely replacement of the air filter during vehicle maintenance is crucial, as a clogged filter can restrict airflow and increase fuel consumption.

Was this review help?
10
5
Share
SanPaislee
08/16/25 9:05am

The sudden increase in fuel consumption for the Buick Excelle might first require checking driving habits. Frequent rapid acceleration or constant braking can significantly increase fuel usage, especially in urban traffic jams. Low tire pressure is also crucial—just two weeks ago, my friend’s car had this issue; tire pressure below the standard value increased rolling resistance, leading to higher fuel consumption. Additionally, keeping the air conditioning on constantly has a notable impact on fuel economy, particularly in summer when the compressor demands extra power. Engine carbon buildup is another common issue—after cleaning carbon deposits from my throttle body, my fuel consumption dropped by about 1 L/100km. Excess weight from unnecessary items in the trunk also increases fuel usage, so regular decluttering is recommended to keep the vehicle light.

Was this review help?
2
2
Share
Expand All
StMorgan
10/21/25 8:18am

From a vehicle maintenance perspective, the high fuel consumption of the Excelle may be related to inadequate maintenance. I've encountered situations where aging spark plugs weren't replaced after exceeding 40,000 kilometers, leading to decreased ignition efficiency and a direct surge in fuel consumption. A dirty air filter can also affect air intake efficiency, causing incomplete combustion and naturally higher fuel consumption. Engine oil viscosity being too high or insufficient can similarly have an impact—it's advisable to follow the manual for proper grade replacements. A faulty oxygen sensor prevents the ECU from accurately controlling fuel injection; I've seen cases where sensor failure increased fuel consumption by 20%. Regular inspection of these components can effectively prevent abnormal fuel consumption—don't wait until problems become severe to address them.

Was this review help?
5
3
Share
Expand All
Hannah
12/04/25 8:45am

It's quite common for the Buick Excelle to experience increased fuel consumption in winter. During cold starts, the engine oil viscosity is higher, leading to notably higher fuel consumption for the first 5 kilometers of driving. This is more pronounced during short trips, as the engine is shut off before reaching optimal temperature. The issue of load is often overlooked—last time I went on a road trip with three friends and the trunk was packed with luggage, fuel consumption was 2 liters higher than usual. Fuel quality also plays a role; I once filled up with cheaper gasoline from a small gas station, which caused noticeable engine vibration and increased fuel consumption. In terms of driving habits, coasting in neutral (N gear) on long downhill slopes may seem fuel-efficient but actually consumes more, as the ECU of fuel-injected vehicles automatically cuts fuel supply during coasting.

Was this review help?
1
1
Share
Expand All
More Forum Discussions

What Causes Gear Shifting Jerk in Cars?

Automatic transmission shifting jerkiness may be caused by: transmission clutch pressure leakage; transmission oil circuit blockage or poor flow; transmission fluid not filled to standard; or solenoid valve damage. The engine's power is transmitted through the transmission, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume 10% more fuel than manual transmissions. Whether manual or automatic, more gears mean better fuel efficiency. Below is relevant information: 1. Solenoid valve damage: If sludge in the transmission fluid circulates and blocks the oil passages in the valve body, it can cause shifting jerkiness. Over time, this can lead to transmission overheating, impact, slippage, and other transmission issues. 2. Transmission fluid not filled to standard: Check whether the transmission fluid is filled to the correct level. Both insufficient and excessive transmission fluid can cause this issue. Vehicles with a transmission dipstick can check the fluid level against the standard markings when the engine is running.
15
3
Share

Why is water dripping from the exhaust pipe of the Huansu S5?

Water dripping from the exhaust pipe of the Huansu S5 is a normal phenomenon. After gasoline undergoes complete combustion, it produces carbon dioxide and water vapor. When the water vapor condenses, it forms liquid water, which is discharged through the exhaust pipe once it accumulates to a certain amount. In fact, water dripping from the exhaust pipe is a good sign, as it indicates that at least three conditions are met: 1. The air-fuel mixture ratio is correct: This indicates that the fuel supply system is in good condition. 2. The engine's cylinder pressure is normal: This means there is no internal wear in the engine block, and components such as cylinder liners and sealing rings are functioning properly. 3. The exhaust pipe temperature is low: This shows that the heat generated during combustion is concentrated within the cylinders, with only a small amount escaping into the exhaust pipe, indicating strong engine power output.
13
1
Share

Does the Sagitar come with daytime running lights?

The Sagitar comes standard with daytime running lights across all models. More information about daytime running lights is as follows: 1. Daytime running lights are a new type of signal lamp, mainly used in situations with poor driving visibility. 2. Installing daytime running lights can make the car look cooler, but their primary function is not aesthetics but to improve the vehicle's visibility. 3. Daytime running lights are pollution-free, noise-free, and free from electronic interference, utilizing advanced constant current control technology to provide uniform illumination, rich light color, and long-lasting stability. 4. Daytime running lights have a total power consumption of only 13.5W, with a luminous flux of 70-90LM and a color temperature range of 6000K-6700K.
14
2
Share

How to Properly Start a Manual Transmission Car?

After starting the car, press the clutch pedal completely with your left foot, preparing for the semi-clutch state. Use the palm of your right hand to push and shift the gear lever into first gear as the starting gear. With your left hand, lightly press the turn signal lever downward to activate the left turn signal, alerting vehicles in front and behind. Press and hold the button in front of the handbrake with your right hand, then lift the handbrake and press it down completely to release it. Lift your left foot to the semi-clutch state; when the car begins to vibrate slightly, it indicates sufficient power.
11
3
Share

How Many Chances Are There for the Subject 4 Exam?

There is no specific limit on the number of attempts for the Subject 4 exam, but there is a time constraint. The validity period of the driving skill test permit is three years. If the applicant fails to complete the exam within this period, the results of any previously passed subjects will become invalid. Below are relevant details: 1. Subject 4: Subject 4 separates the requirements related to safe and civilized driving from the original Subject 1, including safe driving skills in complex conditions and emergency handling knowledge, and places it after the "Subject 3" practical road driving test to further assess the candidate's traffic awareness. 2. Exam Content: The main content includes safe and civilized driving operation requirements, safe driving knowledge in adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
10
5
Share

What are the differences between Audi Q8 and Q7?

Here are the differences between Audi Q8 and Q7: 1. Body dimensions: The length, width, and height of the Audi Q8 are 5006mm, 1995mm, and 1695mm respectively; the length, width, and height of the Audi Q7 are 5067mm, 1970mm, and 1731mm respectively. 2. Engine displacement: The Audi Q8 is equipped with a 3.0t turbocharged engine; the Audi Q7 is equipped with a 2.0t turbocharged engine. 3. Maximum horsepower: The Audi Q8 has a maximum horsepower of 340ps; the Audi Q7 has a maximum horsepower of 245ps. 4. Maximum power: The Audi Q8 has a maximum power of 250kw; the Audi Q7 has a maximum power of 180kW.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.