What Causes High Fuel Consumption in the 2013 BMW 5 Series?

1 Answers
LeBrady
07/29/25 5:33pm
BMW 2013 5 Series has high fuel consumption due to brake system failure or severe clutch plate wear. BMW 5 Series Body Dimensions: The BMW 5 Series has body dimensions of 5047-1860-1491mm (length-width-height) with a wheelbase of 2888mm. The trunk capacity is 520 liters. Advantages of the BMW 5 Series: Elegant and stylish exterior; refined interior with excellent craftsmanship and abundant features; spacious cabin. The interior design is generally understated, featuring meticulous craftsmanship and rich configurations, with even and tight panel gaps. The air conditioning performs exceptionally well, while the audio system is average. The steering wheel offers a good grip, and the display controls are user-friendly.
Was this review help?
3
2
Share
More Forum Discussions

Why can't the reversing camera on the VV5 be opened?

1. Camera damage or obstruction: If the camera is damaged, the image cannot be uploaded to the computer, and thus it won't display. In this case, you need to go to a repair shop or a 4S store for maintenance, and if necessary, replace the camera. If it's just blocked by foreign objects, simply remove them. 2. Display screen damage: When the display screen remains black and fails to start or shows distorted images, it is usually damaged. This situation requires inspection and repair at a repair shop or a 4S store. 3. Poor wire contact: If you frequently drive on rough roads, the bumpy environment may cause the internal wires to loosen or detach. When the wire contact is poor, the image from the camera cannot be transmitted to the main unit, and the reversing camera won't display. This requires disassembling the center console panel for inspection. 4. No power: When the car's lights or multimedia system are used for an extended period while the engine is off, the battery may drain. When the power is insufficient or depleted, the car's multimedia system will not function, and the reversing camera won't display. In this case, simply recharge or replace the battery.
16
4
Share

What should be noted when using temporary license plates for new cars?

Temporary license plates for new cars must be affixed to the front and rear windshield without obstructing the driver's view. Regulations for temporary license plates are as follows: Validity period: Temporary license plates have a limited validity period, not exceeding 30 days in general, and no more than 15 days for new cars. Therefore, it is essential to apply for permanent license plates from the vehicle management authority within this period. Driving with expired temporary plates may result in vehicle impoundment and a 12-point penalty. Geographical restrictions: In addition to time limitations, temporary plates also have geographical restrictions. Local temporary plates are only valid within the issuing region, and using them outside this area may lead to penalties. For those frequently traveling long distances or across regions, it is advisable to obtain cross-regional temporary plates. Placement requirements: Typically, there are two temporary license plates, similar in function to permanent ones. However, their placement differs: one must be placed in the lower left or right corner of the front windshield, and the other must be placed in the lower left corner of the rear windshield. Incorrect placement is not allowed.
12
1
Share

What Are the Hazards of a Flooded Car?

Flooded cars are prone to damage in circuits, electrical components, and precision instruments. Here is more relevant information: 1. Hazards of engine flooding: When the water level during wading is higher than the engine air intake, water will directly enter the cylinders, forming a mixture of air and water. Air can be compressed, but water cannot. This means that when the crankshaft pushes the connecting rod to compress toward the piston, the water cannot be compressed, causing the connecting rod to deform and bend under the resistance of the water. If the owner attempts to restart the vehicle after the engine stalls due to water ingress, the immense reverse force will cause the bent connecting rod to rub against the cylinder block, potentially rupturing the engine block instantly, resulting in exorbitant repair costs. 2. Hazards to the interior: When the water level submerges the doors, the interior is likely to get wet. Rainwater is not clean and contains many impurities. The post-flood car interior becomes a highly humid greenhouse environment, which is an ideal breeding ground for mold. If the vehicle is not dried promptly, mold spots can quickly ruin the fabric and leather materials inside your car.
3
0
Share

Can a motorcycle only carry one person?

Some motorcycles can carry two people, while others can only carry one. Relevant legal regulations: Article 55 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" stipulates the following rules for motor vehicle passenger carrying: Highway passenger vehicles must not exceed the approved passenger capacity, except for children exempt from tickets as per regulations. When the passenger capacity is full, the number of exempt children must not exceed 10% of the approved capacity; cargo vehicle compartments must not carry passengers. On urban roads, cargo motor vehicles may carry 1 to 5 temporary workers in the compartment if safe space is reserved; when cargo height exceeds the compartment barriers, no passengers are allowed on the cargo; motorcycles must not carry minors under 12 years old on the rear seat, and light motorcycles must not carry passengers. Specific differences: Motorcycles with blue license plates can only carry the driver, while those with yellow license plates can carry the driver plus one additional passenger.
13
1
Share

Does a Hybrid Car Need the Engine to Run the Air Conditioner?

Hybrid cars require the engine to run the air conditioner. A hybrid electric vehicle, also known as a hybrid vehicle, is equipped with more than one power source: storage batteries, fuel cells, solar panels, or internal combustion engine generators. Currently, hybrid vehicles generally refer to those combining an internal combustion engine generator with a storage battery. Below are the functions of a car air conditioner: 1. Temperature regulation: This is the primary function of a car air conditioner. In summer, the cooling system produces cold air to lower the temperature inside the car; in winter, except for large commercial vehicles that use independent combustion heaters, most vehicles utilize waste heat from the engine for heating. 2. Humidity regulation: Humidity significantly affects passenger comfort. The humidity inside the car should generally be maintained between 30% and 70%. Standard car air conditioners do not have the capability to regulate humidity; this is only possible through ventilation systems or advanced luxury cars equipped with integrated heating and cooling systems. 3. Airflow regulation: The speed and direction of airflow greatly influence comfort. If air is blowing directly, the speed should be limited to a certain range when the temperature is appropriate. The airflow speed can be adjusted based on passengers' living environment, age, health, and temperature preferences. 4. Air purification: The quality of air inside the car is crucial for comfort.
11
0
Share

Which gear to use for hill start?

Use first gear for hill start. Key points: Upon hearing the "hill start and stop" instruction, immediately turn on the right turn signal and steer towards the right side of the area; when approaching the roadside, slightly turn the wheel left, then quickly straighten it right to keep the car parallel to the roadside within 50cm (using the white line at the front parking spot as a reference, do not cross the white line); depress the clutch and slowly approach the stopping point. When the small rearview mirror on the right hood aligns with the stop sign, press the foot brake, stop, pull the handbrake (until two clicks are heard), and turn off the turn signal; before starting, shift to first gear, turn on the left turn signal, and honk once; slowly release the clutch while holding the handbrake lever ready to start; when the car body vibrates or gear engagement sounds are heard, release the handbrake, and the car will move forward (some instructors may use the technique of slowly releasing the clutch while pressing the accelerator to start, with the same result in the road test). Test purpose: To assess the driver's ability to operate the vehicle on a slope, accurately judge the vehicle's position, and correctly use the brake, gear, and clutch to meet the needs of stopping and starting on an uphill section.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.