···
Log in / Register

What Causes High Carbon Monoxide in Exhaust?

1 Answers
SanCatherine
07/24/25 8:05pm

There are several main reasons for high carbon monoxide levels in vehicle exhaust: 1. Sensor malfunction: Faulty sensors that control and stabilize the air-fuel ratio can cause excessive gasoline injection, resulting in insufficient air for combustion. This leads to incomplete combustion of gasoline, increasing carbon monoxide levels in the exhaust. 2. Clogged or dirty catalytic converter: This can impair the converter's ability to transform carbon monoxide, requiring cleaning or replacement of the catalytic converter. 3. Excessive carbon buildup: Simply cleaning the carbon deposits to ensure complete fuel combustion and prevent carbon buildup in the engine can significantly reduce carbon monoxide levels in the exhaust.

Was this review help?
14
1
Share
More Forum Discussions

Why Must Brake Fluid Be Replaced?

When a vehicle is driven for extended periods with frequent braking, the temperature of the braking system rises, which can lead to the formation of vapor lock in the brake lines. This occurs when air is compressed, resulting in reduced braking force or even brake failure. Therefore, to ensure driving safety, brake fluid must be replaced regularly. Here is some information about automotive brake fluid: 1. Automotive brake fluid has a very low freezing point, ensuring good fluidity even in low-temperature conditions. 2. Automotive brake fluid has an extremely high boiling point, preventing vapor lock formation under high-temperature conditions. 3. Automotive brake fluid undergoes minimal quality changes and does not cause corrosion to metals or rubber. 4. Brake fluid is composed of refined diesel distillates combined with thickeners and antioxidants. There are three types: diesel-based brake fluid, alcohol-based brake fluid, and synthetic brake fluid. Brake fluid must have excellent viscosity-temperature properties to operate effectively across a wide range of temperatures, including low temperatures. It should also possess good oxidation stability, anti-foaming properties, resistance to rubber swelling, and anti-rust properties.
15
1
Share

What Causes Interior Noise in Cars?

It may be due to prolonged use of the car, leading to aging of internal components, which results in noise. Below is a related introduction: 1. Introduction to Car Interiors: What is referred to as car interiors in China is actually the Interiors System in English. Since this part of automotive components has a certain decorative function, it is commonly translated as "car interiors" in the industry. However, from the English term "Interiors," it can be understood that these components not only serve a decorative purpose but also involve a wide range of functional, safety, and engineering attributes. 2. Classification of Car Interiors: Automotive Interiors mainly refer to the products used for internal modifications of cars, covering various aspects of the car's interior, such as steering wheel covers, seat cushions, floor mats, car perfumes, hanging ornaments, interior decorations, storage boxes, etc., all of which are considered automotive interior products.
1
3
Share

Can the car air conditioner cool without ignition?

Ordinary fuel-powered cars cannot provide cooling because their air conditioning systems rely on the engine to operate. If the car is not started, the air conditioner cannot be used. However, electric vehicles can run the air conditioner and provide cooling even when the car is not started. Here are some details about car air conditioning systems: 1. Introduction 1: The car air conditioning system is designed to cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. Different types of air conditioning systems have varying layouts. 2. Introduction 2: Most passenger cars use an integrated heating and cooling air conditioning system. The layout typically combines the evaporator, heater core, centrifugal blower, and control mechanisms into a single unit, known as the air conditioning assembly. 3. Introduction 3: The car air conditioning controller is a control device for the car air conditioning system, regulating functions such as cooling, ventilation, and defrosting. All components are securely installed, with flexible and smooth operation of control devices and mechanisms, ensuring safe and reliable performance.
8
3
Share

What is the ground clearance of the BMW X7?

Standard ground clearance is 135mm, with the default Comfort mode at 135mm and Sport mode at 125mm. Here is some related information about BMW: 1. Introduction: BMW (Bavarian Motor Works), fully known in Chinese as Bayerische Motoren Werke AG, is a German luxury automobile brand. BMW's vehicle series include i, X, Z, and pure numeric models, along with series such as 1, 2, 3, 4, 5, 6, 7, and 8, plus the M series (BMW's official high-performance modification division) based on improvements to these series. BMW was founded in 1916 and is headquartered in Munich, Bavaria, Germany. The blue and white BMW logo reflects the colors of the Bavarian state flag where BMW is headquartered. 2. Logo Meaning: BMW stands for Bavarian Motor Works, and the colors and design of the logo are derived from the Bavarian state coat of arms. BMW initially started by producing aircraft engines, leading many to believe the logo represents a rotating propeller, but this is not the case. In fact, the symmetrical blue and white pattern simply represents the Bavarian state coat of arms, symbolizing BMW's pure Bavarian heritage.
17
3
Share

Has the Cylinder Scoring Issue Been Resolved in the 2021 Hyundai ix35?

The older ix35 models commonly experienced cylinder scoring issues, but this problem has been resolved in the newer models. Below are the causes of cylinder scoring and its potential hazards: Causes of Cylinder Scoring: If the end gap, side clearance, or back clearance of the piston rings is too small, the piston rings may expand and seize due to heat during engine operation, pressing tightly against the cylinder wall. Alternatively, if the piston rings break, they can easily gouge deep grooves into the cylinder wall. Hazards of Cylinder Scoring: Cylinder scoring is one of the common faults in car engines. The so-called "cylinder scoring" refers to deep grooves being scraped into the cylinder wall, causing the piston and piston rings to lose their sealing ability when rubbing against the cylinder wall. This results in reduced cylinder compression pressure and loss of power. The downward leakage of the combustible mixture increases the crankcase pressure, which can lead to a crankcase explosion in severe cases. Additionally, engine oil may be forced upward into the cylinder, causing oil burning. Other symptoms include severe smoke from the exhaust pipe, abnormal engine noise, and engine malfunction or even stalling.
2
0
Share

How Far Can You Drive When the Fuel Warning Light Turns Yellow?

Normally, when the fuel warning light turns yellow, the vehicle can still travel 30-60 kilometers. Here are the specific details about driving after the fuel warning light comes on: 1. Generally, when the fuel warning light turns yellow, there is about 1/10 of the gasoline left in the tank. The fuel tank capacity of ordinary sedans is usually between 40-60L, while that of ordinary SUVs is between 50-60L. Based on the remaining 1/10 fuel calculation, when the fuel warning light comes on, a sedan typically has about 4-6L of gasoline left, and an SUV has about 5-6L left. 2. Since driving habits vary and the road conditions differ, poor driving habits, prolonged idling, and frequent stops can all increase fuel consumption. Conservatively estimating, if the fuel warning light is already on, the vehicle can generally travel about 30-50 kilometers.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.