What Causes Gear Shifting Jerkiness in Lavida?

2 Answers
SanJoshua
07/28/25 4:37pm
Damaged solenoid valves are a major cause of jerky shifting. Below are the relevant details: 1. Symptoms of a faulty solenoid valve: Check for poor power wiring connections; Verify that the power voltage is outside the operating range; Inspect for coil desoldering; Check for coil short circuits; Ensure the working pressure difference is inappropriate; Monitor for excessively high fluid temperature; Look for impurities causing the main valve core and moving iron core to jam; Note if the liquid viscosity is too high, the frequency is excessive, or the service life has expired. 2. Solenoid Valve: The solenoid valve contains a sealed chamber with through-holes at different positions, each connected to different oil pipes. In the middle of the chamber is a piston, with electromagnets on both sides. The valve body is attracted to whichever side's magnetic coil is energized, controlling the movement of the valve body to open or close different oil discharge holes. The oil inlet hole remains normally open, using oil pressure to drive the cylinder's piston, which in turn moves the piston rod, thereby actuating mechanical devices.
Was this review help?
20
3
Share
DiOlive
08/11/25 11:24pm
After years of car experience, gear shift jerking in the Lavida's automatic transmission is quite common. Causes include aging or insufficient transmission fluid, degraded oil quality affecting hydraulic performance, leading to rough shifting. Solenoid valve or control unit failures are also possible, with clutch plate wear in dual-clutch models being a frequent issue, causing noticeable jerking during acceleration or deceleration. On the software side, the system may need updates or ECU data reset. Poor maintenance worsens the situation, such as never changing the fluid or aggressive driving. Prevention strategies include regular fluid checks, changing every 50,000 km with OEM-specified fluid, and seeking professional diagnosis at the first sign of jerking to avoid costly transmission overhauls, which impact safety. Safety first—don’t delay.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

How many cylinders does the Fengguang S560 engine have?

The Fengguang S560 is equipped with a four-cylinder engine, offering two engine options in total. One is a 1.5T turbocharged engine with a maximum power of 110kW and a maximum torque of 220Nm, paired with either a 6-speed manual or CVT transmission. The other is a 1.8L naturally aspirated engine with a maximum power of 102kW and a maximum torque of 187Nm, matched with either a 5-speed manual or CVT transmission. The Fengguang S560 measures 4560mm in length, 1815mm in width, and 1735mm in height, with a wheelbase of 2690mm. The vehicle features front-wheel drive, with a MacPherson strut front suspension and a five-link coil spring rear suspension.
13
2
Share

What is the 0-100 km/h acceleration time of the Audi A6L?

Among the four engine options of the Audi A6L (2.0T, 2.5, 2.8, and 3.0T), the 0-100 km/h acceleration time is 8.51 seconds. Definition of 0-100 km/h acceleration: It refers to the time it takes for a car to accelerate from 0 to 100 kilometers per hour. Purpose of 0-100 km/h acceleration: It is used to more intuitively reflect the difference in a car's power performance. The shorter the 0-100 km/h acceleration time, the stronger the power, and consequently, the more expensive the car will be. Generally, most cars have a 0-100 km/h acceleration time of around 10 seconds. Cars that can achieve a 0-100 km/h acceleration time within 5 seconds are usually luxury supercars.
20
1
Share

What is the reason for the failure of the car central locking system?

The failure of the car central locking system is mainly caused by malfunctions in the door lock actuator and the door lock controller. If this situation occurs, the car owner should promptly take the vehicle to a repair shop for inspection. The fault information can be quickly detected using a diagnostic tool. Below are some additional details: Central Control: When the driver locks the door next to them, all other doors are simultaneously locked. The driver can use the door lock switch to open all doors at once or open a specific door individually. Speed Control: When the vehicle reaches a certain speed, all doors automatically lock to prevent passengers from accidentally opening the doors by operating the door handles. Individual Control: In addition to the door next to the driver, other doors are equipped with separate spring lock switches, allowing independent control over the locking and unlocking of each door.
4
5
Share

What are the reasons for the engine warning light in the Buick Regal?

Buick Regal engine warning light may illuminate due to the following reasons: Substandard exhaust emissions: Issues such as poor fuel quality, failed catalytic converter, excessive carbon buildup in the intake manifold, clogged fuel injectors, faulty oxygen sensors, or occasional engine misfires can trigger the engine warning light. Among these, poor fuel quality is the most common cause. Poor engine system performance: The warning light may also illuminate due to malfunctions in components like the throttle pedal sensor, throttle position sensor, mass airflow sensor, crankshaft position sensor, or poor electrical connections. Transmission system issues in some vehicles: Certain transmission system problems, such as internal faults, slippage, or overheating, may also be indicated by the engine warning light.
6
3
Share

What are the reasons for normal engine shutdown?

Reasons for normal engine shutdown: The car key is in the OFF position of the ignition switch. Normal engine shutdown is achieved by short-circuiting the spark plugs, as the engine operates by spark plug ignition. Turning the key to shut off the engine essentially shorts the high-voltage electricity supplied to the spark plugs, causing the engine to stop. Working principle of engine shutdown: 1. After the ignition is turned off, the ECU shuts down and no longer controls spark plug ignition or fuel injector operation; 2. When the ignition switch is in the ON position, the ECU powers on and supplies electricity to various sensors required for engine operation to prepare them for work. The fuel pump then operates for several seconds to build up oil pressure for normal fuel injection; 3. When the key is turned to the OFF position, it cuts power to the starter motor. At this point, the starter stops running, and the crankshaft ceases to drive the pistons in reciprocating motion, thereby achieving engine shutdown.
13
4
Share

Will I Be Penalized for Driving in the Wrong Variable Lane?

Driving in the wrong variable lane will result in penalties. Changing lanes or turning incorrectly is considered driving outside the designated lane. Additional details are as follows: 1. Penalty: At intersections with marked lanes, vehicles must enter the lane corresponding to their intended direction of travel. Violations are subject to a fine of 100 RMB and a deduction of 2 points under Article 90 of the Traffic Safety Implementation Regulations. 2. Correct Route: When passing through signal-controlled intersections with marked lanes, vehicles must enter the lane corresponding to their intended direction of travel. For example, if a vehicle proceeding straight enters a left or right turn lane, electronic surveillance will immediately capture the violation. 3. Types of Violations: There are three main types of violations for not driving in the designated lane: first, proceeding straight from a left-turn lane; second, turning left from a straight lane; and third, making a right turn arbitrarily from either a left-turn or straight lane.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.