What Causes Frequent Fogging in Mercedes-Benz Cars During Summer?

1 Answers
OLeah
07/30/25 3:29am
Mercedes-Benz cars frequently fog up in summer due to the high rainfall during this season. When it rains, the temperature drops, making the outside temperature lower than inside the car. Additionally, the air humidity inside the car increases during the rainy season. The water vapor inside the car condenses into tiny droplets on the glass when it encounters the cold surface, forming the 'fogging' phenomenon on the inner surface of the glass. Methods to Remove Fog: The quickest method is using the air conditioning system to defog. Clearing fog from the windshield is straightforward—the air conditioning system is the most common and effective solution, with just one press of a button. Things to Note: Removing fog from the windows is simple; just select the appropriate air conditioning setting to blow air and defog. However, the question is whether to use cold or warm air. Both cold and warm air have their own advantages and disadvantages.
Was this review help?
6
1
Share
More Forum Discussions

What is the function of the clutch operating mechanism?

The function of the clutch operating mechanism is: 1. To gradually increase the driving force of the car, allowing for smooth starting; 2. To temporarily separate the engine and transmission for gear shifting; 3. To prevent overload of the transmission system; 4. To reduce torsional vibration impact from the engine and prolong the service life of transmission gears. Severe clutch wear can lead to: 1. Car slipping and insufficient power; 2. Difficulty in starting the car and ignition problems; 3. Poor climbing performance and increased fuel consumption. The working principle of the clutch is: 1. When the inner ring is fixed, the outer ring can rotate freely clockwise as the wedge block does not lock; 2. When the outer ring rotates counterclockwise, the wedge block locks, preventing the outer ring from rotating.
2
1
Share

Does the Volkswagen Lavida have front and rear anti-collision beams?

The Volkswagen Lavida is equipped with front and rear anti-collision beams. The anti-collision beams are U-shaped channels made of cold-rolled steel plates, connected to the frame longitudinal beams, serving as safety devices to absorb and mitigate external impact forces and protect the front and rear parts of the vehicle. The body dimensions of the Volkswagen Lavida are: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, minimum ground clearance 135mm, and curb weight 1210kg. The Volkswagen Lavida is powered by a 1.5L naturally aspirated engine, with a maximum horsepower of 113PS, maximum power of 83kW, maximum torque of 145Nm, and is paired with a 5-speed automatic manual transmission.
2
4
Share

What is the warning light with an exclamation mark inside a triangle?

An exclamation mark inside a triangle is a general warning light indicating common faults such as: overheating of the dry dual-clutch transmission, intervention or malfunction of the fuel cut-off system, parking sensor failure, exterior bulb failure, engine oil pressure sensor failure, and traction control system warning or malfunction. Solutions for when the general warning light illuminates include: 1. Check if the engine oil pressure sensor is malfunctioning; 2. Check if the traction control system is malfunctioning; 3. Check if the fuel cut-off system is malfunctioning; 4. Check if the dry dual-clutch transmission is overheating. The appearance of an exclamation mark in the vehicle indicates that there is a fault or abnormality that could affect driving safety and damage the vehicle, necessitating inspection and repair.
5
5
Share

How long does it take to charge a depleted car battery?

It takes about 20 hours to charge a depleted car battery. The main causes of battery depletion are: 1. A damaged alternator that fails to charge the battery; 2. Electrical appliances in the vehicle being left on; 3. Short circuits in the vehicle's wiring. Battery maintenance methods include: 1. Starting the car periodically to charge the battery; 2. Adding distilled water or specialized replenishing fluid when electrolyte levels are low; 3. Regularly checking if the vent holes on the battery cover are clear; 4. Inspecting the battery terminals for signs of oxidation; 5. Checking all parts of the electrical circuit for aging or short circuits; 6. Turning off all electrical devices when leaving the car.
13
0
Share

What type of brake does the Dongfeng Fengshen AX3 use?

The Dongfeng Fengshen AX3 is equipped with ventilated disc brakes. Its body dimensions are 4520mm in length, 1740mm in width, and 1562mm in height, with a wheelbase of 2620mm and a minimum ground clearance of 135mm. The trunk capacity is 708 liters. It features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. The Dongfeng Fengshen AX3 is powered by a 6.0L twin-turbocharged V12 engine, delivering a maximum horsepower of 730PS, a peak power output of 750kW, and a maximum torque of 1000Nm. It is paired with a 7-speed sequential single-clutch transmission.
7
5
Share

How to Remove Glue from Car Paint?

To remove glue from car paint, follow these steps: 1. Apply a hot towel to the glued area on the car paint; 2. Spray cleaning agent or glue remover onto the glued area; 3. Let it sit for one minute; 4. Carefully wipe the glue off the car paint with a sponge cloth until the glued area is completely clean. Precautions for glue on car paint: 1. Clean the glue on the car paint promptly upon discovery; 2. Rinse off the cleaning agent thoroughly after washing the car body; 3. Avoid using excessive force or rashly applying carburetor cleaner, gasoline, or banana oil for cleaning. Glue on car paint can affect the vehicle's appearance and cause the paint to corrode and peel off.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.