What Causes Fogging on the Passenger Side Window?

2 Answers
LeGenevieve
07/25/25 3:34pm
Due to the temperature difference between the inside and outside of the car, the windows are prone to fogging. This happens because the temperature of the window glass in contact with the outside is lower, causing the water vapor inside the car to condense on the glass, forming fog. Methods to clear window fogging: Allow the car to fully adjust to the higher outside temperature; once the moisture evaporates, fogging will naturally stop. When parked, open all doors and windows, and the issue will quickly be alleviated. Ventilate by opening windows: If you're in a hurry to drive, simply open the windows to allow air circulation. The wind will quickly remove the moisture stored in the garage, and the fog will dissipate naturally within a few minutes. Use anti-fogging products: Nowadays, there is a wide variety of car accessories available, and anti-fogging products are no exception. So, keep a bottle handy and spray it before heading out to naturally prevent fogging.
Was this review help?
9
1
Share
OSophie
08/11/25 9:28pm
That day when I was driving my friend home, I encountered fogging on the passenger side window. Essentially, it's caused by the temperature difference between the inside and outside of the car. When the heater is on, the glass is colder than the interior, and the moisture from our breath condenses on it. The passenger side window is closer to the person, so every breath the passenger takes can cause fogging. Another scenario is when the air conditioning vents aren’t adjusted properly—if the air is blowing directly at the windshield, the side windows are more prone to fogging. Later, I found that keeping a dry cloth handy works well. Wiping the inside of the windows before driving can prevent fogging. If fogging does occur, switching to the external air circulation or slightly opening a window to let the moisture out works immediately.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

What is the oil called for the first car maintenance?

For the first car maintenance, standard original equipment manufacturer (OEM) oil is used, without any special designation. Whether it's the first maintenance or subsequent regular maintenance, this type of oil is employed. "OEM engine oil" is essentially engine oil products manufactured by oil companies according to the requirements of automobile manufacturers. Introduction to car maintenance: 1. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing.
17
1
Share

Can parallel imported cars be serviced at 4S stores?

Parallel imported cars can be repaired at designated 4S stores through insurance companies. The warranty for parallel imported cars is underwritten by a third party, which is an insurance policy purchased separately by the buyer at the time of purchase. When problems arise with the vehicle, the third-party platform can provide basic maintenance, professional repairs, and comprehensive repair services. Below are specific details about parallel imported cars: 1. Parallel import car dealers do not actively provide after-sales services and insurance, with only a very few dealers offering these services in a complete manner. Currently, parallel imported cars are provided with three-guarantee and after-sales services by dealers, or insurance companies are introduced to provide these services. 2. Parallel imported cars are relatively cheaper, but the biggest drawback is that they do not enjoy the same treatment as normally imported cars in the domestic market, meaning they do not benefit from the national three-guarantee policy and the brand's promised after-sales maintenance. 3. After the launch of the parallel import car pilot program, there will be two channels to ensure that parallel imported cars receive the same treatment as 4S store imported vehicles. One is the establishment of comprehensive service brand centers specifically for parallel imported cars sold in free trade zones, providing services including licensing, insurance purchase, tax payment, and repairs. The other is to fully utilize existing resources by allowing some 4S stores and social vehicle repair shops to also join in providing services.
13
4
Share

What is the fuel consumption of the Kia Sportage?

1.4t models have a fuel consumption of approximately 10 liters per 100 kilometers, while 2.0L models consume about 8.9 liters per 100 kilometers. The Sportage is a compact SUV under the Kia brand, equipped with two engines: a 1.4-liter turbocharged engine and a 2.0-liter naturally aspirated engine. Below are some details about the Sportage: 1. The 1.4-liter turbocharged engine, codenamed G4LD, has a maximum power output of 103kw, a maximum torque of 242 Nm, reaches its maximum power at 6000 rpm, and achieves peak torque at 3200 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. The 2.0-liter naturally aspirated engine delivers a maximum power of 118kw, a maximum torque of 193 Nm, reaches its maximum power at 6500 rpm, and achieves peak torque at 4800 rpm. This engine employs multi-point fuel injection technology and also uses an aluminum alloy cylinder head and block. It is matched with either a 6-speed manual transmission or a 6-speed automatic transmission. The front suspension of this vehicle uses a MacPherson strut independent suspension, while the rear suspension utilizes a multi-link independent suspension.
4
1
Share

Which city does the license plate Min D belong to?

Min D is the license plate for Xiamen, Fujian. Below are the license plate codes for other cities in Fujian Province: 1. Min A is for Fuzhou City. 2. Min B is for Putian City. 3. Min C is for Quanzhou City. 4. Min E is for Zhangzhou City. 5. Min is for Longyan City. 6. Min G is for Sanming City. 7. Min H is for Nanping City. 8. Min is for Ningde City. 9. Min K is for the provincial system and Pingtan Comprehensive Experimental Zone. Related information is as follows: 1. License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of a vehicle. 2. The materials typically used are aluminum, iron, plastic, or paper, on which the vehicle's registration number, registration region, or other relevant information is engraved. 3. License plates serve as a numbering and information registration system for vehicles. Their primary function is to identify the region to which a vehicle belongs, and they can also be used to look up the vehicle's owner and registration information.
10
5
Share

Can Modified Seats Pass the Annual Inspection?

Modifying car seats can generally pass the annual inspection as long as the number of seats and their layout remain unchanged. The vehicle's seating capacity is fixed and cannot be altered. Additionally, the method of seatbelt usage must not be modified. For instance, if you install professional racing seats with four-point harnesses, they will definitely fail the inspection. Introduction to Vehicle Annual Inspection: 1. The vehicle annual inspection refers to an annual examination conducted on vehicles that have already obtained official license plates and registration certificates, based on the safety technical conditions for motor vehicle operation. 2. The purpose of the vehicle annual inspection is to check the main technical conditions of the vehicle, encourage better maintenance, ensure the vehicle is always in good condition, and guarantee driving safety.
14
2
Share

What brand is SUM?

SWM is the brand name of SWM Motors, and its models include: SWM X7, SWM X3, SWM G01, SWM G05, SWM X2, etc. Here are some relevant details: 1. Taking the 2021 SWM G01 as an example, it is a compact SUV with body dimensions of 4610mm in length, 1855mm in width, and 1740mm in height, a wheelbase of 2750mm, a fuel tank capacity of 52 liters, and a curb weight of 1520kg. 2. The 2021 SWM G01 is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 143 PS, a maximum power of 105 kW, a maximum torque of 190 Nm, and is paired with a 5-speed manual transmission.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.