What Causes Excessive Resistance in the Driver's Seat Belt Pretensioner?

1 Answers
RafaelAnn
07/30/25 8:46am
Excessive resistance may indicate an open circuit, wiring issues, or problems with the tensioner. You can disconnect the electrical connector of the tensioner, use a wire to short-circuit it, and clear the fault code. Here are the relevant details: Possible causes: If the fault code changes to indicate low resistance, it suggests an issue with the tensioner. If the resistance remains high, disconnect the ECU's electrical connector and use a multimeter to check the continuity of the two wires. If the wiring is intact, the issue may lie with the ECU. Another possibility is poor contact in the tensioner's connector. Pretensioner seat belts: Pretensioner seat belts, also known as pre-retracting seat belts, are designed to tighten the webbing instantly during a collision before the occupant moves forward, securing them firmly to the seat. The belt then locks to prevent the occupant from leaning forward, effectively protecting their safety. The retractor in a pretensioner seat belt differs from that in a standard seat belt. In addition to the standard retractor's function of extending and retracting the webbing, it can also increase the restraining force on the occupant within approximately 0.1 seconds when the vehicle speed changes drastically. Therefore, it includes a control device and a pre-tensioning mechanism.
Was this review help?
10
4
Share
More Forum Discussions

What kind of paint is used for engine painting?

Engines are heat-generating bodies and cannot be painted. Here is some information about engines: 1. Introduction: An engine (Engine) is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. Engines can refer to both the power-generating device and the entire machine including the power unit (e.g., gasoline engines, aircraft engines). The engine was first developed in the UK, so the concept of the engine also originates from English, with its original meaning referring to "a mechanical device that generates power." 2. External Combustion Engine: An external combustion engine means that its fuel burns outside the engine. It was invented in 1816 by R. Stirling of Scotland, hence it is also called a Stirling engine. The engine converts the thermal energy generated by this combustion into kinetic energy. The steam engine improved by Watt is a typical example of an external combustion engine. When a large amount of coal burns to generate heat, it heats water into a large amount of steam, creating high pressure. This high pressure then drives mechanical work, completing the conversion of thermal energy into kinetic energy.
3
1
Share

How many kilometers should a Volkswagen be serviced after the first maintenance?

After the first maintenance, a Volkswagen vehicle needs to be serviced every 20,000 kilometers. The following is expanded content about maintenance: Maintenance items: Replace engine oil and oil filter, clean the air filter, check whether the generator belt and wiper blades are damaged; whether the levels of various fluids are normal; whether the tire pressure is normal, and whether there is uneven wear, bulging, or damage to the tires; the car chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; whether all switches and lights in the car are working properly. Maintenance precautions: Make an appointment in advance; record any faults or questions encountered while driving and inform the staff during maintenance registration.
12
0
Share

What is the difference between A-class and B-class cars?

A-class and B-class cars differ in the following aspects: 1. Vehicle type: A-class cars are referred to as compact cars; B-class cars are referred to as mid-size cars. 2. Wheelbase: A-class cars typically have a wheelbase ranging from 2550 to 2700mm; B-class cars usually have a wheelbase between 2700 and 2850mm. Vehicle classifications can be further divided into six levels: A00, A0, A, B, C, and D, based on parameters such as wheelbase, engine displacement, and weight. China also has its own classification standards, categorizing vehicles into micro cars, small cars, compact cars, mid-size cars, full-size cars, and large cars. SUVs follow a similar classification system.
18
2
Share

How Many Degrees Does the Steering Wheel Turn Correspond to the Wheels?

Turning the steering wheel one full rotation results in the wheels turning approximately 25 degrees. Below is an introduction to the steering wheel: 1. Introduction: A wheel-shaped device used to control the direction of vehicles such as cars, ships, and airplanes. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. 2. Function: The steering wheel is generally connected to the steering shaft via splines. Its purpose is to transform the force exerted by the driver on the edge of the steering wheel into torque, which is then transferred to the steering shaft. Using a larger-diameter steering wheel reduces the amount of hand force required from the driver when turning. The steering intermediate shaft, acting as a connector between the steering gear and the steering shaft, facilitates the standardization of steering gears, compensates for errors during manufacturing and installation, and ensures a more rational installation of the steering gear and steering wheel in the vehicle.
18
4
Share

Where is the air filter location for the Venucia T70?

Venucia T70's air filter is located beside the front passenger's left leg area. There is a cover panel on the left side without screws, which can be directly opened by hand to reveal a rectangular slot where the air filter is installed. The car's air filter is a crucial component in the air conditioning system and requires regular replacement. Most vehicles need to replace it every 10,000 kilometers. The dimensions of the Dongfeng Venucia T70 are 4630mm in length, 1845mm in width, and 1653mm in height. The Dongfeng Venucia T70 is equipped with Nissan's HR16DE 1.6L naturally aspirated engine and MR20DE 2.0L naturally aspirated engine.
9
0
Share

What is the difference between Brembo's red and black brake pads?

Brembo's red and black brake pads differ in their production origin: the red brake pads are domestically produced, while the black ones are imported. Brake pads, also known as brake linings, are critical safety components in a vehicle's braking system. The effectiveness of all braking performance is decisively influenced by the brake pads. Brake pads are typically composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust. Brembo is the owner of the Brembo, Breco, Bybre, Marchesini, and Sabelt brands. Brembo is a leading brand in the design and manufacturing of high-performance braking systems for cars, motorcycles, and commercial vehicles.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.