What Causes Excessive Noise Inside the Car?

What are the functions of the three pedals in a car?

The three pedals in a car are the clutch, accelerator, and brake. The following is an introduction to the clutch: 1. Introduction: The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. 2. Principle: During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the power input from the engine to the transmission. 3. Requirements: The basic requirements for the clutch include smooth engagement, quick and thorough separation; easy adjustment and repair; small external dimensions; light weight; good wear resistance and sufficient heat dissipation capacity; easy and labor-saving operation. Commonly used clutches are divided into two types: jaw type and friction type.

1

3

Share

How many Octavia RS cars are there in China?

Octavia RS is a limited-edition model, with a total of 2,000 units nationwide. Related introduction: 1. Engine: The Octavia RS is equipped with a 2.0TSI engine, one of the world's top ten engines, paired with the world's most advanced 6-speed DSG dual-clutch automatic transmission. It delivers a maximum torque of 280Nm and a maximum power of 147KW (equivalent to 200 horsepower). The top speed reaches 235km/h, with a 0-100km/h acceleration time of just 7.7 seconds, and a combined fuel consumption of 8.0L per 100km. 2. Design: It features a redesigned exterior rearview mirror with an enlarged housing and increased mirror area, providing drivers with a wider rearview angle. Additionally, the new model comes with 16-inch aluminum alloy wheels and adds metal pedal trim strips across the lineup.

3

2

Share

What to Do with ETC When Selling a Car?

If you sell your car but keep the original license plate number, you can remove the ETC device from the original car, reactivate it once, and then install it in the new car for continued use. If you no longer need the license plate number, the original ETC must be canceled. To cancel the ETC, you need to bring the vehicle registration certificate, driver's license, ID card, ETC pass card, and the bank card used for ETC. The ETC installation process is as follows: Upon receiving the device, first check whether the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid, Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then peel off the protective film on the back of the OBU adhesive and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield. The chip should be inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Cost-saving: Reduces expenses, decreases the frequency of vehicle starts and brakes, lowers wear and fuel consumption, and users can also enjoy a 5% discount on toll fees; Improved efficiency: The ETC lane can theoretically increase vehicle passing efficiency by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

12

5

Share

What does PCV mean on a car?

PCV on a car stands for Positive Crankcase Ventilation. Here is an introduction to PCV: 1. Introduction: The PCV valve, or Positive Crankcase Ventilation, means the active ventilation control system for the crankcase (or oil pan) in Chinese. It is a metering control valve installed between the engine crankcase ventilation system and the intake system. 2. Components: The PCV system mainly consists of ventilation hoses and the PCV valve. Typically, one ventilation hose connects the air cleaner to the valve cover, while another connects the PCV valve to the intake manifold. The PCV valve is composed of a plunger-type valve and a spring, located on one side of the intake manifold. The vacuum level in the intake manifold determines the opening and closing of the PCV valve, as well as the degree of opening, which in turn determines the amount of blow-by gases that are re-introduced into the intake manifold for combustion. 3. Function: Its main role is to direct gases from the crankcase into the intake manifold via the PCV valve, with a small amount of air entering the intake manifold directly from the air cleaner through the PCV valve. This prevents issues such as icing at the throttle, incomplete combustion, and worsened emissions, while also preventing blow-by gases from entering the atmosphere and keeping the engine oil from deteriorating.

5

Share

Can the rear window of the Ora Black Cat be raised and lowered?

No, the rear window of the Ora Black Cat adopts a snap-fit design, so it cannot be raised or lowered. Additionally, the Ora Black Cat does not feature one-touch window control across its entire lineup. Introduction to the Ora Black Cat: 1. Exterior: The Ora Black Cat features minimalist design elements, including LED daytime running lights and integrated door handles. The front fascia adopts a dual-round headlight design with a closed-off grille, while the lower air intake and LED daytime running lights also incorporate rounded rectangular elements. The rear end continues the front's rounded and cute styling, with a layered appearance. 2. Dimensions: The Ora Black Cat measures 3495mm in length, 1660mm in width, and 1530mm in height, with a wheelbase of 2475mm. The wheelbase-to-length ratio exceeds 70%, enabling the Ora Black Cat to achieve class-leading front and rear cabin space. 3. Powertrain: The long-range model is equipped with an electric motor delivering a maximum power of 45kW and peak torque of 130Nm, offering a maximum range of 405km. Additionally, the entry-level model with a 301km range and the mid-range model with a 351km range both feature an electric motor with a maximum power of 35kW and peak torque of 125Nm.

17

1

Share

What is the original engine oil model for Geely Boyue?

Geely Boyue's original engine oil model is 5W-40, and the official use is Shell's semi-synthetic oil. If you need to change the oil during later maintenance, you can choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under low and high-temperature conditions. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the value, the better it can maintain viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Geely Boyue is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain; Use a special wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover, generally filling about three-quarters of the oil bottle; Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check if the engine oil level is within the standard range.

3

4

Share

What Causes Excessive Noise Inside the Car?

What are the functions of the three pedals in a car?

How many Octavia RS cars are there in China?

What to Do with ETC When Selling a Car?

What does PCV mean on a car?

Can the rear window of the Ora Black Cat be raised and lowered?

What is the original engine oil model for Geely Boyue?

How many days does it usually take to pick up a Magotan after ordering?

Where is the Land Rover Range Rover produced?

What is the tire code?

What is the low-pressure value of automotive air conditioning R134a?