What Causes Excessive Noise in Sedans?

3 Answers
ChristianDella
07/25/25 8:12am
The reasons for excessive noise in sedans are: 1. Carbon buildup in the engine; 2. Shock absorber failure; 3. Spark plug carbon buildup; 4. Tire aging; 5. Internal damage to the valve guide; 6. Cooling system failure; 7. Poor quality engine oil; 8. Engine misfire; 9. Large gaps in the cabin or vehicle body. Solutions for excessive car noise include: 1. Applying sound-absorbing foam material under the engine hood; 2. Installing sound-absorbing cotton material in the trunk, at the bottom of the trunk, and on the wheel arches on both sides of the trunk; 3. Installing professional damping plates in areas prone to noise; 4. Adding sealing strips inside the doors; 5. Replacing tires.
Was this review help?
19
5
Share
VonCamilla
08/11/25 1:43pm
There are quite a few reasons for loud noise in sedans. Worn-out tires or insufficient tire pressure can cause significant noise, making it sound like driving on a rough road. An aging engine with excessive carbon buildup can produce a humming sound, especially during acceleration. A damaged suspension system is even more troublesome, causing clunking noises when going over speed bumps. Wind resistance issues should not be ignored either, with whistling sounds from gaps in the doors. A cracked exhaust pipe can lead to inefficient exhaust flow, resulting in a puffing sound. Loose internal components in seats or doors can also contribute to increased noise. If you notice unusual noise while driving, it's best to get it checked early—delaying can make the problem worse and even affect safety. I generally recommend regular maintenance, such as replacing old tires or inspecting engine components, which can effectively reduce noise levels.
Was this review help?
3
5
Share
Expand All
LaNova
09/27/25 6:42am
I've experienced loud noises while driving a sedan, and it's mostly due to mechanical issues. Unbalanced or irregularly worn tires produce a noticeable humming sound at high speeds. Carbon buildup or oil accumulation in the engine results in a harsh noise at high RPMs. Worn-out suspension shock absorbers creak on bumpy roads. Aging door seals let wind seep in, causing unwanted noise. Deteriorated soundproofing materials also amplify external sounds. My old car once made grinding noises due to worn brake pads. Addressing these issues promptly improves comfort—don’t underestimate it, as excessive noise can be distracting and lead to accidents. Listen for changes in sound; a quick self-check or a professional adjustment is better than ignoring the problem.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

Is a locomotive the same as a motorcycle?

Locomotive refers to a motorcycle, which is commonly called a locomotive in Taiwan and Japan. Here is some relevant information about motorcycles: Definition: A motorcycle is a two or three-wheeled vehicle powered by a gasoline engine, steered by handlebars for front-wheel turning. It is lightweight, flexible, and fast, widely used for patrols, passenger and cargo transportation, and also serves as sports equipment. Classification: Broadly categorized, motorcycles include street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. A motorcycle consists of five main parts: the engine, transmission system, running gear, steering, braking system, and electrical instrumentation.
6
2
Share

Will the Tire Pressure of New Car Tires Gradually Decrease?

New car tire pressure will gradually decrease. If the car is left unused for too long, the tire pressure will drop. In fact, the tire pressure when the car leaves the factory is closer to the upper limit of the safe range, but as the car sits unused for longer periods, the tire pressure will change. Some manufacturers intentionally lower the tire pressure to prevent excessively high speeds. Since new cars require an adaptation period, during this time, to prevent high speeds that could lead to traffic hazards, the tire pressure is slightly reduced. Tire damage: If there is an issue with the tires when leaving the factory or if the tires are punctured during use, when the low tire pressure alarm for new car tires is triggered, carefully check whether the tires are damaged. Hazards of low tire pressure: Increased fuel consumption: Low tire pressure increases the contact area between the tires and the ground, thereby increasing tire friction, which leads to greater driving resistance and naturally higher fuel consumption. Shortened tire lifespan: Similarly, due to the larger contact area with the ground, tire wear is accelerated, reducing the tire's service life. Increased risk of blowouts: The increased friction causes the tire temperature to rise, making the tires softer and reducing their strength. When the tires are insufficient to support the vehicle's load, especially during high-speed driving, blowouts are more likely to occur.
18
3
Share

Are there shared cars in Wuhan?

Wuhan has shared car services such as Pand Auto, Tukuanyi, and E-Liu available for users. Below is relevant information about shared cars: Development: Starting in 2015, shared cars became a hot trend, with platforms like Gofun, Tuge, Shenzhou iCar, EZZY, and Pand Auto being established successively. By 2017, the number of shared car companies even exceeded 300 at one point. Difficulty in profitability: The shared car model is characterized by 'heavy operations, heavy management, and heavy user experience,' and the utilization rate of shared cars is not high. Vehicle costs are difficult to control, and parking fees are expensive, making it hard for shared cars to be profitable.
7
3
Share

What is the maximum speed limit for vehicles when making a U-turn?

According to Article 46 of the "Regulations for the Implementation of the Road Traffic Safety Law", the maximum speed for vehicles when making a U-turn shall not exceed 30 kilometers per hour. Permissible U-turn situations: Presence of U-turn traffic lights or signs; No U-turn prohibition signs but left turns are allowed (no prohibition signs for U-turns); U-turns are permitted at dashed lines; U-turns are allowed at yellow grid lines; U-turns can be made on the side of the green belt with dashed lines. Prohibited U-turn situations: Presence of no U-turn signs or no left turn signs; U-turns are prohibited at crosswalks; U-turns are not allowed when there is no left-turn lane; U-turns are forbidden within the second left-turn lane line; U-turns are prohibited at solid yellow lines; U-turns are not permitted on highways. Precautions for U-turns: When making a U-turn, the left turn signal should be activated in advance, the maximum driving speed shall not exceed 30 kilometers per hour, and it must not hinder other normally moving vehicles and pedestrians.
1
4
Share

What is the reason for the high water temperature of the Piaggio X7?

The reason for the high water temperature of the Piaggio X7 is insufficient coolant and possible leaks, which require immediate inspection. Below are the detailed specifications of this motorcycle: Dimensions: The X7 measures 2060x745x1325mm in length, width, and height, with a wheelbase of 1480mm, a seat height of 760mm, and a curb weight of 182kg. Powertrain: It is equipped with a 244cc water-cooled four-valve single-cylinder engine, delivering a maximum power of 15.6kw/8500rpm and a maximum torque of 21Nm/6500rpm. Features: It comes with upgraded modern technological configurations such as full LED lighting, ABS anti-lock braking system, and ASR traction control.
15
4
Share

What is the fuel tank capacity of the Jimny?

The fuel tank capacity of the Jimny is 40 liters, and it requires 92-octane or higher unleaded gasoline. The Jimny is a compact SUV under the Suzuki brand, with dimensions of 3695 mm in length, 1600 mm in width, and 1705 mm in height, and a wheelbase of 2250 mm. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates low fuel, while nearing F means the tank is full. Maintenance tips for the fuel tank include: Draining accumulated water and sediment from the tank, and checking for leaks at fuel line connections and switches. For fuel tank caps equipped with air and vapor valves, ensure the vent holes are clear. The fuel filler inlet screen should be intact to prevent debris from entering the tank and clogging the fuel lines during refueling. The sealing ring on the fuel filler cap should also be in good condition to prevent fuel spillage while driving.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.